University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Academic/Research unit is "Faculty of Engineering and Physical Sciences > Chemical and Process Engineering"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: B | C | G | I | L | R | S | T | W | X | Y | Z
Number of items: 27.

B

Bussemaker, MJ, Maisey, S, and Wild, D, (2011) Using worksheets and the Internet to improve student learning outcomes In: Teaching and Learning Forum, 2011-02-01 - 2011-02-02, Perth, Australia.

C

Cai, Q, Brandon, NP and Adjiman, CS (2011) Investigation of the active thickness of solid oxide fuel cell electrodes using a 3D microstructure model Electrochimica Acta, 56 (28). pp. 10809-10811.

Cai, Q, Brandon, NP and Adjiman, CS (2011) Modelling the 3D microstructure and performance of solid oxide fuel cell electrodes: Computational parameters Electrochimica Acta, 56 (16). pp. 5804-5814.

Chen, T, Hadinoto, K, Yan, W and Ma, Y (2011) Efficient meta-modelling of complex process simulations with time-space-dependent outputs Computers and Chemical Engineering, 35 (3). pp. 502-509.

Chen, T and Yang, Y (2011) Interpretation of non-linear empirical data-based process models using global sensitivity analysis Chemometrics and Intelligent Laboratory Systems, 107 (1). pp. 116-123.

G

Garcia Trinanes, P, Pereiro, G and Bao, M (2011) Optimization of the alkaline activation process of difficult-to-treat inorganic wastes In: 13th International Conference on the Chemistry of Cement, 2011-07-03 - 2011-07-08, Madrid (Spain).

Ge, Z, Chen, T and Song, Z (2011) Quality prediction for polypropylene production process based on CLGPR model Control Engineering Practice, 19 (5). pp. 423-432.

I

Ivleva, TP, Merzhanov, AG, Rumanov, EN, Vaganova, NI, Campbell, AN and Hayhurst, AN (2011) When do chemical reactions promote mixing? Chemical Engineering Journal, 168 (1). pp. 1-14.

Izadi, N, Rashidi, A, Amini Horri, B, Mosoudi, MR, Bozorgzadeh, HR and Zeraatkar, A (2011) Growth of single-walled carbon nanotubes on a Co–Mo–MgO supported catalyst by the CVD of methane in a fixed bed reactor: Model setting and parameter estimation Solid State Sciences, 13 (6). pp. 1242-1250.

L

Lee, J, Ashokkumar, M, Yasui, K, Tuziuti, T, Kozuka, T, Towata, A and Iida, Y (2011) Development and optimization of acoustic bubble structures at high frequencies Ultrasonics Sonochemistry, 18 (1). pp. 92-98.

Lee, J, Widjaya, A, Hill, A and Kentish, S (2011) Determination of Water Vapor Sorption and Some Transport Parameters for the Aromatic Polyamide Layer of RO Membranes (Unpublished)

Lee, J, zisu, B, Chandrapala, J, Bhaskaracharya, R, Palmer, M, Kentish, S and Ashokkumar, M (2011) Effect of ultrasound on the physical and functional properties of reconstituted whey protein powders Journal of Dairy Research, 78 (2). pp. 226-232.

R

Rhazaoui, Rhazaoui, Cai, Qiong, Shearing, Paul, Adjiman, Claire and Brandon, NP (2011) Solid Oxide Fuel Cell Electrode 3D Microstructure and Performance Modeling ECS Transactions, 35 (1). pp. 1097-1105.

S

Shearing, PR, Cai, Q, Clague, R, Brandon, NP, Adjiman, C, Marquis, AJ, Gelb, J, Bradley, R and Withers, PJ (2011) Microstructural characterisation of SOFC electrodes: Observations and simulations ECS Transactions, 35 (2 PART). pp. 1367-1377.

Si, R, Wang, K, Chen, T and Chen, Y (2011) Chemometric determination of the length distribution of single walled carbon nanotubes through optical spectroscopy. Anal Chim Acta, 708 (1-2). pp. 28-36.

T

Thorpe, Rex, Mills, N, Pearce, P and kirkby, N (2011) The influence of heat balance on the economics of advanced anaerobic digestion proceses In: 16th European Biosolids and Organic Resources Conference, 2011-11-14 - 2011-11-16, Leeds, England.

Towata, A, Lee, J, Yasui, K, Tuziuti, T, Kozuka, T and Iida, Y (2011) Fabrication of silver nanoparticles deposited on boehmite sol for surface enhanced Raman scattering Applied Surface Science, 257 (14). pp. 6010-6015.

Tsakalova, M, Lin, T-C, Yang, A and Kokossis, AC (2011) Implementation and initial evaluation of a decision support platform for selecting production routes of biomass-derived chemicals Computer Aided Chemical Engineering, 29. pp. 1470-1474.

W

Wang, K, Chen, T and Lau, R (2011) Bagging for robust non-linear multivariate calibration of spectroscopy Chemometrics and Intelligent Laboratory Systems, 105 (1). pp. 1-6.

Wang, K, Chi, G, Lau, R and Chen, T (2011) MULTIVARIATE CALIBRATION OF NEAR INFRARED SPECTROSCOPY IN THE PRESENCE OF LIGHT SCATTERING EFFECT: A COMPARATIVE STUDY ANALYTICAL LETTERS, 44 (5). pp. 824-836.

X

Xu, M, Chen, T and Yang, X (2011) Optimal replacement policy for safety-related multi-component multi-state systems Reliability Engineering and System Safety, 99 (1). pp. 87-95.

Xu, M, Chen, T and Yang, X (2011) The effect of parameter uncertainty on achieved safety integrity of safety system Reliability Engineering and System Safety, 99 (1). pp. 15-23.

Y

Yan, W, Chen, Y, Yang, Y and Chen, T (2011) Development of high performance catalysts for CO oxidation using data-based modeling Catalysis Today, 174 (1). pp. 127-134.

Yan, W, Hu, S, Yang, Y, Gao, F and Chen, T (2011) Bayesian migration of Gaussian process regression for rapid process modeling and optimization Chemical Engineering Journal, 166 (3). pp. 1095-1103.

Yang, A (2011) Modeling and Evaluation of CO2 Supply and Utilization in Algal Ponds Industrial and Engineering Chemistry Research, 50 (19). pp. 11181-11192.

Yang, A, Martin, E and Morris, J (2011) Identification of semi-parametric hybrid process models Computers and Chemical Engineering, 35 (1). pp. 63-70.

Z

Zeng, Y, Wang, K, Amini Horri, B, Yao, J, Wu, Y, Li, D and Want, HT (2011) Solar evaporation enhancement using floating light-absorbing magnetic particles Energy & Environmental Science, 4 (10). pp. 4074-4078.

This list was generated on Sat Jul 4 22:29:21 2020 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800