Items where Academic/Research unit is "Faculty of Engineering and Physical Sciences > Civil and Environmental Engineering"
|Up a level|
Acikel, AS, Singh, RM, Bouazza, A, Gates, WP and Rowe, RK (2015) Applicability and accuracy of the initially dry and initially wet contact filter paper tests for matric suction measurement of geosynthetic clay liners Geotechnique: international journal of soil mechanics, 65 (9). pp. 780-787.
Adaway, M and Wang, Y (2015) Recycled glass as a partial replacement for fine aggregate in structural concrete – Effects on compressive strength Electronic Journal of Structural Engineering, 14 (1). pp. 116-122.
Adegbite, SA (2010) Coating of catalyst supports - links between slurry characteristics, coating process and final coating quality Doctoral thesis, University of Birmingham.
Adegbite, SA (2011) Emissions control catalysts: Links between Fecralloy preoxidation and coating adherence Journal of Chemical Engineering and Materials Science, 2 (10). pp. 168-173.
Adegbite, SA, Barigou, M, Simmons, MJH, Wagland, A and Stitt, EH (2009) Influence of preoxidation on Fecralloy efficacy as a catalyst support In: 8th World Congress of Chemical Engineering, 2009-08-23 - 2009-08-27, Montreal, Canada.
Adegbite, SA, Barigou, M, Simmons, MJH, Wagland, A and Stitt, EH (2009) Influence of preoxidation on Fecralloy efficacy as a catalyst support In: 8th World Congress of Chemical Engineering, Montreal, Canada.
Akhigbe, L, Ouki, S and Saroj, DP (2016) Disinfection and removal performance for Escherichia coli and heavy metals by silver-modified zeolite in a fixed bed column Chemical Engineering Journal.
Al-Dabbous, AN and KUMAR, P (2015) Source apportionment of airborne nanoparticles in a Middle Eastern city using positive matrix factorization Environmental Science: Processes & Impacts, 17. pp. 802-812.
Al-Dabbous, AN and Kumar, P (2014) The influence of roadside vegetation barriers on airborne nanoparticles and pedestrians exposure under varying wind conditions Atmospheric Environment, 90. pp. 113-124.
Al-Otaibi, FA, Wegian, FM, Alnaki, AA, Almutairi, SKH and Singh, RM (2012) Effect of bitumen addition on the long-term permeability of sabkha soil Kuwait Journal of Science and Engineering, 39 (2(B)). pp. 131-148.
Al–Dabbous, AN, Kumar, P and Khan, AR (2016) Prediction of Airborne Nanoparticles at Roadside Location Using a Feed–Forward Artificial Neural Network Atmospheric Pollution Research.
SAROJ, Devendra (2010) Method for depuration of wastewaters with reduction of sludge production and plant thereof WO2010/122500.
Arany, L, Bhattacharya, S, Macdonald, J and Hogan, SJ (2017) Design of monopiles for offshore wind turbines in 10 steps Soil Dynamics and Earthquake Engineering, 92. pp. 126-152.
Argyroudis, S, Palaiochorinou, A, Mitoulis, S and Pitilakis, D (2016) Use of rubberised backfills for improving the seismic response of integral abutment bridges Bulletin of Earthquake Engineering.
Assis, W, Bittencourt, T, Matos, J, Moreira De Sousa, HF and Figueiras, J (2006) An Integrated System for Structural Behaviour Visualization In: The Second Congress fib, 2006-06-05 - ?, Naples, Italy.
Assis, W, Matos, J, Moreira De Sousa, HF, Figueiras, J and Bittencourt, T (2005) Sistema de Visualização do comportamento estrutural da Ponte sobre o Rio Sorraia In: IBRACON – 47° Congresso Brasileiro do Concreto, 2005-09-02 - ?, Olinda, PE, Brazil.
Auwerter, LCC, Ouki, SK, Asaadi, M and Shana, A (2017) EFFECTS OF NANOSIZED TITANIUM DIOXIDE (TiO2) AND FULLERENE (C60) ON WASTEWATER MICROORGANISMS ACTIVITY Journal of Water Process Engineering.
Azarmi, F and Kumar, P (2016) Ambient exposure to coarse and fine particle emissions from building demolition Atmospheric Environment, 137. pp. 62-79.
Azarmi, F, Kumar, P, Kumar, P, Mulheron, M, Colaux, JL, Jeynes, C, Adhami, S and Watts, JF (2015) Physicochemical characteristics and occupational exposure to coarse, fine and ultrafine particles during building refurbishment activities Journal of Nanoparticle Research, 17 (8).
Azarmi, F, Kumar, P, Marsh, D and Fuller, G (2015) Assessment of the long-term impacts of PM10 and PM2.5 particles from construction works on surrounding areas. Environmental Science: Processes & Impacts.
Azarmi, F, Kumar, P and Mulheron, M (2014) The exposure to coarse, fine and ultrafine particle emissions from concrete mixing, drilling and cutting activities Journal of Hazardous Materials, 279. pp. 268-279.
BEHNEJAD, S ALIREZA, PARKE, G A R and NOOSHIN, HOAHYAR (2013) Sphere Packing for Regularisation of Lattice Domes In: The International Association for Shell and Spatial Structures 2013 Symposium, 23-27 September 2013, Wroclaw, Poland.Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw.
BEHNEJAD, S Alireza, PARKE, Gerard and NOOSHIN, Hoshyar (2013) Member Length Regularity of Lattice Domes In: 9th Congress of the International Society of Interdisciplinary Study of Symmetry, 9-15 Sep 2013, Crete Island, Greece.
BEHNEJAD, S. ALIREZA, MOTTAGHI RAD, ARMIN and JAMILI, HOSSEIN (2012) Traditional Components of Iranian Vernacular Architecture in Contemporary Projects In: Folk Architecture, 8-10 June 2012, Budapest, Hungary.
BEHNEJAD, S. ALIREZA and PARKE, G A R Half a Century with the Space Structures Research Centre of the University of Surrey In: the 2014 Symposium of the International Association for Shell and Spatial Structures, 15-19 September 2014, Brasilia.
BEHNEJAD, S. ALIREZA and PARKE, G A R (2014) Half a Century with the Space Structures Research Centre of the University of Surrey International Journal of Space Structures, 29 (4). pp. 205-214.
BEHNEJAD, S. ALIREZA, PARKE, G A R and NOOSHIN, Hoshyar (2015) Teaching Spatial Structures: Who to Teach, What to Teach and How to Teach In: International Association for Shell and Spatial Structures (IASS) Symposium 2015, 17 - 20 August 2015, Amsterdam, The Netherlands.
BEHNEJAD, S. ALIREZA and ZAHEDI, MARYAM (2010) Symmetry in Traditional Persian Poetry In: 8th Interdisciplinary Symmetry Festival-Congress of ISIS-Symmetry, 23-28 August 2010, Gmund, Austria.
Bain, R, Woodall, C, Elliott, J, Arnold, B, Tung, R, Morley, R, du Preez, M, Bartram, J, Davis, A, Gundry, S and Pedley, S (2015) Evaluation of an inexpensive growth medium for direct detection of Escherichia coli in temperate and sub-tropical waters PLoS One, 10 (10), e0140997.
Bain, RES, Gundry, SW, Wright, JA, Yang, H, Pedley, S and Bartram, JK (2012) Accounting for water quality in monitoring the Millennium Development Goal on access to safe drinking-water: lessons from five countries. Bulletin of the World Health Organization, 90 (3), BLT.11. pp. 228-235.
Bajaj, N, Sharma, T, Suneja, D, Jain, S and Kumar, P (2017) Determinants of respiratory and cardiovascular health impacts of traffic policemen: A perception based comparative analysis Journal of Transport and Health.
Barry-Macaulay, D, Bouazza, A, Singh, RM, Wang, B and Ranjith, PG (2013) Thermal conductivity of soils and rocks from the Melbourne (Australia) region Engineering Geology, 164. pp. 131-138.
Barry-Macaulay, D, Bouazza, A, Wang, B and Singh, RM (2015) Evaluation of soil thermal conductivity models Canadian Geotechnical Journal, 52 (11). pp. 1892-1900.
Bartram, J (2015) Routledge Handbook of Water and Health Routledge. ISBN 1317436997
Bartram, J, Charles, K, Evans, B, O'Hanlon, L and Pedley, S (2012) Commentary on community-led total sanitation and human rights: should the right to community-wide health be won at the cost of individual rights? Journal of Water and Health, 10 (4). pp. 499-503.
Behnejad, SA (2016) Benefits of Full-scale Physical Models in Civil Engineering Education In: 123rd Annual Conference of the American Society for Engineering Education - ASEE 2016, 2016-06-26 - 2016-06-29, New Orleans, LA, USA.
Behnejad, SA and Parke, GAR (2014) Half a century with the space structures research centre of the University of Surrey International Journal of Space Structures, 29 (4). pp. 205-214.
Behnejad, SA and Parke, GAR (2015) Z S Makowski: A Pioneer of Space Structures International Journal of Space Structures, 30 (3 - 4). pp. 191-201.
