University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Author is "Xu, W"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 44.

Zhu, Xinyao, Xu, Wei and Qin, Yanding (2020) Effect of surface tension on the behavior of adhesive contact based on Maugis‒Dugdale model. European Journal of Mechanics - A/Solids, 81.

Liu, Guang-Yu, Xu, Wen-Jie, Govender, Nicolin and Wilke, Daniel N. (2020) A cohesive fracture model for discrete element method based on polyhedral blocks Powder Technology, 359. pp. 190-204.

Zhu, Xinyao, Zhai, Jian-Hui and Xu, Wei (2019) Analysis of surface-loaded problem of nonhomogeneous elastic half-plane with surface tension Mechanics of Materials, 129. pp. 254-264.

Bai, Xuefei, Ewins, David, Crocombe, Andrew and Xu, Wei (2018) A biomechanical assessment of hydraulic ankle-foot devices with and without micro-processor control during slope ambulation in trans-femoral amputees PLoS ONE, 13 (10), e0205093.

van Heesewijk, Alex, Crocombe, Andrew, Cirovic, Srdjan, Taylor, Matthew and Xu, Wei (2018) Evaluating the Effect of Changes in Bone Geometry on the Trans-femoral Socket-Residual Limb Interface Using Finite Element Analysis In: World Congress on Medical Physics and Biomedical Engineering 2018. IFMBE Proceedings. Springer, Singapore, pp. 587-591. ISBN 978-981-10-9037-0 Online ISBN: 978-981-10-9038-7

Govender, Nicolin, Wilke, D, Wu, Charley, Khinast, J, Pizette, P and Xu, W (2018) Hopper flow of irregularly shaped particles (non-convex polyhedra): GPU-based DEM simulation and experimental validation Chemical Engineering Science, 188. pp. 34-51.

Zhu, Xinyao, Cirovic, Srdjan, Shaheen, Aliah and Xu, Wei (2017) Investigation of Fullerenol-induced changes in poroelasticity of human hepatocellular carcinoma by AFM-based creep tests Biomechanics and Modeling in Mechanobiology.

Zhu, Xinyao and Xu, Wei (2017) Effect of surface tension on the behavior of adhesive contact based on Lennard-Jones potential law Journal of the Mechanics and Physics of Solids, 111. pp. 170-183.

Zhu, Xinyao and Xu, Wei (2017) The effect of bottom boundary condition type on the behavior of adhesive contact of spherical probe on an elastic film Journal of Physics D: Applied Physics, 50 (46), 465305.

Bai, X, Ewins, David, Crocombe, Andrew and Xu, Wei (2017) Kinematic and biomimetic assessment of a hydraulic ankle/foot in level ground and camber walking PLoS One, 12 (7), 0180836.

Xu, Wei (2017) Supporting data for "Kinematic and biomimetic assessment of a hydraulic ankle/foot in level ground and camber walking" [Dataset]

Xu, Wei, Haidar, AS, Lorenzelli, L, Papadimitriou, V, Alcobia, C, Pierobon, R, Lopatka, R and Gao, J (2017) Development of a SocketMaster system for optimising the design of prosthetic socket for above knee amputees In: The ISPO World Congress 2017, 2017-05-08 - 2017-05-11, Cape Town, SA.

Wang, K, Geng, J, Jones, D and Xu, W (2016) Comparison of the fracture resistance of dental implants with different abutment taper angles. Materials science & engineering. C, Materials for biological applications, 63. pp. 164-171.

Xu, DH, Crocombe, Andrew and Xu, W (2016) Numerical evaluation of bone remodelling associated with trans-femoral osseointegration implant--A 68 month follow-up study. Journal of Biomechanics, 49 (3). pp. 488-492.

Akhtar, S, Warburton, S and Xu, W (2015) The use of an online learning and teaching system for monitoring computer aided design student participation and predicting student success International Journal of Technology and Design Education. pp. 1-20.

R. Reina, T, Xu, W, Ivanova, S, Centenoa, MA, Hanson, J, Rodriguez, JA and Odriozola, JA (2013) In situ characterization of iron-promoted ceria-alumina gold catalysts during the water-gas shift reaction Catalysis Today, 205. pp. 41-48.

Akhtar, SA, Warburton, S and Xu, W (2013) Development and Preliminary Evaluation of an Interactive System to Support CAD Teaching 2013 IEEE INTERNATIONAL SYMPOSIUM ON MULTIMEDIA (ISM). pp. 480-485.

He, Y, Jiang, P-L, Geng, J-P, Wang, Y, Zhou, J-Q and Xu, W (2013) Biomechanical analysis of the implants in highly absorbed maxillary sinus district Chinese Journal of Tissue Engineering Research, 17 (20). pp. 3679-3686.

Adediran, OA, Abdel Wahab, MM, Xu, W and Crocombe, AD (2012) Application of FE model updating for damage assessment of FRP composite beam structure Conference Proceedings of the Society for Experimental Mechanics Series, 6. pp. 385-398.

Sha, W, Leitner, H, Guo, Z and Xu, W (2012) Phase transformations in maraging steels In: Phase Transformations in Steels. UNSPECIFIED, pp. 332-362. ISBN 9781845699710

Ramirez Reina, T, Xu, W, Ivanova, S, Centeno, MA, Hanson, J, Rodriguez, JA and Odriozola, JA (2012) Operando characterization of iron-promoted ceria-alumina gold catalysts during the water-gas shift reaction In: 4th International Congress on Operando Spectroscopy, 2012-04-29 - 2012-05-03, Brookhaven National Laboratory, Upton, NY, USA.

