University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Academic/Research unit is "Faculty of Engineering and Physical Sciences > Mechanical Engineering Sciences"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | B | D | F | G | H | J | K | L | M | R | S | V | W | X
Number of items: 41.

A

Adegbite, SA, Fahimi, A, Evans, T, Farrow, J, Jesson, DA, Mulheron, MJ and Smith, PA (2013) TRUNK MAINS FAILURES: THE EFFECT OF CORROSION ON RESIDUAL PIPE STRENGTH In: 4th International Conference on Integrity, Reliability and Failure, 2013-06-23 - 2013-06-27, Funchal, Portugal.

Ahmad, H, Crocombe, AD and Smith, PA (2013) Physically based finite element strength prediction in notched woven laminates under quasi-static loading PLASTICS RUBBER AND COMPOSITES, 42 (3). pp. 93-100.

Al-Weshahi, M, Anderson, A, Tian, G and Makhdoum, B (2013) Validation of simulation model for cogeneration power and water desalination plant Int J Mod Opt, 3 (1). pp. 46-53.

Aubrun, S, Loyer, S, Hancock, PE and Hayden, P (2013) Wind turbine wake properties: Comparison between a non-rotating simplified wind turbine model and a rotating model JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 120. pp. 1-8.

Avisar, D, Horovitz, I, Mamane, H, Lozzi, L, Ruggieri, F, Baker, M and Abel, M-L (2013) Impact of water quality on removal of carbamazepine in natural waters by N-doped TiO photo-catalytic thin film surfaces Journal of Hazardous Materials, 244-24. pp. 463-471.

B

Babar, S, Sellin, PJ, Watts, JF and Baker, MA (2013) An XPS study of bromine in methanol etching and hydrogen peroxide passivation treatments for cadmium zinc telluride radiation detectors Applied Surface Science, 264. pp. 681-686.

Bell, SJ, Schneider, A, Seller, P, Veale, MC, Wilson, MD, Baker, MA, Perumal, V, Sellin, PJ, Chen, H and Marthandam, P (2013) A multi-technique characterization of electroless gold contacts on single crystal CdZnTe radiation detectors Journal of Physics D: Applied Physics, 46 (45).

Best, JM, Abásolo, D, Morgado da Silva, R, Alcaraz, R and Rieta, JJ (2013) Analysis of Electrocardiogram Recordings with Advanced Non-linear Methods for the Evaluation of Atrial Fibrillation Organisation In: 7th United Kingdom & Republic of Ireland Postgraduate Conference in Biomedical Engineering and Medical Physics (PGBiomed 2013), 2013-07-10 - 2013-07-11, Guildford, UK.

Bland, David, Kinloch, Anthony and Watts, JF (2013) The Role of the Surface Pretreatment in the Durability of Aluminium-Alloy Structural Adhesive Joints: Mechanisms of Failure The Journal of Adhesion, 89 (5). pp. 369-397.

D

De Novellis, , Sorniotti, A and Gruber, P (2013) Wheel Torque Distribution Criteria for Electric Vehicles With Torque-Vectoring Differentials IEEE Transactions on Vehicular Technology.

De Novellis, L, Sorniotti, A and Gruber, P (2013) Design and comparison of the handling performance of different electric vehicle layouts PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING.

De Novellis, L, Sorniotti, A and Gruber, P (2013) Optimal Wheel Torque Distribution for a Four-Wheel-Drive Fully Electric Vehicle SAE International Journal of Passenger Cars: Mechanical Systems, 6 (1). pp. 128-136.

Duarte, DD, Bell, SJ, Lipp, J, Schneider, A, Seller, P, Veale, MC, Wilson, MD, Baker, MA, Sellin, PJ, Kachkanov, V and Sawhney, KJS (2013) Edge effects in a small pixel CdTe for X-ray imaging JOURNAL OF INSTRUMENTATION, 8, ARTN P.

F

Fishpool, DT, Rezai, A, Baker, D, Ogin, SL and Smith, PA (2013) Interlaminar toughness characterisation of 3D woven carbon fibre composites PLASTICS RUBBER AND COMPOSITES, 42 (3). pp. 108-114.

G

García, M, Poza, J, Hornero, R, Santamarta, D, Barrio, P and Abásolo, D (2013) Spectral analysis of intracranial pressure signals recorded during infusion studies in patients with hydrocephalus Medical Engineering and Physics, 35 (10). pp. 1490-1498.

Gopal, V, Whiting, MJ, Chew, JW and Mills, S (2013) Thermal contact conductance and its dependence on load cycling INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 66. pp. 444-450.

Guest, NT, Tilbrook, DA, Ogin, SL and Smith, PA (2013) Characterization and modeling of diglycidyl ether of bisphenol-a epoxy cured with aliphatic liquid amines Journal of Applied Polymer Science, 130 (5). pp. 3130-3141.

H

Hafiz, TA, Abdel-Wahab, MM, Crocombe, AD and Smith, PA (2013) Mixed-mode fatigue crack growth in FM73 bonded joints INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 40. pp. 188-196.

Hancock, PE, Zhang, S and Hayden, P (2013) A Wind-Tunnel Artificially-Thickened Simulated Weakly Unstable Atmospheric Boundary Layer BOUNDARY-LAYER METEOROLOGY, 149 (3). pp. 355-380.