Bhattacharya, S (2016) Closed form solution of Eigen frequency of monopile supported offshore wind turbines in deeper waters incorporating stiffness of substructure and SSI International Journal of Soil Dynamics and Earthquake Engineering, Volume. pp. 18-32.
Bhattacharya, S (2013) Collapse of Showa Bridge revisited http://casehistories.geoengineer.org/volume/volume3/issue1/IJGCH_3_1_3.html, 3 (1). pp. 24-35.
Bhattacharya, S (2012) Dynamic Soil-Structure Interaction issues in designing offshore wind turbines In: Proceedings of International Symposium on Coastal and Offshore Geotechnics, 2012-11-16 - 2012-11-18, Hangzhou.
Bhattacharya, S and Alexander, N (2014) Obtaining Spectrum Matching Time Series Using a Reweighted Volterra Series Algorithm (RVSA) Bulletin of the Seismological Society of America, 104 (4). pp. 1663-1673.
Bhattacharya, S, Carrington, T and Aldridge, T (2009) Observed increases in offshore pile driving resistance Proceedings of the Institution of Civil Engineers-Geotechnical engineering, 162, 1. pp. 71-80.
Bhattacharya, S, Cox, J and Lombardi, D (2013) Dynamics of offshore wind turbines on two types of foundations Proceedings of the Institution of Civil Engineers: Geotechnical Engineering.
Bhattacharya, S and Goda, K (2016) Use of offshore wind farms to increase seismic resilience of Nuclear Power Plants Soil Dynamics and Earthquake Engineering, 80. pp. 65-68.
Bhattacharya, S, Lombardi, D and Wood, DM (2011) Similitude relationships for physical modelling of monopile-supported offshore wind turbines International Journal of Physical Modelling in Geotechnics, 11, 2. pp. 58-68.
Bhattacharya, S, Macabuag, J and Gurgain, R (2012) Seismic retrofitting of non-engineered masonry in rural Nepal Proceedings of the Institution of Civil Engineers: Structures and Buildings, 6. pp. 273-286.
Bhattacharya, S, Nikitas, G and Vimalan, N (2016) An innovative cyclic loading device to study long term performance of offshore wind turbines Soil Dynamics and Earthquake Engineering, 82. pp. 154-160.
Bhattacharya, S, Nikitas, G, Yu, L, Wang, L-Z and Guo, Z (2015) Long-term dynamic behavior of monopile supported offshore wind turbines in sand Theoretical and Applied Mechanics Letters, 5 (2). pp. 80-84.
Bhattacharya, S and Shadlou, M (2016) Dynamic stiffness of monopile supporting offshore wind turbine generators Soil Dynamics and Earthquake Engineering, 88. pp. 15-32.
Bolton, MD (2004) An alternative mechanism of pile failure in liquefiable deposits during earthquakes Géotechnique, 54. 203-213(10) - 203-213(10).
Bouazza, A, Singh, RM, Rowe, RK and Gassner, F (2014) Heat and moisture migration in a geomembrane–GCL composite liner subjected to high temperatures and low vertical stresses Geotextiles and Geomembranes,, 42 (5). pp. 555-563.
Bouazza, A, Singh, RM, Wang, B, Barry-Macaulay, D, Haberfield, C, Chapman, G, Baycan, S and Carden, Y (2011) Harnessing on site renewable energy through pile foundations Australian Geomechanics Journal, 46 (4). pp. 79-90.
Bouazza, A, Zornberg, J, McCartney, JS and Singh, RM (2013) Unsaturated geotechnics applied to geoenvironmental engineering problems involving geosynthetics Engineering Geology, 165. pp. 143-153.
Brainard, J, Hunter, P, Hooper, L, Pond, K and Edmunds, K (2015) Risk Factors for Transmission of Ebola or Marburg Virus Disease: A Systematic Review and Meta-analysis International Journal of Epidemiology.
Brainard, J, Pond, K and Hunter, P (2017) Censored regression modelling to predict virus inactivation in wastewaters Environmental Science and Technology.
Brainard, J, Pond,, K, Hooper, L, Edmunds, K and Hunter, P (2016) Presence and Persistence of Ebola or Marburg Virus in Patients and Survivors: A Rapid Systematic Review PLoS Neglected Tropical Diseases, 10 (2).
Brunskill, C, Patel, N, Gouache, TP, Scott, GP, Saaj, CM, Matthews, M and Cui, L (2011) Characterisation of martian soil simulants for the ExoMars rover testbed Journal of Terramechanics, 48 (6). pp. 419-438.
Bukhari, IA, Ahmad, S, Vollum, R and Sagaseta, J (2013) Shear Strengthening of Short Span Reinforced Concrete Beams with CFRP Sheets Arabian Journal for Science and Engineering, 38 (3). pp. 523-536.
Bukhari, IA, Vollum, RL, Ahmad, S and Sagaseta, J (2010) Shear strengthening of reinforced concrete beams with CFRP MAGAZINE OF CONCRETE RESEARCH, 62 (1). pp. 65-77.
Carpentieri, M, Kumar, P and Robins, A (2012) Wind tunnel measurements for dispersion modelling of vehicle wakes Atmospheric Environment, 62. pp. 9-25.
Cavarretta, I, O'Sullivan, C and Coop, MR (2009) Applying 2D shape analysis techniques to granular materials with 3D particle geometries In: 6th International Conference on the Micromechanics of Granular Media, 2009-07-13 - 2009-07-17, Golden, CO.
Chenoweth, J, Lopez-Aviles, A, Druckman, A and Morse, S (2016) Options for reducing household water use in the UK: the potential of servicised systems Built Environment, 42 (2). pp. 294-305.
Chenoweth, J, Lopez-Aviles, A, Morse, S, Druckman, A, Plepys, A, Nebelius, A, Mont, O and Kaufman, D (2013) SPREE Water Sector Report Deliverable 5.1 [Report]
Chryssanthopoulos, MK, Janssens, V and Imam, B Modelling of Failure Consequences for Robustness Evaluation In: IABSE–IASS Symposium: Taller, Longer, Lighter, 2011-09-20 - 2011-09-23, London, UK.
Chu, W, Ding, S, Bond, TG, Gao, N, Yin, D and Xu, B (2016) Zero valent iron produces dichloroacetamide from chloramphenicol antibiotics in the absence of chlorine and chloramines Water Research, 104. pp. 254-261.
Chu, W, Hu, J, Bond, TG, Naiyun, G, Bin, X and Yin, D (2016) Water temperature significantly impacts the formation of iodinated haloacetamides during persulfate oxidation Water Research, 98. pp. 47-55.
Chu, W, Li, X, Bond, TG, Gao, N, Bin, X, Wang, Q and Ding, S (2016) Copper increases reductive dehalogenation of haloacetamides by zero-valent iron in drinking water: Reduction efficiency and integrated toxicity risk Water Research, 107. pp. 141-150.
Chu, W, Tengfei, C, Bond, TG, Du, E, Yingqing, G and Naiyun, G (2016) Impact of persulfate and ultraviolet light activated persulfate pre-oxidation on the formation of trihalomethanes, haloacetonitriles and halonitromethanes from the chlor(am)ination of three antibiotic chloramphenicols. Water Research, 93. pp. 48-55.
Cleall, PJ, Singh, RM and Thomas, HR (2011) Non-isothermal moisture movement in unsaturated kaolin: An experimental and theoretical investigation ASTM Geotechnical Testing Journal, 34 (5). pp. 514-524.
Cleall, PJ, Singh, RM and Thomas, HR (2013) Vapour transfer in unsaturated compacted bentonite Geotechnique: international journal of soil mechanics, 63 (11). pp. 957-964.
Cottee, J, Lopez-Aviles, A, Behzadian, K, Bradley, D, Butler, D, Downing, C, Farmani, R, Ingram, J, Leach, M, Pike, A, De Propris, L, Purvis, L, Robinson, P and Yang, A (2016) The Local Nexus Network: Exploring the Future of Localised Food Systems and Associated Energy and Water Supply In: Sustainable Design and Manufacturing 2016 (Smart Innovation Systems and Technologies). Special Volume. Springer, pp. 613-624. ISBN 3319320963
Cox, JA and Bhattacharya, S (2016) Serviceability of Suction Caisson Founded Offshore Structures Proceedings of the Institution of Civil Engineers: Geotechnical Engineering.
Cui, L and Avramidis, S (2013) Effects of Granular Soil Micro-Mechanics on the Pressure-Sinkage Relationship In: 7th International Conference on Micromechanics of Granular Media (Powders and Grains), 2013-07-08 - 2013-07-12, Sydney, AUSTRALIA.
Cui, L and Bhattacharya, S (2016) Soils-structure interaction for monopile supporting OWT Engineering and Computational Mechanics.
Cui, L, Forero Rueda, M and Gilchrist, MD (2009) Optimisation of energy absorbing liner for equestrian helmets In: 27th International Conference on Biomechanics in Sports, 2009-08-17 - ?, Limerick, Ireland.
Cui, L, Kiernan, S and Gilchrist, MD (2009) Designing the energy absorption capacity of functionally graded foam materials MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 507 (1-2). pp. 215-225.
