University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Author is "Yeomans, J"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 34.

Article

Yates, P, Mallinson, Christopher, Mallinson, P, Whiting, Mark and Yeomans, Julie (2017) An Investigation into the Nature of the Oxide Layer Formed on Kovar (Fe-29Ni-17Co) Wires Following Oxidation in Air at 700 °C and 800 °C Oxidation of Metals: an international journal of the science of gas-solid reactions, 88 (5-6). pp. 733-747.

Harris, AJ, Vaughan, B, Yeomans, Julie, Smith, Paul and Burnage, ST (2017) Ballistic testing of surface treated alumina and silicon carbide with improved adhesive bond strength International Journal of Applied Ceramic Technology: ceramic product development and commercialization, 14 (3). pp. 323-330.

Parker, Simon, Whiting, Mark and Yeomans, Julie (2017) Control of carbon content in WC-Co hardmetal by heat treatment in reducing atmospheres containing methane. International Journal of Refractory Metals and Hard Materials, 66. pp. 204-210.

Healey, Adam, Cotton, J, Maclachlan, S, Smith, Paul and Yeomans, Julie (2016) Understanding the Ballistic Event: Methodology and Initial Observations Journal of Materials Science, 52 (6). pp. 3074-3085.

Whiting, MJ, Staff, MT, Fernie, JA, Mallinson, PM and Yeomans, JA (2016) Fabrication of a Glass-Ceramic-to-Metal Seal between Ti-6Al-4V and a Strontium Boroaluminate Glass International Journal of Applied Ceramic Technology: ceramic product development and commercialization, 13 (5). pp. 956-965.

Yeomans, JA, Smith, P, Williams, T, Heaton, A and Hampson, C (2015) Effect of interfacial area on densification and microstructural evolution in silicon carbide-boron carbide particulate composites Journal of Materials Science.

Mahdi, D, Riches, A, Gester, M, Yeomans, J and Smith, P (2015) Rolling and sliding: Separation of adhesion and deformation friction and their relative contribution to total friction TRIBOLOGY INTERNATIONAL, 89. pp. 128-134.

Hallam, D, Heaton, A, James, B, Smith, PA and Yeomans, JA (2015) The correlation of indentation behaviour with ballistic performance for spark plasma sintered armour ceramics Journal of the European Ceramics Society. pp. 2243-2252.

Tillman, M, Yeomans, JA and Dorey, RA (2014) The effect of a constraint on the sintering and stress development in alumina thick films Ceramics International, 4 (7). pp. 9715-9721.

Harris, AJ, Vaughan, B, Burnage, ST, Yeomans, JA and Smith, PA (2013) Surface preparation of silicon carbide for improved adhesive bond strength in armour applications Journal of the European Ceramic Society, 33 (15-16). pp. 2925-2934.

Harris, AJ, Vaughan, B, Burnage, ST, Yeomans, JA and Smith, PA (2013) Surface preparation of alumina for improved adhesive bond strength in armor applications Ceramic Engineering and Science Proceedings, 33 (5). pp. 149-159.

Kastritseas, C, Smith, PA and Yeomans, JA (2010) Thermal shock fracture in cross-ply fibre-reinforced ceramic-matrix composites PHILOSOPHICAL MAGAZINE, 90 (31-32), PII 923938. pp. 4209-4226.

Wright, GJ and Yeomans, JA (2009) Three-step sintering of constrained yttria stabilised zirconia layers and its effect on microstructure and gas permeance JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 29 (10). pp. 1933-1938.

Kastritseas, C, Smith, PA and Yeomans, JA (2008) Thermal shock behaviour of angle-ply and woven dense ceramic-matrix composites JOURNAL OF MATERIALS SCIENCE, 43 (12). pp. 4112-4118.

Wright, GJ and Yeomans, JA (2008) Constrained Sintering of Yttria-Stabilized Zirconia Electrolytes: The Influence of Two-Step Sintering Profiles on Microstructure and Gas Permeance INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 5 (6). pp. 589-596.

Yeomans, JA (2008) Ductile particle ceramic matrix composites - Scientific curiosities or engineering materials? JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 28 (7). pp. 1543-1550.

