University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Academic/Research unit is "Faculty of Engineering and Physical Sciences > Chemical and Process Engineering"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | I | K | L | M | O | P | R | S | T | U | W | X | Y | Z
Number of items: 67.

A

Abbassi Monjezi, A and Campbell, AN (2016) A comprehensive transient model for the prediction of the temperature distribution in a solar pond under Mediterranean conditions Solar Energy, 135. pp. 297-307.

Aliff Radzuan, MR, Abia-Biteo Belope, MA and Thorpe, Rex (2016) Removal of Fine Oil Droplets from Oil-in-Water Mixtures by Dissolved Air Flotation Chemical Engineering Research and Design, 115 (A). pp. 19-33.

Amini Horri, B, Amouzgar, P, Wong, MY and Salamatinia, B (2016) Advanced Material for Pharmaceutical Removal from Wastewater In: Smart Materials for Waste Water Applications. John Wiley & Sons, pp. 179-212. ISBN 1119041198

Amini Horri, B, Choo, CK, Goh, TL, Shahcheraghi, L, Ngoh, GC, Abdullah, AZ and Salamatinia, B (2016) Synthesis and Characterization of NiO Nano-Spheres by Templating on Chitosan as a Green Precursor Journal of the American Ceramic Society, 99 (12). pp. 3874-3882.

Amini Horri, B, Choo, CK and Salamatinia, B (2016) Synthesis and Characterization of Nickel (II) Oxide/Gadolinium-Doped Ceria (NiO/GDC) Nanocomposites As a Potential Material for Anode Supported LT-SOFCs In: WCECS 2016, 2016-10-19 - 2016-10-21, San Francisco, USA.

Amini Horri, B, Lim, HH, Sulistya, E, Salamatinia, B and Wong, MY (2016) Ceramic Nanocomposites for Solid Oxide Fuel Cells In: Sol-gel Based Nanoceramic Materials: Preparation, Properties and Applications. Springer, pp. 157-183. ISBN 3319495127

Amini Horri, B, Tan, KB, Abdullah, AZ and Salamatinia, B (2016) Adsorption Mechanism of Microcrystalline Cellulose as Green Adsorbent for the Removal of Cationic Methylene Blue Dye JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, 38 (4). pp. 651-664.

Ansart, R, Garcia Trinanes, Pablo, Boissière, B, Benoit, H, Seville, Jonathan and Simonin, O (2016) Dense gas-particle suspension upward flow used as heat transfer fluid in solar receiver: PEPT experiments and 3D numerical simulations Powder Technology, 307. pp. 25-36.

B

Baqir, AS, Mahood, HB, Campbell, Alasdair and Griffiths, AJ (2016) Measuring the Average Volumetric Heat Transfer Coefficient of a Liquid-Liquid-Vapour Direct Contact Heat Exchanger Applied Thermal Engineering, 103. pp. 47-55.

Baqir, AS, Mahood, HB, Hameed, MS and Campbell, Alasdair (2016) Heat Transfer Measurement in a Three-Phase Spray Column Direct Contact Heat Exchanger for Utilisation in Energy Recovery from Low-Grade Sources Energy Conversion and Management, 126. pp. 342-351.

Bhangu, SK, Ashokkumar, M and Lee, J (2016) Ultrasound Assisted Crystallization of Paracetamol: Crystal Size Distribution and Polymorph Control Crystal Growth and Design, 16. pp. 1934-1941.

Boldrin, P, Ruiz-Trejo, E, Mermelstein, J, Bermudez Menendez, J, Ramirez Reina, T and Brandon, NP (2016) Strategies for carbon and sulfur tolerant solid oxide fuel cell materials, incorporating lessons from heterogeneous catalysis Chemical Reviews.

Bussemaker, Madeleine, Trokanas, Nikolaos and Cecelja, Franjo (2016) An Ontological Approach to Chemical Engineering Curriculum Development 26th European Symposium on Computer Aided Process Engineering, 38 (A & B). pp. 2331-2336.

Bussemaker, Madeleine, Trokanas, Nikolaos and Cecelja, Franjo (2016) An Ontological Approach to Chemical Engineering Curriculum Development In: 26th European Symposium on Computer Aided Process Engineering - ESCAPE26, 2016-06-12 - 2016-06-15, Portoroz, Sloveni.

C

Centeno, MA, Ramirez Reina, T, Ivanova, S, Laguna, OH and Odriozola, JA (2016) Au/CeO2 Catalysts: Structure and CO Oxidation Activity Catalysts, 6 (10), 158.