Yang, Y, Rahmanivahid, P, Xu, W and Crocombe, AD (2011) A finite element analysis and experimental study of human edentulous mandible In: 3rd BSEC 2011, 2011-03-15 - 2011-03-17, Knoxville, USA.

Wei, H and Xu, W (2010) A progressive approach for building extraction by fusing LIDAR data and co-registered bands

Xu, W and Phillips, M (2010) Application of GPRS technique for traffic data collection system communication software development and system evluation In: 2010 2nd ICCNT, 2010-04-23 - 2010-04-25, Bangkok, Thailand.

Wei, H and Xu, W (2009) Application of wavelet transform in analysing vibration signals acquired for vehicle speed measurement In: SIP 2009, 2009-08-17 - 2009-08-19, Honolulu, USA.

Xu, W and Robinson, K (2008) X-ray image review of the bone remodeling around an osseointegrated trans-femoral implant and a finite element simulation case study ANNALS OF BIOMEDICAL ENGINEERING, 36 (3). pp. 435-443.

Xu, W, Wang, RC, Zhang, JC, Jin, DW, Barsoum, N, Uatrongjit, S and Vasant, P (2008) DEVELOPMENT OF A TACTILE AND SLIP SENSOR CONTROLLED PROSTHETIC HAND SYSTEM In: International Conference on Power Control and Optimization, 2008-07-18 - 2008-07-20, Chiang Mai, THAILAND.

Xu, W (2008) Instrumentation and Experiment Design for In-vitro Interface Temperature Measurement During the Insertion of an Orthopaedic Implant In: 10th International Conference on Control, Automation, Robotics and Vision, 2008-12-17 - 2008-12-20, Hanoi, VIETNAM.

Shao, F, Xu, W, Crocombe, A and Ewins, D (2007) Natural frequency analysis of osseointegration for trans-femoral implant ANNALS OF BIOMEDICAL ENGINEERING, 35 (5). pp. 817-824.

Wang, RC, Jiang, MW, Jin, DW, Zhang, JC, Zhang, MQ, Hu, X, Xu, W and Luo, ZZ (2006) Development of a new tactile-slip sensor for EMG controlled prosthetic hand In: International Conference on Sensing, Computing and Automation, 2006-05-08 - 2006-05-11, Chongqing, PEOPLES R CHINA.

Xu, W, Xu, DH and Crocombe, AD (2006) Three-dimensional finite element stress and strain analysis of a transfemoral osseointegration implant PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 220 (H6). pp. 661-670.

Xu, W, Wei, H, Yu, S and Gao, J (2006) Shadow speckle correlation method for 3D tooth reconstruction International Journal of Computer Assisted Radiology and Surgery, 1 (SUPPL.).

Gao, JX, Xu, W and Ding, ZQ (2006) 3D finite element mesh generation of complicated tooth model based on CT slices COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, 82 (2). pp. 97-105.

Gao, JX, Xu, W and Geng, JP (2006) 3D shape reconstruction of teeth by shadow speckle correlation method OPTICS AND LASERS IN ENGINEERING, 44 (5). pp. 455-465.

Zhang, JK and Xu, W (2006) Web service-based Healthcare information system (WSHIS): A case study for system interoperability concern in Healthcare field

Gao, JX, Xu, W and Geng, JP (2005) Use of shadow-speckle correlation method for 3D tooth model reconstruction INTERNATIONAL JOURNAL OF PROSTHODONTICS, 18 (5). pp. 436-437.

Huang, WM and Xu, W (2005) Hysteresis in shape memory alloys. Is it always a constant? JOURNAL OF MATERIALS SCIENCE, 40 (11). pp. 2985-2986.

Xu, W, Frank, TG and Cuschieri, A (2005) Development of a shape memory alloy multiple-point injector for chemotherapy PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 219 (H3). pp. 213-217.

Xu, W, Shao, F and Ewins, D (2005) A resonant frequency measurement system for osseointegration trans-femoral implant MEASUREMENT TECHNOLOGY AND INTELLIGENT INSTRUMENTS VI, 295-29. pp. 139-144.

Geng, JP, Ma, QS, Xu, W, Tan, KBC and Liu, GR (2004) Finite element analysis of four thread-form configurations in a stepped screw implant JOURNAL OF ORAL REHABILITATION, 31 (3). pp. 233-239.

Xu, W, Shao, F and Hughes, S (2002) A shape memory alloy overload protection device for osseointegrated trans-femoral implant prosthetic limb attachment system In: International Symposium on Smart Materials, Nano-, and Micro-Smart Systems, 2002-12-16 - 2002-12-18, RMIT UNIV, MELBOURNE, AUSTRALIA.

Xu, W and Hughes, S (2001) Development of thermal measurement system for investigating temperature distribution at bone-implant interface In: 5th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2001), 2001-09-25 - 2001-09-29, GIZA, EGYPT.

Xu, W, Crocombe, AD and Hughes, SC (2000) Finite element analysis of bone stress and strain around a distal osseointegrated implant for prosthetic limb attachment PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 214 (H6). pp. 595-602.

Crocombe, AD, Xu, DH and Xu, W A Study of Strain Related Bone Remodelling of the Osseointegrated Patient In: 8th European Cells and Materials Meeting, 2007-06 - ?, Davos Switzerland.

This list was generated on Mon Aug 10 09:56:31 2020 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800