Cui, L and O'Sullivan, C Development of a mixed boundary environment for axi-symmetric DEM analyses In: 5th Int’l Conf. on Micromechanics of Granular Media, 2005-07-18 - ?, Stuttgart, Germany.
Cui, L, O'Sullivan, C and O'Neil, S Coupling DEM simulations and physical tests to study the load-unload response of an ideal granular material In: Discrete Element Methods (DEM) 07, 2007-08-27 - 2007-08-29, Brisbane, Australia.
Cui, L, O'Sullivan, C and O'Neill, S (2007) An analysis of the triaxial apparatus using a mixed boundary three-dimensional discrete element model GEOTECHNIQUE, 57 (10). pp. 831-844.
Cui, L, Rueda, MAF and Gilchrist, MD (2009) Optimisation of energy absorbing liner for equestrian helmets. Part II: Functionally graded foam liner MATERIALS & DESIGN, 30 (9). pp. 3414-3419.
Dash, SR, Rouholamin, M and Bhattacharya, S (2017) A practical method for construction of p-y curves for liquefiable soils Soil Dynamics and Earthquake Engineering.
Dehghani, MH, Salari, M, Naddafi, K, Nazmara, S, Ahmadi, E and Kumar, P (2017) Evaluation of formaldehyde concentration in the ambient air of a most populated Iranian city, Tehran Air Quality, Atmosphere & Health.
Dehghani, MH, Sanaei, D, Nabizadeh, R, Nazmara, S and Kumar, P (2017) Source apportionment of BTEX compounds in Tehran, Iran using UNMIX receptor model Air Quality, Atmosphere & Health.
Dihoru, L, Bhattacharya, S, Moccia, F, Simonelli, AL, Taylor, CA and Mylonakis, G (2016) Dynamic testing of free field response in stratified granular deposits Soil Dynamics and Earthquake Engineering, 84. pp. 157-168.
Faizal, M, Bouazza, A and Singh, RM (2016) Heat transfer enhancement of geothermal energy piles Renewable and Sustainable Energy Reviews, 57. pp. 16-33.
Ferrándiz-Mas, V, Bond, TG, Zhang, Z, Melchiorri, J and Cheeseman, CR (2016) Optimising the bioreceptivity of porous glass tiles based on colonization by the alga Chlorella vulgaris Science of the Total Environment, 563-56. pp. 71-80.
Forero Rueda, M, Cui, L and Gilchrist, MD (2009) Optimisation of energy absorbing liner for equestrian helmets Part I: Layered foam Liner Materials & Design, 30 (9). pp. 3405-3413.
Fujitani, Y, Kumar, P, Tamura, K, Fushimi, A, Hasegawa, S, Takahashi, K, Tanabe, K, Kobayashi, S and Hirano, S (2012) Seasonal differences of the atmospheric particle size distribution in a metropolitan area in Japan Science of the Total Environment, 437. pp. 339-347.
Garcia, J, Cerdeira, R, Tavares, N, Coelho, LMR, Kumar, P and Carvalho, MG (2013) Influence of virtual changes in building configurations of a real street canyon on the dispersion of PM10 Urban Climate, 5. pp. 68-81.
Garcia, JM, Teodoro, F, Cerdeira, R, Coelho, LM, Kumar, P and Carvalho, MG (2016) Developing a methodology to predict PM10 concentrations in urban areas using Generalized Linear Models. Environ Technol. pp. 1-34.
Garia, J, Cerdeira, R, Coelho, L, Kumar, P and Carbalho, MDG (2014) Influence of Pedestrian Trajectories on School Children Exposure to PM10 Journal of Nanomaterials, 2014, 505649.
Gautam, S, Yadav, A, Tsai, CJ and Kumar, P (2016) A review on recent progress in observations, sources, classification and regulations of PM2.5 in Asian environments Environmental Science and Pollution Research, 23 (21). pp. 21165-21175.
George, KV, Patil, DD, Anil, MNV, Kamal, N, Alappat, BJ and Kumar, P (2017) Evaluation of coarse and fine particles in diverse Indian environments Environmental Science and Pollution Research.
George, KV, Patil, DD, Kumar, P and Alappat, BJ (2012) Field comparison of cyclonic separator and mass inertial impactor for PM10 monitoring Atmospheric Environment, 60. pp. 247-252.
Goel, A and Kumar, P (2015) Characterisation of nanoparticle emissions and exposure at traffic intersections through fast–response mobile and sequential measurements Atmospheric Environment, 107. pp. 374-390.
Goel, A and Kumar, P (2016) Vertical and horizontal variability in airborne nanoparticles and their exposure around signalised traffic intersections Environmental Pollution, 214. pp. 54-69.
Goel, A and Kumar, P (2015) Zone of influence for particle number concentrations at signalised traffic intersections Atmospheric Environment, 123, P. pp. 25-38.
Goel, A and Kumar, P (2014) A review of fundamental drivers governing the emissions, dispersion and exposure to vehicle-emitted nanoparticles at signalised traffic intersections ATMOSPHERIC ENVIRONMENT, 97. pp. 316-331.
Goel, A, Kumar, P and Kumar, P (2015) Characterisation of nanoparticle emissions and exposure at traffic intersections through fast-response mobile and sequential measurements Atmospheric Environment, 107. pp. 374-390.
Gouache, TP, Brunskill, C, Scott, G, Saaj, CM, Matthews, M, Cui, L and Patel, N (2011) Soil simulant sourcing for the ExoMars rover testbed Journal of Planetary and Space Science, 59 (8). pp. 779-787.
Goyal, R, Khare, M and Kumar, P (2012) Indoor air quality: Current status, missing links and future road map for India Journal of Civil and Environmental Engineering, 2 (4). pp. 2-4.
Goyal, R and Kumar, P (2013) Indoor-outdoor concentrations of particulate matter in nine microenvironments of a mix-use commercial building in megacity Delhi Air Quality, Atmosphere and Health, 6 (4). pp. 747-757.
Guglielmi, G, Chiarani, D, Saroj, DP and Andreottola, G (2010) Sludge filterability and dewaterability in a membrane bioreactor for municipal wastewater treatment DESALINATION, 250 (2). pp. 660-665.
Gurjar, BR, Nagpure, AS and Kumar, P (2015) Gaseous emissions from agricultural activities and wetlands in national capital territory of Delhi Ecological Engineering, 75. pp. 123-127.
Hagen, A (2002) Approaching human judgement in the automated comparison of categorical maps In: 4th International conference on Recent Advances in Soft Computing, 2002-12-12 - 2002-12-13.
Hagen, A (2003) Fuzzy set approach to assessing similarity of categorical maps International Journal of Geographical Information Science, 17. pp. 235-249.
Hagen-Zanker, A (2009) An improved Fuzzy Kappa statistic that accounts for spatial autocorrelation International Journal of Geographical Information Science, 23. pp. 61-73.
Hagen-Zanker, A and Jin, Y (2011) Reducing aggregation error in spatial interaction models by location sampling In: The 11th International Conference on GeoComputation, 2011-07-20 - 2011-07-22, University College, London.
Hagen-Zanker, A and Lajoie, G (2008) Neutral models of landscape change as benchmarks in the assessment of model performance Landscape and Urban Planning, 86. pp. 284-296.
Hagen-Zanker, A and Martens, P (2011) A framework of map comparison methods to evaluate geosimulation models from a geospatial perspective In: Geocomputation, Sustainability and Environmental Planning. Studies in Computational Intelligence . Springer Berlin / Heidelberg, pp. 251-269. ISBN 978-3-642-19732-1
Hagen-Zanker, A, Straatman, B and Uljee, I (2005) Further developments of a fuzzy set map comparison approach International Journal of Geographical Information Science, 19. pp. 769-785.
Hagen-Zanker, A and Timmermans, HJP (2008) A metric of compactness of urban change illustrated to 22 European countries In: Lecture Notes in Geoinformation and Cartography: The European Information Society, Taking Geoinformation Science One Step Further. Lecture Notes in Geoinformation and Cartography . Springer Berlin Heidelberg, Berlin, pp. 181-200. ISBN 978-3-540-78945-1
Hagen-Zanker, A, van Loon, J, Maas, A, Straatman, B, de Nijs, T and Engelen, G (2005) Measuring performance of land use models: An evaluation framework for the calibration and validation of integrated land use models featuring cellular automata In: Proceedings of the 14th European Colloquium on Theoretical and Quantitative Geography, 2005-09-09 - 2005-09-13.
Hagen-Zanker, AH, Dikanski, H, Imam, B and Avery, K (2016) Climate change impacts on railway structures: bridge scour Proceedings of the Institution of Civil Engineers: Engineering Sustainability.
Hagen-Zanker, AH and Jin, Y (2015) Adaptive Zoning for Efficient Transport Modelling in Urban Models In: Computational Science and Its Applications -- ICCSA 2015. Lecture Notes in Computer Science, 9157 . Springer, pp. 673-687. ISBN 978-3-319-21469-6
Hassan, HA, Kumar, P and Kakosimos, KE (2016) Flux Estimation of Fugitive Particulate Matter Emissions from Loose Calcisols at Construction Sites Atmospheric Environment, 141. pp. 96-105.