Wright, GJ and Yeomans, JA (2008) The influence of screen-printing parameters on the microstructure and gas permeance of a zirconia electrolyte JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 28 (4). pp. 779-785.

Millar, L, Taherparvar, H, Filkin, N, Slater, P and Yeomans, J (2008) Interaction of (La1�-�xSrx)1�-�yMnO3-Zr1�-�zYzO2�-�d cathodes and LaNi0.6Fe0.4O3 current collecting layers for solid oxide fuel cell application Solid State Ionics, 179, 19-20. 732 - 739 - 732 - 739.

Delaforce, PM, Yeomans, JA, Filkin, NC, Wright, GJ and Thomson, RC (2007) Effect of NiO on the phase stability and microstructure of yttria-stabilized zirconia JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 90 (3). pp. 918-924.

Kiani, S, Pan, J, Yeomans, JA, Barriere, M and Blanchart, P (2007) Finite element analysis of sintering deformation using densification data instead of a constitutive law JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 27 (6). pp. 2377-2383.

Kiani, S, Pan, J and Yeomans, JA (2006) A new scheme of finding the master sintering curve J AM CERAM SOC, 89 (11). pp. 3393-3396.

Kastritseas, C, Smith, PA and Yeomans, JA (2006) Damage characterisation of thermally shocked cross-ply ceramic composite laminates JOURNAL OF MATERIALS SCIENCE, 41 (3). pp. 951-962.

Kastritseas, C, Smith, P and Yeomans, J (2006) Thermal shock of ceramic matrix composites pp. 400-433.

Kastritseas, C, Smith, PA and Yeomans, JA (2005) Thermal shock fracture in unidirectional fibre-reinforced ceramic-matrix composites COMPOSITES SCIENCE AND TECHNOLOGY, 65 (11-12). pp. 1880-1890.

Dorey, RA, Yeomans, JA and Smith, PA (2002) Effect of pore clustering on the mechanical properties of ceramics JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 22 (4). pp. 403-409.

Dorey, RA, Yeomans, JA, Smith, PA and Pan, J (2001) In situ optical dilatometric measurements of the initial stages of sintering of alumina ACTA MATERIALIA, 49 (3). pp. 519-527.

Riches, AM, Yeomans, JA and Smith, PA (1999) Water-lubricated and dry sliding wear of yttria stabilised zirconia and silicon carbide couples Part I: Wear rates WEAR, 236 (1-2). pp. 285-294.

Blissett, MJ, Smith, PA and Yeomans, JA (1998) Flexural mechanical properties of thermally treated unidirectional and cross-ply Nicalon-reinforced calcium aluminosilicate composites JOURNAL OF MATERIALS SCIENCE, 33 (16). pp. 4181-4190.

Blissett, MJ, Smith, PA and Yeomans, JA (1997) Thermal shock behaviour of unidirectional silicon carbide fibre reinforced calcium aluminosilicate JOURNAL OF MATERIALS SCIENCE, 32 (2). pp. 317-325.

Powell, KL, Yeomans, JA and Smith, PA (1997) A study of the erosive wear behaviour of continuous fibre reinforced ceramic matrix composites ACTA MATERIALIA, 45 (1). pp. 321-330.

Powell, KL, Yeomans, JA and Smith, PA (1993) Localised damage in continuous fibre reinforced ceramic matrix composites Ceramic Engineering and Science Proceedings, 14 (9 -10 ). pp. 890-895.

Conference or Workshop Item

Kastritseas, C, Smith, PA and Yeomans, JA (2005) The onset of thermal shock damage in unidirectional-fibre-reinforced ceramic matrix composites In: Conference on Models - Third Dimension of Science, 2003-09-16 - ?, Munich, GERMANY.

Ham, AL, Yeomans, JA and Watts, JF (1999) Effect of temperature and particle velocity on the erosion of a silicon carbide continuous fibre reinforced calcium aluminosilicate glass-ceramic matrix composite In: International Conference on Erosion, Abrasion and Wear, 1998-09-13 - 1998-09-17, CHURCHILL COLL, CAMBRIDGE, ENGLAND.

Other

Yeomans, JA (2008) Structural Ceramics Network: Road Map Executive Summary .

This list was generated on Sun Feb 25 03:23:11 2018 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800