Chan, MSC, del Rio-Chanona, EA, Fiorelli, F, Arellano-Garcia, H and Vassiliadis, VS (2016) Construction of global optimization constrained NLP test cases from unconstrained problems Chemical Engineering Research and Design, 109 (May 20). pp. 753-769.

Chen, LLT, Chen, T and Chen, J (2016) PID Based Nonlinear Processes Control Model Uncertainty Improvement by Using Gaussian Process Model Journal of Process Control, 42. pp. 77-89.

Chen, T, Lian, G and Kattou, P (2016) In Silico Modelling of Transdermal and Systemic Kinetics of Topically Applied Solutes: Model Development and Initial Validation for Transdermal Nicotine Pharmaceutical Research.

D

Duyar, Melis S., Wang, S., Arellano-Treviño, M.A. and Farrauto, R.J. (2016) CO₂ utilization with a novel dual function material (DFM) for capture and catalytic conversion to synthetic natural gas: An update Journal of CO2 Utilization, 15. pp. 65-71.

E

England, Matthew, Bigelow, AW, Merchant, MJ, Velliou, Eirini, Welch, D, Brenner, DJ and Kirkby, Karen (2016) Automated Microbeam Observation Environment for Biological Analysis − Custom Portable Environmental Control applied to a Vertical Microbeam System Sensors and Actuators B: Chemical, 239. pp. 1134-1143.

G

Gadkari, S, Fidalgo, B and Gu, S (2016) Numerical investigation of microwave-assisted pyrolysis of lignin Fuel Processing Technology, 156. pp. 473-484.

Gadkari, Siddharth, Fidalgo, B and Gu, Sai (2016) Numerical analysis of microwave assisted thermocatalytic decomposition of methane International Journal of Hydrogen Energy, 42 (7). pp. 4061-4068.

Gonzalez-Castano, M, Ramirez Reina, T, Ivanova, S, Martinez-Tejada, M, Centeno, MA and Odriozola, JA (2016) O2-assisted Water Gas Shift reaction using Au and Pt structured catalysts Applied Catalysis B: Environmental, 185. pp. 337-343.

H

Hallez, L, Lee, J, Touyeras, F, Nevers, A, Ashokkumar, M and Hihn, JY (2016) Enhancement and quenching of high-intensity focused ultrasound cavitation activity via short frequency sweep gaps Ultrasonics Sonochemistry, 29. pp. 194-197.

Hare, Colin, Ghadiri, M, Guillard, N, Bosworth, T and Egan, G (2016) Analysis of milling of dry compacted ribbons by distinct element method Chemical Engineering Science, 149. pp. 204-214.

I

Imole, OI, Krijgsman, D, Weinhart, T, Magnanimo, V, Montes, BEC, Ramaioli, M and Luding, S (2016) Experiments and discrete element simulation of the dosing of cohesive powders in a simplified geometry Powder Technology, 287. pp. 108-120.

K

Kajero, Olumayowa, Thorpe, Rex and Chen, Tao (2016) Kriging meta-model assisted calibration of computational fluid dynamics models AIChE Journal, 62 (12). pp. 4308-4320.

Karatrantos, Argyrios and Cai, Qiong (2016) Design of Nanoporous Carbons as Anode Materials for Sodium (Na) Ion Batteries ECS Transactions, 72 (36). pp. 11-14.

Karatrantos, Argyrios and Cai, Qiong (2016) Effect of pore size and surface charge on Na ion storage in carbon nanopores Physical Chemistry Chemical Physics.

Kezia, K, Lee, J, Zisu, B, Weeks, M, Chen, G, Gras, S and Kentish, S (2016) Crystallisation of minerals from concentrated saline dairy effluent Water Research, 101. pp. 300-308.

Koo, L, Trokanas, N, Tokos, H and Cecelja, Franjo (2016) A Holistic Approach to Model Discovery Using A Domain Ontology Computer-Aided Chemical Engineering, 38. pp. 733-738.

Krok, A, Mirtic, A, Reynolds, GK, Schiano, S, Roberts, R and Wu, C (2016) An experimental investigation of temperature rise during compaction of pharmaceutical powders International Journal of Pharmaceutics.

L

Labrador-Darder, C, Kokossis, Antonis and Cecelja, Franjo (2016) Semantically Enabled Process Synthesis and Optimisation Computers and Chemical Engineering, 93. pp. 64-86.