He, JB, Li, ZH, Teng, J and Wang, Y (2016) Design and implementation of stress measurement system for steel structures members In: 24th Australasian Conference on the Mechanics of Structures and Materials, 2016-12-06 - 2016-12-09, Perth, Western Australia.
Heal, MR, Kumar, P and Harrison, RM (2012) Particles, air quality, policy and health Chemical Society Reviews.
Imam, B and Chryssanthopoulos, MK (2010) A review of metallic bridge failure statistics In: IABMAS 2010, 2010-07-11 - 2010-07-15, Philadelphia, USA.
Imam, B, Chryssanthopoulos, MK and Frangopol, DM System effects on the fatigue reliability of deteriorating riveted railway bridges In: ICOSSAR2009, 2009-09-13 - 2009-09-17, Osaka, Japan.
Imam, B, Kaliyaperumal, G, Righiniotis, T and Chryssanthopoulos, MK (2011) Dynamic FE analysis of a continuous steel railway bridge and comparisons with field measurements In: 12th International Conference on Metal Structures (ICMS), 2011-06-15 - 2011-06-17, Wroclaw, Poland.
Imam, B, Rafiq, MI and Kumar, P (2011) Improving student learning in engineering discipline using student- and lecturer-led assessment approaches European Journal of Higher Education, 1 (2-3). pp. 233-248.
Imam, B, Righiniotis, TD and Chryssanthopoulos, MK Connection fixity effects on stress histories in riveted rail bridges In: IABMAS'04, 2004-10-19 - 2004-10-22, Kyoto, Japan.
Imam, B, Righiniotis, TD and Chryssanthopoulos, MK (2005) Fatigue assessment of riveted railway bridges Steel Structures, 5 (5). pp. 485-494.
Imam, B, Righiniotis, TD and Chryssanthopoulos, MK Fatigue crack initiation in riveted railway bridge connections In: Proceedings of the 1st International Conference on Fatigue and Fracture in the Infrastructure, Bridges and Structures of the 21st Century, 2006-08-06 - 2006-08-09, Philadelphia, USA.
Imam, B, Righiniotis, TD and Chryssanthopoulos, MK (2009) Global-local finite element analysis of riveted railway bridge connections for fatigue evaluation In: Proceedings of the 4th International Conference on Bridge Maintenance, 2008 - ?, Seoul, Korea.
Imam, B, Righiniotis, TD and Chryssanthopoulos, MK (2005) Remaining fatigue life estimates for riveted railway bridges In: 5th International Conference on Bridge Management, 2005-04-11 - 2005-04-13, Guildford, UK.
Imam, B, Righiniotis, TD, Chryssanthopoulos, MK and Bell, B Probabilistic fatigue life estimates for riveted railway bridges In: IABMAS '06, 2006-07-16 - 2006-07-19, Porto, Portugal.
Imam, BM and Chryssanthopoulos, MK (2012) Causes and consequences of metallic bridge failures Structural Engineering International: Journal of the International Association for Bridge and Structural Engineering (IABSE), 22 (1). pp. 93-98.
Imam, BM, Chryssanthopoulos, MK and Frangopol, DM (2012) Fatigue system reliability analysis of riveted railway bridge connections Structure and Infrastructure Engineering, 8 (10). pp. 967-984.
Imam, BM and Collins, J (2013) Assessment of flat deck metallic plates - Yield line and membrane analyses Journal of Constructional Steel Research, 82. pp. 131-141.
Imam, BM and Kaliyaperumal, G (2012) Fatigue assessment of a railway bridge detail using dynamic analysis and probabilistic fracture mechanics In: The 6th International Conference on Bridge Maintenance, Safety and Management (IABMAS 2012), 2012-07-08 - 2012-07-12, Lake Como, Italy.
Imam, BM and Righiniotis, TD (2010) Fatigue evaluation of riveted railway bridges through global and local analysis Journal of Constructional Steel Research, 66 (11). pp. 1411-1421.
Imam, BM, Righiniotis, TD and Chryssanthopoulos, MK (2007) Numerical modelling of riveted railway bridge connections for fatigue evaluation Engineering Structures, 29 (11). pp. 3071-3081.
Imam, BM, Righiniotis, TD and Chryssanthopoulos, MK (2007) Probabilistic fatigue load spectra for riveted railway bridges In: 10th International Conference on Application of Statistics and Probability in Civil Engineering, 2007-07-31 - 2007-08-31, Tokyo, Japan.
Imam, BM, Righiniotis, TD, Chryssanthopoulos, MK and Bell, B (2006) Probabilistic fatigue life estimates for riveted railway bridges
Jabbour, N, Jayaratne, ER, Johnson, GR, Alroe, J, Uhde, E, Salthammer, T, Cravigan, L, Faghihi, EM, Kumar, P and Morawska, L (2017) A Mechanism for the Production of Ultrafine Particles from Concrete Fracture Environmental Pollution.
Jain, S, Aggarwal, P, Kumar, P, Singhal, S and Sharma, P (2014) Identifying public preferences using multi-criteria decision making for assessing the shift of urban commuters from private to public transport: A case study of Delhi Transportation Research Part F: Traffic Psychology and Behaviour, 24. pp. 60-70.
Jain, S, Aggarwal, P, Sharma, P and Kumar, P (2016) Vehicular exhaust emissions under current and alternative future policy measures for megacity Delhi, India Journal of Transport & Health, 3 (3). pp. 404-412.
Jenneson, P M, Luggar, R D, Morton, E J, Gundogdu, O and Tuzun, U (2004) Examining Nanoparticle Assemblies Using High Spatial Resolution X-ray Microtomography Journal of Applied Physics, 96 (5).
Jiang, M, Fu, C, Cui, L, Shen, Z and Zhu, F (2016) DEM simulations of methane hydrate exploitation by thermal recovery and depressurization methods Computers and Geotechnics.
Jiang, M, Sima, J, Li, L, Zhou, C and Cui, L (2016) Investigation of influence of particle characteristics on the non-coaxiality of anisotropic granular materials using DEM International Journal for Numerical and Analytical Methods in Geomechanics.
Jiang, MJ, Dai, YS, Cui, L, Shen, ZF and Wang, XX (2014) Investigating mechanism of inclined CPT in granular ground using DEM Granular Matter, 16 (5). pp. 785-796.
Joodatnia, P, Kumar, P and Robins, A (2013) The behaviour of traffic produced nanoparticles in a car cabin and resulting exposure rates Atmospheric Environment, 65. pp. 40-51.
Kalfas, KN, Mitoulis, S and Katakalos, K (2017) Numerical study on the response of steel-laminated elastomeric bearings subjected to variable axial loads and development of local tensile stresses Engineering Structures.
Kaliyaperumal, G, Imam, B and Righiniotis, T (2011) Advanced Dynamic Finite Element Analysis of a Skew Steel Railway Bridge Engineering Structures, 33 (1). pp. 181-190.
Kallias, A and Imam, B (2015) Probabilistic assessment of local scour in bridge piers under changing environmental conditions Structure and Infrastructure Engineering: maintenance, management, life-cycle design and performance, 12 (9). pp. 1228-1241.
Kallias, AN, Imam, B and Chryssanthopoulos, MK (2016) Performance profiles of metallic bridges subject to coating degradation and atmospheric corrosion Structure and Infrastructure Engineering: maintenance, management, life-cycle design and performance.
Katiyar, R, Gurjar, BR, Biswas, S, Pruthi, V, Kumar, N and Kumar, P (2016) Microalgae: An emerging source of energy based bio-products and a solution for environmental issues Renewable and Sustainable Energy Reviews.
Khanum, F, Chaudhry, MN and Kumar, P (2017) Characterization of five-year observation data of fine particulate matter in the metropolitan area of Lahore Air Quality, Atmosphere & Health.
Kiernan, S, Cui, L and Gilchrist, MD (2009) Novel Energy Absorbing Materials with Applications in Helmeted Head In: 27th International Conference on Biomechanics in Sports, 2009-08-17 - ?, Limerick, Ireland.
Kiernan, S, Cui, L and Gilchrist, MD (2009) Propagation of a stress wave through a virtual functionally graded foam INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 44 (5). pp. 456-468.
Kiernan, S, Cui, L and Gilchrist, MD (2010) A numerical investigation of the dynamic behaviour of functionally graded foams IUTAM Bookseries, 19. pp. 15-24.
Kleemann, R, Chenoweth, J, Clift, R, Morse, S, Pearce, P and Saroj, DP (2016) Comparison of phosphorus recovery from incinerated sewage sludge ash (ISSA) and pyrolysed sewage sludge char (PSSC) Waste Management, 60. pp. 201-210.
Kleemann, R, Chenoweth, J, Clift, R, Morse, S, Pearce, P and Saroj, DP (2015) Evaluation of local and national effects of recovering phosphorus at wastewater treatment plants: Lessons learned from the UK Resources, Conservation and Recycling.
Kumar, P (2011) Footprints of Airborne Ultrafine Particles on Urban Air Quality and Public Health Journal of Civil and Environmental Engineering, 1 (e101).