Harris, AJ, Vaughan, B, Burnage, ST, Yeomans, JA and Smith, PA (2013) Surface preparation of alumina for improved adhesive bond strength in armor applications Ceramic Engineering and Science Proceedings, 33 (5). pp. 149-159.

Harris, AJ, Vaughan, B, Burnage, ST, Yeomans, JA and Smith, PA (2013) Surface preparation of silicon carbide for improved adhesive bond strength in armour applications Journal of the European Ceramic Society, 33 (15-16). pp. 2925-2934.

J

Joodatnia, P, Kumar, P and Robins, A (2013) Fast response sequential measurements and modelling of nanoparticles inside and outside a car cabin Atmospheric Environment, 71. pp. 364-375.

K

Kimpton, CI, Crocombe, AD, Bradley, WN and Gavin Huw Owen, B (2013) Analysis of Stem Tip Pain in Revision Total Knee Arthroplasty. J Arthroplasty, 28 (6). pp. 971-977.

L

Lappas, V, Fernandez, JM, Stohlman, O, Viquerat, A, Prassinos, G, Theodorou, T and Schenk, M (2013) Demonstrator Flight Missions at the Surrey Space Centre involving Gossamer Sails In: The Third International Symposium on Solar Sailing, 2013-06-11 - 2013-06-13, Glasgow, Scotland, UK.

M

Mallinson, CF and Castle, JE (2013) Beryllium and Beryllium Oxide by XPS Surface Science Spectra, 20. pp. 86-96.

Mallinson, CF, Castle, JE and Watts, JF (2013) Analysis of the Be KLL Auger Transition on Beryllium and Beryllium Oxide by AES Surface Science Spectra, 20 (1). pp. 97-112.

Mallinson, CF, Castle, JE and Watts, JF (2013) Analysis of the Li KLL Auger Transition on Freshly Exposed Lithium and Lithium Surface Oxide by AES Surface Science Spectra, 20. pp. 113-127.

Martínez, A, Abásolo, D, Alcaraz, R and Rieta, JJ (2013) A Study on the Applicability of Non-Linear Analysis of P-wave Duration Over Time to Predict Atrial Fibrillation Onset In: 7th United Kingdom & Republic of Ireland Postgraduate Conference in Biomedical Engineering and Medical Physics (PGBiomed 2013), 2013-07-10 - 2013-07-11, Guildford, UK.

McParlin, S, Ward, S and Birch, DM (2013) Optimal calibration of directional velocity probes In: 51st AIAA Aerospace Sciences Meeting, 2013-01-07 - 2013-01-10, Grapevine, TX.

Morgado da Silva, R and Abásolo, D (2013) Electroencephalogram Lempel-Ziv Complexity Analysis in Alzheimer's Disease with Different Coarse Graining Techniques In: 7th United Kingdom & Republic of Ireland Postgraduate Conference in Biomedical Engineering and Medical Physics (PGBiomed 2013), 2013-07-10 - 2013-07-11, Guildford, UK.

R

Razak, MAA, Hoettges, KF, Fatoyinbo, HO, Labeed, FH and Hughes, MP (2013) Efficient dielectrophoretic cell enrichment using a dielectrophoresis-well based system BIOMICROFLUIDICS, 7 (6), ARTN 0.

S

Shimizu, Kyoko, Abel, M-L, Phanopoulos, Christopher, Holvoet, Servaas and Watts, JF (2013) A ToF-SIMS Investigation of the Thermodynamics and Bonding of Polymeric Methylene Diphenyl Diisocyanate on Oxidised Aluminium and Iron Surfaces RSC Advances, 3. pp. 10754-10763.

Simpson, RJS, Palacios, R and Murua, J (2013) Induced Drag Calculations in the Unsteady Vortex Lattice Method AIAA Journal: devoted to aerospace research and development, 51 (7).

Sorniotti, A (2013) A novel clutchless multiple-speed transmission for electric axles International Journal of Powertrains, 2 (2/3). pp. 103-131.

Sugiman, S, Crocombe, AD and Aschroft, IA (2013) Experimental and numerical investigation of the static response of environmentally aged adhesively bonded joints INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 40. pp. 224-237.

Sugiman, S, Crocombe, AD and Aschroft, IA (2013) Modelling the static response of unaged adhesively bonded structures ENGINEERING FRACTURE MECHANICS, 98. pp. 296-314.

Sugiman, S, Crocombe, AD and Aschroft, IA (2013) The fatigue response of environmentally degraded adhesively bonded aluminium structures INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 41. pp. 80-91.

V

Viquerat, AD and Guest, SD (2013) Designing folding rings using polynomial continuation Journal of Mechanisms and Robotics, 6 (1).

Viquerat, AD, Hutt, T and Guest, SD (2013) A plane symmetric 6R foldable ring Mechanism and Machine Theory, 63. pp. 73-88.

W

Waters, RE, Whiting, Mark and Stolojan, Vlad (2013) Examining the Pearlite Growth Interface in a Fe-C-Mn Alloy International Journal of Materials and Metallurgical Engineering, 7 (7). pp. 506-509.

X

Xie, Z-T, Hayden, P and Wood, CR (2013) Large-eddy simulation of approaching-flow stratification on dispersion over arrays of buildings ATMOSPHERIC ENVIRONMENT, 71. pp. 64-74.

This list was generated on Sun Mar 29 22:52:20 2020 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800