Lee, JY (2016) Importance of Sonication and Solution Conditions on the Acoustic Cavitation Activity In: Handbook of Ultrasonics and Sonochemistry. Springer, pp. 137-175. ISBN 978-981-287-277-7

Li, B, Nguyen, VH, Ng, CL, del Rio-Chanona, EA, Vassiliadis, VS and Arellano-Garcia, H (2016) ICRS-Filter: A randomized direct search algorithm for constrained nonconvex optimization problems Chemical Engineering Research and Design, 106. pp. 178-190.

Liu, LX and Powell, M (2016) New approach on confined particle bed breakage as applied to multicomponent ore Minerals Engineering. pp. 80-91.

Liu, Q, Huang, D, Lu, T, Seville, Jonathan, Xing, L and Leeke, GA (2016) Supercritical fluid coating of API on excipient enhances drug release Chemical Engineering Journal, 313. pp. 317-327.

M

Mahood, HB, Campbell, AN, Sharif, AO and Thorpe, Rex (2016) Heat Transfer Measurement in a Three-Phase Direct-Contact Condenser under Flooding Conditions Applied Thermal Engineering.

Mahrukh, M, Kumar, A and Gu, S (2016) Effects of Angular Injection, and Effervescent Atomization on High-Velocity Suspension Flame Spray Process Surface and Coatings Technology, 302. pp. 368-382.

Mahrukh, M, Kumar, A, Gu, S and Kamnis, S (2016) Computational Development of a Novel Aerosol Synthesis Technique for Production of Dense and Nanostructured Zirconia Coating Industrial and Engineering Chemistry Research, 55 (28). pp. 7679-7695.

Mahrukh, M, Kumar, A, Gu, S, Kamnis, S and Gozali, E (2016) Modeling the Effects of Concentration of Solid Nanoparticles in Liquid Feedstock Injection on High-Velocity Suspension Flame Spray Process Industrial and Engineering Chemistry Research, 55 (9). pp. 2556-2573.

UNSPECIFIED (2016) CATALYST FOR PROCESSING HEAVY OILS AND ITS PREPARATION METHOD PCT/RU2015/000546.

Mowlavi, S, Engmann, J, Burbidge, A, Lloyd, R, Hayoun, P, Le Reverend, B and Ramaioli, M (2016) In vivo observations and in vitro experiments on the oral phase of swallowing of Newtonian and shear-thinning liquids Journal of Biomechanics.

O

Ojha, VK, Schiano, Serena, Wu, Chuan-Yu, Snasel, V and Abraham, A (2016) Predictive Modelling of Die Filling of the Pharmaceutical Granules Using the Flexible Neural Tree Neural Computing and Applications, 29 (7). pp. 467-481.

P

Pei, C, Wu, C and Adams, M (2016) DEM-CFD analysis of contact electrification and electrostatic interactions during fluidization Powder Technology.

R

Ramirez Reina, T, Ivanova, S, Centeno, MA and Odriozola, MA (2016) The role of Au, Cu & CeO2 and their interactions for an enhanced WGS performance Applied Catalysis B: Environmental, 187. pp. 98-107.

Ramirez Reina, T, Ivanova, S, Idakiev, V, Tabakova, T, Centeno, MA, Deng, Q, Yuan, Z and Odriozola, JA (2016) Nanogold mesoporous iron promoted ceria catalysts for total and preferential CO oxidation reactions Journal of Molecular Catalysis A: Chemical, 414. pp. 62-71.

Ramirez Reina, T, Ivanova, S, Laguna, OH, Centeno, MA and Odriozola, JA (2016) WGS and CO-PrOx reactions using gold promoted copper-ceria catalysts: “Bulk CuO CeO2 vs. CuO CeO2/Al2O3 with low mixed oxide content” Applied Catalysis B: Environmental, 1697. pp. 62-7.

Universidad de Sevilla (2016) Gold Catalysts supported in CuO/ZnO/Al2O3, production method and use of thereof PCT/ES2015/000138 - WO2016/059268 A1.

Ramirez Reina, T, Santos, JL, García-Moncada, N, Ivanova, S and Odriozola, JA (2016) Development of Robust Mixed-Conducting Membranes with High Permeability and Stability In: Perovskites and Related Mixed Oxides: Concepts and Applications. Wiley, pp. 719-738. ISBN 978-3-527-33763-7

Ramirez Reina, T, Yeletsky, P, Bermudez, JM, Arcelus-Arrillaga, P, Yakovlev, V and Millan, M (2016) Anthracene aquacracking using NiMo/SiO2 catalysts in supercritical water conditions Fuel: the science and technology of fuel and energy, 182. pp. 740-748.