Kumar, P (2008) Pseudo-simultaneous measurements for the vertical variation of coarse, fine and ultrafine particles in an urban street canyon Atmospheric Environment, 42 (18). pp. 4304-4319.
Kumar, P (2008) Treatment of losses of ultrafine aerosol particles in long sampling tubes during ambient measurements Atmospheric Environment, 42 (38). pp. 8819-8823.
Kumar, P and Abdulsaheb, A Influence of street canyon geometries on the dispersion of nanoparticles In: 18th International Symposium on Transport and Air Pollution, Dubendorf, Switzerland, 18-19 May 2010, 2010-05-18 - 2010-05-19, Dubendorf, Switzerland.
Kumar, P, Andrade, MF, Ynoue, RY, Fornaro, A, Dias de Freitas, E, Martins, J, Martins, LD, Albuquerque, T, Zhang, Y and Morawska, L (2016) New directions: From biofuels to wood stoves: The modern and ancient air quality challenges in the megacity of São Paulo Atmospheric Environment, 140. pp. 364-369.
Kumar, P, Fennell, P and Britter, R (2008) Effect of wind direction and speed on the dispersion of nucleation and accumulation mode particles in an urban street canyon Science of The Total Environment, 402 (1). pp. 82-94.
Kumar, P, Fennell, P and Britter, R (2008) Measurements of particles in the 5-1000�nm range close to road level in an urban street canyon Science of The Total Environment, 390 (2-3). pp. 437-447.
Kumar, P, Fennell, P, Hayhurst, A and Britter, R (2009) Street Versus Rooftop Level Concentrations of Fine Particles in a Cambridge Street Canyon Boundary-Layer Meteorology, 131 (1). pp. 3-18.
Kumar, P, Garmory, A, Ketzel, M, Berkowicz, R and Britter, R (2009) Comparative study of measured and modelled number concentrations of nanoparticles in an urban street canyon Atmospheric Environment, 43 (4). pp. 949-958.
Kumar, P, Garmory, A, Ketzel, M, Berkowicz, R and Britter, R (2009) Comparative study of measured and modelled number concentrations of�nanoparticles in an urban street canyon Atmospheric Environment, 43 (4). pp. 949-958.
Kumar, P, Gulia, S, Harrison, RM and Khare, M (2017) The influence of odd–even car trial on fine and coarse particles in Delhi Environmental Pollution.
Kumar, P, Gurjar, BR, Nagpure, AS and Harrison, RM (2011) Preliminary Estimates of Nanoparticle Number Emissions from Road Vehicles in Megacity Delhi and Associated Health Impacts Environmental Science & Technology, 45 (13). pp. 5514-5521.
Kumar, P and Imam, B (2013) Footprints of air pollution and changing environment on the sustainability of built infrastructure Science of The Total Environment, 444. pp. 85-101.
Kumar, P, Jain, S, Gurjar, BR, Sharma, P, Khare, M, Morawska, L and Britter, R (2013) New Directions: Can a “blue sky” return to Indian megacities? Atmospheric Environment, 71. pp. 198-201.
Kumar, P, Ketzel, M, Vardoulakis, S, Pirjola, L and Britter, R (2011) Dynamics and dispersion modelling of nanoparticles from road traffic in the urban atmospheric environment--A review Journal of Aerosol Science, 42 (9). pp. 580-603.
Kumar, P, Khare, M, Harrison, RM, Bloss, WJ, Lewis, A, Coe, H and Morawska, L (2015) New Directions: Air pollution challenges for developing megacities like Delhi Atmospheric Environment.
Kumar, P, Kumar, A, Fernandes, T and Ayoko, GA (2014) Nanomaterials and the Environment Journal of Nanomaterials.
Kumar, P, Kumar, A and Lead, JR (2012) Nanoparticles in Indian Environment: Known, Unknowns and Awareness Environmental Science & Technology, 46 (13). pp. 7071-7072.
Kumar, P and Morawska, L (2013) Energy-Pollution Nexus for Urban Buildings Environmental Science & Technology, 47 (14). pp. 7591-7592.
Kumar, P and Morawska, L (2014) Recycling concrete: An undiscovered source of ultrafine particles Atmospheric Environment, 90. pp. 51-58.
Kumar, P, Morawska, L, Birmili, W, Paasonen, P, Hu, M, Kulmala, M, Harrison, RM, Norford, L and Britter, R (2014) Ultrafine particles in cities Environment International, 66. pp. 1-10.
Kumar, P, Morawska, L, Martani, C, Biskos, G, Neophytou, M, Di Sabatino, S, Bell, M, Norford, L and Britter, R (2015) The rise of low-cost sensing for managing air pollution in cities Environment International, 75. pp. 199-205.
Kumar, P, Mulheron, M, Fisher, B and Harrison, RM (2012) New Directions: Airborne ultrafine particle dust from building activities - A source in need of quantification Atmospheric Environment, 56. pp. 262-264.
Kumar, P, Mulheron, M and Som, C (2012) Release of ultrafine particles from three simulated building processes Journal of Nanoparticle Research, 14.
Kumar, P, Pirjola, L, Ketzel, M and Harrison, RM (2013) Nanoparticle emissions from 11 non-vehicle exhaust sources – A review Atmospheric Environment, 67. pp. 252-277.
Kumar, P, Rafiq, MI and Imam, B (2011) Negotiation on the assessment of research articles with academic reviewers: Application of peer-review approach of teaching Higher Education, 62 (3). pp. 315-332.
Kumar, P, Rivas, I and Sachdeva, L (2017) Exposure of in-pram babies to airborne particles during morning drop-in and afternoon pick-up of school children Environmental Pollution.
Kumar, P, Robins, A and ApSimon, H (2010) Nanoparticle emissions from biofuelled vehicles - their characteristics and impact on the number-based regulation of atmospheric particles Atmospheric Science Letters, 11 (4). pp. 327-331.
Kumar, P, Robins, A and Britter, R (2009) Fast response measurements of the dispersion of nanoparticles in a vehicle wake and a street canyon Atmospheric Environment, 43 (38). pp. 6110-6118.
Kumar, P, Robins, A, Vardoulakis, S and Britter, R (2010) A review of the characteristics of nanoparticles in the urban atmosphere and the prospects for developing regulatory controls Atmospheric Environment, 44 (39). pp. 5035-5052.
Kumar, P, Robins, A, Vardoulakis, S and Quincey, P (2011) Technical challenges in tackling regulatory concerns for urban atmospheric nanoparticles PARTICUOLOGY, 9 (6). pp. 566-571.
Kumar, P, Skouloudis, AN, Bell, M, Viana, M, Carotta, M-C, Biskos, G and Morawska, L (2016) Real-time sensors for indoor air monitoring and challenges ahead in deploying them to urban buildings Science of the Total Environment.
Kumar, P, Wiedensohler, A, Birmili, W, Quincey, P and Hallquist, M (2016) Ultrafine Particles Pollution and Measurements In: Comprehensive Analytical Chemistry. Elsevier.
Kumar, A, , Kumar, P, , Anandan, A, Fernandes, TF, Ayoko, GA and Biskos, J, (2014) Engineered Nanomaterials: Knowledge Gaps in Fate, Exposure, Toxicity, and Future Directions Journal of Nanomaterials, 2014, 130198.
Lajoie, G and Hagen-Zanker, A (2007) La simulation de l'étalement urbain à la Réunion: Apport de l'automate cellulaire Metronamica® pour la prospective territoriale CyberGeo, 2007.
Lawson, RM, Basta, A and Uzzaman, A (2015) Design of stainless steel sections with circular openings in shear Journal of Constructional Steel Research, 112. pp. 228-241.
Li, AJ, Khoo, S, Lyamin, AV and Wang, Y (2016) Rock slope stability analyses using extreme learning neural network and terminal steepest descent algorithm Automation in Construction, 65. pp. 42-50.
Li, Z, He, J, Teng, J and Wang, Y (2016) Internal Stress Monitoring of In-Service Structural Steel Members with Ultrasonic Method Materials, 9 (4), 223.
Li, Z, Peng, Z, Teng, J and Wang, Y (2016) Experimental Study of Damage Evolution in Circular Stirrup-Confined Concrete Materials, 9 (4), 278.
Liu, T, Zou, D, Du, C and Wang, Y (2016) Influence of axial loads on the health monitoring of concrete structures using embedded piezoelectric transducers Structural Health Monitoring: an international journal.
Lombardi, D and Bhattacharya, S (2016) Evaluation of seismic performance of pile-supported models in liquefiable soils Earthquake Engineering and Structural Dynamics, 45 (6). pp. 1019-1038.
Lombardi, D, Dash, SR, Bhattacharya, S, Ibraim, E, Wood, DM and Taylor, CA (2017) Construction of simplified design p-y curves for liquefied soils Geotechnique, 67 (3). pp. 216-227.
Lopez-Aviles, A, Chenoweth, J, Druckman, A and Morse, S (2015) SPREE Country Feasibility Study Report: Water Sector in the UK SPREE.
Lopez-Aviles, A, Chenoweth, J, Druckman, A, Morse, S, Kauffmann, D, Hayoon, L, Pereira, A, Vence, X, Carballo, A, González, M, Turne, A, Feitelson, E and Givoni, M (2015) Servicizing Policy Packages for the Water sector SPREE.
Lopez-Aviles, A and Leach, M (2016) Local Nexus Network for Re-Distributed Manufacturing: Energy Feasibility Study. Final Report [Report]
Lopez-Vazquez, CM, Kubare, M, Saroj, DP, Chikamba, C, Schwarz, J, Daims, H and Brdjanovic, D (2013) Thermophilic biological nitrogen removal in industrial wastewater treatment. Appl Microbiol Biotechnol.
Marti-Cardona, B, Arbat-Bofill, M, Prats-Rodríguez, J and Pipia, L (2016) Thermal remote sensing for reservoir modelling and management In: Living Planet Symposium 2016, 2016-05-09 - 2016-05-13, Prague, Czech Republic.
Marti-Cardona, B, López-Martínez, C and Dolz-Ripollés, J (2014) Local Isotropy Indicator for SAR Image Filtering: Application to Envisat/ASAR Images of the Doñana Wetland (November 2014) IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 8 (4). pp. 1614-1622.
Matos, J, Moreira De Sousa, HF, Assis, W and Figueiras, J (2005) Structure assessment by continuous monitoring – Application to Sorraia River Bridge In: fib Symposium KEEP CONCRETE ATTRACTIVE, 2005-05-23 - ?, Budapest, Hungary.
Miah, JH, Griffiths, A, McNeill, R, Poonaji, I, Martin, R, Morse, S, Yang, A and Sadhukhan, J (2015) A small-scale transdisciplinary process to maximising the energy efficiency of food factories: insights and recommendations from the development of a novel heat integration framework Sustainability Science, 10 (4). pp. 621-637.
Mishra, VK, Kumar, P, Van Poppel, M, Bleux, N, Frijns, E, Reggente, M, Berghmans, P, Int Panis, L and Samson, R (2012) Wintertime spatio-temporal variation of ultrafine particles in a Belgian city Science of The Total Environment, 431. pp. 307-313.
Mitoulis, S (2016) Some open issues in the seismic design of bridges to Eurocode 8-2 Challenge Journal of Structural Mechanics, 2 (1). pp. 7-13.
Mitoulis, S, Palaiochorinou, A, Georgiadis, I and Argyroudis, S (2016) Extending the application of integral frame abutment bridges in earthquake prone areas by using novel isolators of recycled materials Earthquake Engineering and Structural Dynamics, 45 (14). pp. 2283-2301.
Mitoulis, S and Rodriguez Rodriguez, J (2016) Seismic Performance of Novel Resilient Hinges for Columns and Application on Irregular Bridges Journal of Bridge Engineering.
Mitoulis, S, Tubaldi, E, Muhr, A and Ahmadi, H (2016) A parametric study on the axial behaviour of elastomeric isolators in multi-span bridges subjected to horizontal seismic excitations Bulletin of Earthquake Engineering, 14 (4). pp. 1285-1310.
Momoh, YOL, Anyata, BU and Saroj, DP (2013) Development of simplified anaerobic digestion models (SADM's) for studying anaerobic biodegradability and kinetics of complex biomass Biochemical Engineering Journal, 79. pp. 84-93.
Momoh, YOL and Saroj, DP (2016) Development and testing of surface-based and water-based-diffusion kinetic models for studying hydrolysis and biogas production from cow manure Renewable Energy, 86. pp. 1113-1122.
Moreira De Sousa, HF, Bento, J and Figueiras, J (2014) Assessment and management of concrete bridges supported by monitoring data-based Finite Element modelling Journal of Bridge Engineering.
Moreira De Sousa, HF, Bento, J and Figueiras, J (2010) Structural monitoring of Lezíria Bridge since its construction In: IABMAS 2010 – The Fifth International Conference on Bridge Maintenance, Safety, 2010-07-11 - ?, Philadelphia, Pennsylvania, USA.
Moreira De Sousa, HF, Costa, B, Henriques, A and Figueiras, J (2010) MENSUSMONITOR – Algorithm implementation for detecting live load events and assessment of structural effects on bridges In: IABMAS 2010 – The Fifth International Conference on Bridge Maintenance, Safety and Management, 2010-07-11 - ?, Philadelphia, Pennsylvania, USA.
Moreira De Sousa, HF, Felix, C and Figueiras, J (2008) Monitoring system of the new bridge over Tagus River in Portugal – Lezíria bridge In: IBRACON – 50° Congresso Brasileiro do Concreto, 2008-09-04 - ?, Salvador, Bahia, Brazil..
Moreira De Sousa, HF, Matos, J, Felix, C and Figueiras, J (2004) A monitorização estrutural como parte integrante de obras de arte de engenharia civil –Aplicação à ponte sobre o rio Sorraia In: IBRACON – 46° Congresso Brasileiro do Concreto, 2004-08-14 - ?, Florianopolis, Brazil.
Moreira De Sousa, HF, Matos, J and Figueiras, J (2006) Development of an Embedded Sensor Holder for Concrete Structures Monitoring In: The Second Congress fib,, 2006-06-05 - ?, Naples, Italy.
Mouzourides, P, Kumar, P and Neophytou, MKA (2015) Assessment of long-term measurements of particulate matter and gaseous pollutants in South-East Mediterranean Atmospheric Environment, 107. pp. 148-165.
Mukherjee, S, Kumar, P, Hosseini, A, Yang, A and Fennell, P (2014) A comparative assessment of IGCC plants with various CO2 capture technologies producing electricity and hydrogen Energy & Fuels.
Mukherjee, S, Kumar, P, Yang, A and Fennell, P (2015) Energy and exergy analysis of chemical looping combustion technology and comparison with pre-combustion and oxy-fuel combustion technologies for CO2 capture Journal of Environmental Chemical Engineering, 3 (3). pp. 2104-2114.
Nagpure, AK, Gurjar, BR, Sahni, N and Kumar, P (2010) Pollutant emissions from road vehicles in megacity Kolkata, India: past and present trends Indian Journal of Air Pollution Control, 10 (2). pp. 18-30.
Nagpure, AS, Gurjar, BR and Kumar, P (2011) Impact of altitude on emission rates of ozone precursors from gasoline-driven light-duty commercial vehicles Atmospheric Environment, 45 (7). pp. 1413-1417.
Naz, I, Hodgson, D, Smith, A, Marchesi, J, Ahmed, S, Avignone Rossa, C and Saroj, DP (2016) Effect of the Chemical Composition of Filter Media on the Microbial Community in Wastewater Biofilms at Different Temperatures RSC Advances, 6. pp. 104345-104353.
Naz, I, Khatoon, N, Ali, M, Saroj, DP, Batool, S, Ali, N and Ahmed, S (2013) Appraisal of the tire derived rubber (TDR) medium for wastewater treatment under aerobic and anaerobic conditions Journal of Chemical Technology and Biotechnology.
Nikitas, G, Arany, L, Aingaran, S, Vimalan, J and Bhattacharya, S (2016) Predicting long term performance of Offshore Wind Turbines using Cyclic Simple Shear apparatus Soil Dynamics and Earthquake Engineering, 92. pp. 678-683.
Nooshin, H and Disney, P (2000) Formex Configuration Processing I International Journal of Space Structures, 15, 1. pp. 1-52.
Nooshin, H and Disney, P (2001) Formex Configuration Processing II International Journal of Space Structures, 16, 1. pp. 1-56.
Nooshin, H and Disney, P (2002) Formex Configuration Processing III International Journal of Space Structures, 17, 1. pp. 1-50.
Nooshin, H, Samavati, O and Sabzali, A (2016) Basics of Formian-K Formexia. ISBN 978-1-5272-0161-3
Nooshin, H and Samavati, OA (2016) Some Morphological Aspects of Configurations In: IASS 2016 Annual International Symposium, 2016-09-26 - 2016-09-30, Tokyo, Japan.
O'Sullivan, C, Bray, JD and Cui, L (2006) Experimental validation of particle-based discrete element methods GeoCongress 2006: Geotechnical Engineering in the Information Technology Age, 2006. pp. 1-18.
O'Sullivan, C and Cui, L (2009) Fabric Evolution in Granular Materials Subject to Drained, Strain Controlled Cyclic Loading In: 6th International Conference on the Micromechanics of Granular Media, 2009-07-13 - 2009-07-17, Golden, CO.
O'Sullivan, C and Cui, L (2009) Micromechanics of granular material response during load reversals: Combined DEM and experimental study Powder Technology, 193 (3). pp. 289-302.
O'Sullivan, C, Cui, L and Barreto, D Radial periodic boundaries for axi-symmetric DEM simulations: development, implementation and validation In: Particles 2009, 2009-11-25 - 2009-11-27, Barcelona, Spain.
O'Sullivan, C, Cui, L and Bray, JD Three-Dimensional Discrete Element Simulations of Direct Shear Tests In: 2nd International PFC Symposium, 2004-10-28 - 2004-10-29, Kyoto, Japan.