Ranganathan, P and Gu, S (2016) Computational fluid dynamics modelling of biomass fast pyrolysis in fluidised bed reactors, focusing different kinetic schemes. Bioresour Technol, 213. pp. 331-341.

S

Sayer, A, Al-Hussaini, HA and Campbell, AN (2016) New Theoretical Modelling of Heat Transfer in Solar Ponds Solar Energy, 125. pp. 207-218.

Schiano, S, Wu, CY, Mirtic, A and Reynolds, G (2016) A Novel Use of Friability Testing for Characterising Ribbon Milling Behaviour. Eur J Pharm Biopharm, 104. pp. 82-88.

Shemfe, Mobolaji, Whittaker, C, Gu, Sai and Fidalgo, B (2016) Comparative evaluation of GHG emissions from the use of Miscanthus for bio-hydrocarbon production via fast pyrolysis and bio-oil upgrading Applied Energy, 176. pp. 22-33.

T

Tirole, L, Lee, JY and Bussemaker, MJ (2016) The ultrasonic effect on lignin degradation in oxidative and non-oxidative environments In: WasteEng, 2016-05-23 - 2016-05-26, Albi, Fance.

Trokanas, Nikolaos, Bussemaker, Madeleine and Cecelja, Franjo (2016) Utilising Semantics for Improved Decision Making in Bio-refinery Value Chains Computer-Aided Chemical Engineering, 38. pp. 2097-2102.

U

Ugochukwu, N, Bussemaker, M J and Lee, J Y (2016) Understanding and optimising sonication conditions for crystallisation processes In: 22nd International Congress on Acoustics, 5 - 9 September, 2016, Buenos Aires, Argentina.

W

Wallau, W, Arellano-Garcia, H and Schlawitschek, C (2016) Electric Field Driven Separation of Oil–Water Mixtures: Model Development and Experimental Verification Industrial and Engineering Chemistry Research, 55 (16). pp. 4585-4598.

Wang, JG, Shen, T, Zhao, JH, Ma, SW, Wang, XF, Yao, Y and Chen, T (2016) Soft-Sensing Method for Optimizing Combustion Efficiency of Reheating Furnaces Journal of the Taiwan Institute of Chemical Engineers.

Wu, Anthony, Lovett, D, McEwan, M, Cecelja, Franjo and Chen, Tao (2016) A spreadsheet calculator for estimating biogas production and economic measures for UK-based farm-fed anaerobic digesters Bioresource Technology, 220 (Nov). pp. 479-489.

Wu, C (2016) THE APPLICATION OF TERAHERTZ PULSED IMAGING IN CHARACTERISING DENSITY DISTRIBUTION OF ROLL-COMPACTED RIBBONS European Journal of Pharmaceutics and Biopharmaceutics.

Wu, C, Krok, A, García-Triñanes, P and Peciar,, M (2016) Finite element analysis of thermomechanical behaviour of powders during tabletting. Chemical Engineering Research and Design, 110. pp. 141-151.

X

Xing, L, Cai, Q, Liu, X, Liu, C, Scott, K and Yan, Y (2016) Anode partial flooding modelling of proton exchange membrane fuel cells: Optimisation of electrode properties and channel geometries Chemical Engineering Science, 146. p. 88.

Xing, L, Cai, Q and Scott, K (2016) Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: An anode partial flooding modelling Energy, 106. pp. 631-645.

Y

Yu, P, Xie, W, Liu, Lian, Weerasekara, N, Bonfils, B and Powell, M (2016) A generic dynamic model incorporating a 4D appearance function for tumbling mills In: IMPC 2016, 2016-09-11 - 2016-09-15, Quebec, Canada.

Z

Zhang, W, Zhao, Y, Malgras, V, Ji, Q, Jiang, D, Qi, R, Ariga, K, Yamauchi, Y, Liu, Jia, Jiang, J-S and Hu, M (2016) Synthesis of Monocrystalline Nanoframes of Prussian Blue Analogues by Controlled Preferential Etching Angewandte Chemie International Edition, 55 (29). pp. 8228-8234.

This list was generated on Mon Mar 30 15:37:51 2020 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800