Ogunlowo, OO, Bristow, A and Sohail, M (2017) A stakeholder analysis of the automotive industry's use of compressed natural gas in Nigeria Transport Policy, 53. pp. 58-69.
Ojajuni, OD, Holder, S, Cavalli, G, Lee, J and Saroj, DP (2016) Rejection of Caffeine and Carbamazepine by surface coated PVDF hollow-fiber membrane system Industrial & Engineering Chemistry Research.
Okotto-Okotto, J, Okotto, L, Price, H, Pedley, S and Wright, J (2015) A Longitudinal Study of Long-Term Change in Contamination Hazards and Shallow Well Quality in Two Neighbourhoods of Kisumu, Kenya INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH, 12 (4). pp. 4275-4291.
Olmati, P, Sagaseta, J, Cormie, D and Jones, A (2017) Simplified reliability analysis of punching in reinforced concrete flat slab buildings under accidental actions Engineering Structures, 130. pp. 83-98.
PARKE, G A R and BEHNEJAD, S. ALIREZA (2014) Zygmunt Stanisław Makowski: A pioneer of space structures Architectus, 40 (4). pp. 33-40.
PARKE, Gerard and BEHNEJAD, S. ALIREZA (2013) Z S Makowski: A Pioneer In: The International Association for Shell and Spatial Structures 2013 Symposium, 23-27 September 2013, Wroclaw, Poland. Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw.
Pacheco, MT, Parmigiani, MMM, Andrade, M, Morawska, L and Kumar, P (2017) A review of emissions and concentrations of particulate matter in the three metropolitan areas of Brazil Journal of Transport & Health.
Patra, AK, Gautam, S and Kumar, P (2016) Emissions and human health impact of particulate matter from opencast mining operation - A review Environmental Technology and Innovation.
Pediaditi, K, Wehrmeyer, W, Chenoweth, J, Brebbia, CA, Popov, V and Fayzieva, D (2005) Brownfield redevelopment, integrating sustainability and risk management In: 3rd International Conference on the Impact of Environmental Factors on Health, 2005-09-14 - 2005-09-16, Bologna, ITALY.
Peng, JF, Hu, M, Wang, ZB, Huang, XF, Kumar, P, Wu, ZJ, Guo, S, Yue, DL, Shang, DJ, Zheng, Z and He, LY (2014) Submicron aerosols at thirteen diversified sites in China: size distribution, new particle formation and corresponding contribution to cloud condensation nuclei production ATMOSPHERIC CHEMISTRY AND PHYSICS, 14 (18). pp. 10249-10265.
Perdigao, V, Barros, P, Matos, J, Moreira De Sousa, HF and Figueiras, J (2006) Development and implementation of a long term structural health monitoring In: IABMAS'06 - Third International Conference on Bridge Maintenance, Safety and Management, 2006-07-16 - ?, Porto, Portugal.
Petrus, C, Hamid, HA, Ibrahim, A and Parke, G (2010) Experimental behaviour of concrete filled thin walled steel tubes with tab stiffeners JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 66 (7). pp. 915-922.
Pond, KR (2015) Introduction to exposure pathways In: Routledge Handbook of Water and Health. Routledge, London and New York, pp. 137-143. ISBN 978-1-138-91007-2
Pond, KR and Charles, K (2015) Drinking water quality regulations In: Routledge Handbook of Water and Health. Routledge, London and New York, pp. 447-454. ISBN 978-1-138-91007-2
Reggente, M, Peters, J, Theunis, J, Van Poppel, M, Rademaker, M, De Baets, B and Kumar, P (2015) A comparison of strategies for estimation of ultrafine particle number concentrations in urban air pollution monitoring networks Environmental Pollution, 199. pp. 209-218.
Reggente, M, Peters, J, Theunis, J, Van Poppel, M, Rademaker, M, Kumar, P and De Baets, B (2014) Prediction of ultrafine particle number concentrations in urban environments by means of Gaussian process regression based on measurements of oxides of nitrogen Environmental Modelling & Software, 61. pp. 135-150.
Righiniotis, TD and Imam, B (2006) Effect of fracture on the reliability of a moment resisting frame under earthquake loading In: ICOSSAR '05, 2005-06-19 - 2005-06-23, Rome, Italy.
Righiniotis, TD, Imam, BM and Chryssanthopoulos, MK (2008) Fatigue analysis of riveted railway bridge connections using the theory of critical distances Engineering Structures, 30 (10). pp. 2707-2715.
Rivas, I, Kumar, P and Hagen-Zanker, A (2017) Exposure to air pollutants during commuting in London: are there inequalities among different socio-economic groups? Environment International, 101. pp. 143-157.
Rouf, A, Bouazza, A, Singh, RM, Gates, WP and Rowe, RK (2016) Gas flow unified measurement system for sequential measurement of gas diffusion and gas permeability of partially hydrated geosynthetic clay liners Canadian Geotechnical Journal, 53 (6). pp. 1000-1012.
Rouf, MA, Bouazza, A, Singh, RM, Gates, WP and Rowe, RK (2015) Water vapour adsorption and desorption in GCLs Geosynthetics International, 23 (2). pp. 86-99.
Rouf, MA, Singh, RM, Bouazza, A, Rowe, RK and Gates, WP (2015) Gas permeability of partially hydrated geosynthetic clay liner under two stress conditions Environmental Geotechnics.
Rouholamin, M, Bhattacharya, S and Orense, RP (2017) Effect of initial relative density on the post-liquefaction behaviour of sand Soil Dynamics and Earthquake Engineering.
Ruiz, MF, Muttoni, A and Sagaseta, J (2015) Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects ENGINEERING STRUCTURES, 99. pp. 360-372.
Ryan, SM, Szyniszewski, S, Ha, S, Xiao, R, Nguyen, TD, Sharp, KW, Weihs, TP, Guest, JK and Hemker, KJ (2015) Damping behavior of 3D woven metallic lattice materials SCRIPTA MATERIALIA, 106. pp. 1-4.
Saaj, CM, Gouache, TP, Patel, N, Brunskill, C, Scott, G, Matthews, M and Cui, L (2011) Soil simulant sourcing for the ExoMars rover testbed Journal of Planetary and Space Science, 59 (8). pp. 779-787.
Sadr, S, Onder, T, Saroj, DP and Ouki, S (2013) Appraisal of membrane processes for technology selection in centralized wastewater reuse scenarios Sustainable Environmental Research, 23 (2). pp. 69-78.
Sadr, SMK, Saroj, DP, Kouchaki, S, Ilemobade, A and Ouki, S (2015) A Group Decision-Making Tool for the Application of Membrane Technologies in Different Water Reuse Scenarios Journal of Environmental Management.
Sagaseta, J, Muttoni, A, Ruiz, MF and Tassinari, L (2011) Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement Magazine of Concrete Research, 63 (6). pp. 441-457.
Sagaseta, J, Tassinari, L, Ruiz, MF and Muttoni, A (2014) Punching of flat slabs supported on rectangular columns ENGINEERING STRUCTURES, 77. pp. 17-33.
Sagaseta, J and Ulaeto, N (2017) Numerical and analytical modelling of localized impact load in RC panels and slabs FABIG.
Sagaseta, J, Ulaeto, NW and Russell, J (2016) Structural Robustness of Concrete Flat Slab Structures In: International Symposium on Punching Shear of Structural Concrete Slabs - Honoring Neil Hawkins, 2016-10-23 - 2016-10-27, Philadelphia.
Sagaseta, J and Vollum, R (2008) Strut-and-tie modelling of short span beams In: International FIB Symposium, 2008-05-19 - 2008-05-21, Amsterdam, NETHERLANDS.
Sagaseta, J and Vollum, RL (2011) Influence of aggregate fracture on shear transfer through cracks in reinforced concrete MAGAZINE OF CONCRETE RESEARCH, 63 (2). pp. 119-137.
Sagaseta, J and Vollum, RL (2011) Influence of beam cross-section, loading arrangement and aggregate type on shear strength MAGAZINE OF CONCRETE RESEARCH, 63 (2). pp. 139-155.
Sagaseta, J and Vollum, RL (2010) Shear design of short-span beams MAGAZINE OF CONCRETE RESEARCH, 62 (4). pp. 267-282.
Salthammer, T, Uhde, E, Schripp, T, Schieweck, A, Morawska, L, Mazaheri, M, Clifford, S, He, C, Buonanno, G, Querol, X, Viana, M and Kumar, P (2016) Children's well-being at schools: impact of climatic conditions and air pollution Environment International, 94. pp. 196-210.
Saroj, DP, Inchauste-Daza, A, Lopez-Vazquez, CM and Brdjanovic, D (2011) Ozonation for Sludge Reduction and Improved Biological Nutrient Removal Journal of Residuals Science & Technology, 8 (2). pp. 71-78.
Scott, JL and Lee, J (2016) Appropriate lifetimes, fitting deaths Green Chemistry.
Segalin, B, Kumar, P, Micadei, K, Fornaro, A and Gonçalves, FLT (2016) Size–segregated particulate matter inside residences of elderly in the Metropolitan Area of São Paulo, Brazil Atmospheric Environment.
Sharma, P, Sharma, P, Jain, S and Kumar, P (2013) An integrated statistical approach for evaluating the exceedence of criteria pollutants in the ambient air of megacity Delhi Atmospheric Environment, 70. pp. 7-17.
Sheehan, T, Dai, X, Lam, D, Aggelopoulos, E, Lawson, RM and Obiala, R (2016) Experimental study on long spanning composite cellular beam under flexure and shear Journal of Constructional Steel Research, 116. pp. 40-54.
Shraim, AM, Alenazi, DA, Abdel-Salam, A-SG and Kumar, P (2016) Loading Rates of Dust and Metals in Residential Houses of Arid and Dry Climatic Regions Aerosol and Air Quality Research, 16 (10). pp. 2462-2473.
Singh, RM and Bouazza, A (2013) Thermal conductivity of geosynthetics Geotextiles and Geomembranes, 39. pp. 1-8.
Singh, RM, Bouazza, A and Wang, B (2015) Near-field ground thermal response to heating of a geothermal energy pile: Observations from a field test Soils and Foundations, 55 (6). pp. 1412-1426.
Skouteris, G, Saroj, DP, Melidis, P, Hai, FI and Ouki, S (2015) The Effect of Activated Carbon Addition on Membrane Bioreactor Processes for Wastewater Treatment and Reclamation-A Critical Review Bioresource Technology, 185. pp. 399-410.
Sousa, C, Sousa, H, Neves, AS and Figueiras, J (2012) Numerical evaluation of the long-term behavior of precast continuous bridge decks Journal of Bridge Engineering, 17 (1). pp. 89-96.
Sousa, H, Figueiras, J and Bento, J (2013) Construction assessment and long-term prediction of prestressed concrete bridges based on monitoring data Engineering Structures, 52. pp. 26-37.
Sousa, H, Figueiras, J, Félix, C and Bento, J (2011) Design and implementation of a monitoring system applied to a long-span prestressed concrete bridge Structural Concrete, 12 (2). pp. 82-93.
Sousa, H, Sousa, C, Neves, AS, Figueiras, J and Bento, J (2011) Long-term monitoring and assessment of a precast continuous viaduct Structure and Infrastructure Engineering, 9 (8). pp. 777-793.
Souto-Oliveira, CE, Andrade, M, Kumar, P, da Silva Lopes, FJ, Babinski, M and Landulfo, E (2016) Effect of vehicular traffic, remote sources and new particle formation on the activation properties of cloud condensation nuclei in the megacity of São Paulo, Brazil Atmospheric Chemistry and Physics.
Starling, N, Belmonte, HMS, Shepherd, MA, Mulheron, MJ and Smith, PA (2007) Characterisation of lead pipes used in the water industry: extrusion processing, alloy microstructure and their role in service failures Materials Science and Technology, 23. pp. 600-605.
Szyniszewski, S (2009) Dynamic energy based method for progressive collapse analysis Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role. pp. 1259-1268.
Szyniszewski, S and Krauthammer, T (2012) Energy flow in progressive collapse of steel framed buildings Engineering Structures, 42. pp. 142-153.
Szyniszewski, S, Zeinoddini, VM, Schafer, BW, Smith, BH, Arwade, SR and Hajjar, JF (2012) Towards the design of cold-formed steel foam sandwich columns 21st International Specialty Conference on Cold-Formed Steel Structures - Recent Research and Developments in Cold-Formed Steel Design and Construction. pp. 355-371.
Szyniszewski, ST, Smith, BH, Hajjar, JF, Schafer, BW and Arwade, SR (2014) The mechanical properties and modeling of a sintered hollow sphere steel foam MATERIALS & DESIGN, 54. pp. 1083-1094.
Tiwary, A and Kumar, P (2014) Impact evaluation of green–grey infrastructure interaction on built-space integrity: An emerging perspective to urban ecosystem service Science of The Total Environment, 487. pp. 350-360.
Tsinda, A, Abbott, P, Pedley, S, Charles, K, Adogo, J, Okurut, K and Chenoweth, J (2013) Challenges to Achieving Sustainable Sanitation in Informal Settlements of Kigali, Rwanda International Journal of Environmental Research and Public Health, 10 (12). pp. 6939-6954.
Tyagi, V, Gurjar, BR, Joshi, N and Kumar, P (2012) PM10 and Heavy Metals in Suburban and Rural Atmospheric Environments of Northern India Journal of Hazardous, Toxic, and Radioactive Waste, 16 (2). pp. 175-182.
Usman, UA, Kumar, P, Abdulkadir, AB, Kamale, HI, Sadiq, HM, Muhammed, DD, Ibrahim, Y and Wulo, IB (2016) Geochemical assessment of toxic metals stocking in top-soil within the area of limestone quarry in Gombe of North-eastern Nigeria African Journal of Environmental Science and Technology, 10 (9). pp. 283-291.
Vara-Vela, A, Andrade, MF, Kumar, P, Ynoue, RY and Munoz, AG (2016) Impact of vehicular emissions on the formation of fine particles in the Sao Paulo Metropolitan Area: a numerical study with the WRF-Chem model ATMOSPHERIC CHEMISTRY AND PHYSICS, 16 (2). pp. 777-797.
Voliotis, A, Bezantakos, S, Giamarelou, M, Valenti, M, Kumar, P and Biskos, G (2014) Nanoparticle emissions from traditional pottery manufacturing Environmental Science: Processes & Impacts, 16 (6). pp. 1489-1494.
Wakeling, M, Eyre, J, Hughes, S and Roulstone, I (2015) Assimilation of vertical motion from simulated cloudy satellite imagery in an idealized single column model Quarterly Journal of the Royal Meteorological Society, 141 (689). pp. 1198-1207.
Wang, B, Bouazza, A, Barry-Macaulay, D, Singh, RM, Webster, M, Haberfield, C, Chapman, G and Baycan, S (2012) Field and Laboratory Investigation of a Heat Exchanger Pile In: GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, 2012-03-25 - 2012-03-29, Oakland, USA.
Wang, B, Bouazza, A, Singh, RM, Haberfield, C, Barry-Macaulay, D and Baycan, S (2014) Posttemperature Effects on Shaft Capacity of a Full-Scale Geothermal Energy Pile Journal of Geotechnical and Geoenvironmental Engineering, 141 (4), 04014125.
Wang, H, Ogin, SL, Thorne, AM and Reed, GT (2006) Interaction between optical fibre sensors and matrix cracks in cross-ply GFRP laminates. Part 2: Crack detection COMPOSITES SCIENCE AND TECHNOLOGY, 66 (13). pp. 2367-2378.
Wang, Y and Hao, H (2013) Damage Identification of Slab-girder Structures: Experimental Studies Journal of Civil Structural Health Monitoring.
Wang, Y and Hao, H (2014) “Modelling of guided wave propagation with spectral element: application in structural engineering Applied Mechanics and Materials.
Wang, Y, Hao, Y, Hao, H and Huang, X (2016) An efficient method to derive statistical mechanical properties of concrete reinforced with spiral-shaped steel fibres in dynamic tension Construction and Building Materials, 124. pp. 732-745.
Wang, Y, Vidakovic, M, Scott, R, Wu, Q, Sun, T and Grattan, KTV (2016) Optical fibre sensor with 3D printed package configuration: a potential revolution of structural strain testing In: 24th Australasian Conference on the Mechanics of Structures and Materials, 2016-12-06 - 2016-12-09, Perth, Western Australia.
Wei, A, Wang, Y and Tan, Y (2015) Monitoring Corrosion of Reinforced Concrete Beams in a Chloride Containing Environment under Different Loading Levels Structural Monitoring and Maintenance, 2 (3). pp. 253-267.
Wrzesien, AM, Lim, JBP, Xu, Y, MacLeod, IA and Lawson, RM (2015) Effect of stressed skin action on the behaviour of cold-formed steel portal frames Engineering Structures. pp. 123-136.
Yu, KL, Singh, RM, Bouazza, A and Bui, HH (2015) Determining Soil Thermal Conductivity Through Numerical Simulation of a Heating Test on a Heat Exchanger Pile Geotechnical and Geological Engineering, 33 (2). pp. 239-252.
Zeinoddini, M, Ezzati, M and Parke, GAR (2015) Plastic buckling, wrinkling and collapse behaviour of dented X80 steel line pipes under axial compression Journal of Loss Prevention in the Process Industries, 38. pp. 67-78.
Zeinoddini, M and Parke, GAR (2011) Elastic Shakedown and Adaptation of the Response in Laterally Impacted Steel Tubes INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 20 (3). pp. 400-422.
Zheng, J, Hu, M, Peng, J, Wu, Z, Kumar, P, Li, M, Wang, Y and Guo, S (2016) Spatial distributions and chemical properties of PM2.5 based on 21 field campaigns at 17 sites in China Chemosphere, 159 (Sept). pp. 480-487.
de Moel, M, Bach, PM, Bouazza, A, Singh, RM and JingLiang, OS (2010) Technological advances and applications of geothermal energy pile foundations and their feasibility in Australia Renewable and Sustainable Energy Reviews, 14 (9). pp. 2683-2696.