University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Author is "Hills, N"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 65.

Article

Misev, Cyril and Hills, Nicholas (2017) Steepest Descent Optimisation of Runge-Kutta Coefficients for Second Order Implicit Finite Volume CFD Codes Journal of Computational Physics.

Noor Mohamed, Sulfickerali, Chew, John and Hills, Nicholas (2017) Effect of bolts on flow and heat transfer in a rotor-stator disc cavity ASME Journal of Engineering for Gas Turbines and Power, 139 (5), 051901.

Pitz, DB, Chew, J, Marxen, O and Hills, NJ (2016) Direct Numerical Simulation of Rotating Cavity Flows Using a Spectral Element-Fourier Method Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.

Noor Mohamed, S, Chew, J and Hills, N (2016) Flow and windage due to bolts on a rotating disc Journal of Mechanical Engineering Science (Part C, Proc. IMechE).

Ganine, V, Amirante, D and Hills, N (2015) Enhancing performance and scalability of data transfer across sliding grid interfaces for time-accurate unsteady simulations of multistage turbomachinery flows COMPUTERS & FLUIDS, 115. pp. 140-153.

Sun, Zhili, Amirante, Dario, Chew, John and Hills, Nicholas (2015) Coupled Aero-Thermal Modeling of a Rotating Cavity with Radial Inflow Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.

Amirante, D and Hills, NJ (2015) Large-Eddy Simulations of Wall Bounded Turbulent Flows Using Unstructured Linear Reconstruction Techniques JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 137 (5), ARTN 05100.

Montomoli, F, Amirante, D, Hills, N, Shahpar, S and Massini, M (2015) Uncertainty Quantification, Rare Events, and Mission Optimization: Stochastic Variations of Metal Temperature During a Transient JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 137 (4), ARTN 04210.

Javiya, U, Chew, J, Hills, N and Scanlon, T (2015) Coupled FE-CFD Thermal Analysis for a Cooled Turbine DisK PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE.

Jammy, SP, Hills, N and Birch, DM (2014) Boundary conditions and vortex wandering Journal of Fluid Mechanics, 747. pp. 350-368.

Javiya, U, Chew, J, Hills, N, Dullenkopf, K and Scanlon, T (2013) Evaluation of Computational Fluid Dynamics and Coupled Fluid-Solid Modeling for a Direct Transfer Preswirl System JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 135 (5), ARTN 0.

Amirante, D, Hills, NJ and Barnes, CJ (2012) A moving mesh algorithm for aero-thermo-mechanical modelling in turbomachinery International Journal for Numerical Methods in Fluids, 70 (9). pp. 1118-1138.

Ganine, V, Javiya, U, Hills, N and Chew, J (2012) Coupled Fluid-Structure Transient Thermal Analysis of a Gas Turbine Internal Air System With Multiple Cavities JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 134 (10), ARTN 1.

Amirante, D, Hills, NJ and Barnes, CJ (2012) Thermo-Mechanical Finite Element Analysis/Computational Fluid Dynamics Coupling of an Interstage Seal Cavity Using Torsional Spring Analogy JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 134 (5), ARTN 0.

Amirante, D, Hills, NJ and Barnes, CJ (2012) USE OF DYNAMIC MESHES FOR TRANSIENT METAL TEMPERATURE PREDICTION PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 4, PTS A AND B. pp. 2073-2084.

Sun, ZX, Chew, JW, Hills, NJ, Lewis, L and Mabilat, C (2012) Coupled Aerothermomechanical Simulation for a Turbine Disk Through a Full Transient Cycle J TURBOMACH, 134 (1), 011014.

Sun, Z, Chew, JW, Hills, NJ, Barnes, CJ and Valencia, AG (2012) 3D coupled fluid-solid thermal simulation of a turbine disc through a transient cycle Proceedings of the ASME Turbo Expo, 4 (PARTS). pp. 1959-1969.

Javiya, U, Chew, J, Hills, N, Dullenkopf, K and Scanlon, T (2012) Evaluation of CFD and coupled fluid-solid modelling for a direct transfer pre-swirl system Proceedings of the ASME Turbo Expo, 4 (PARTS). pp. 2179-2190.

Hills, N (2012) Foreword to JPAS special issue on applied computational aerodynamics and high performance computing in the UK Progress in Aerospace Sciences, 52.

Vinod Kumar, BG, Chew, John and Hills, Nicholas (2012) Rotating flow and heat transfer in cylindrical cavities with radial inflow Proceedings of the ASME Turbo Expo, 4 (PARTS). pp. 2047-2060.

O'Mahoney, T, Hills, N and Chew, J (2012) Sensitivity of LES results from turbine rim seals to changes in grid resolution and sector size Progress in Aerospace Sciences.

Javiya, U, Chew, JW, Hills, NJ, Zhou, L, Wilson, M and Lock, GD (2011) CFD analysis of flow and heat transfer in a direct transfer preswirl system Journal of Turbomachinery, 134 (3).

O'Mahoney, TSD, Hills, Nicholas, Chew, John and Scanlon, T (2011) Large-Eddy simulation of rim seal ingestion PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 225 (C12). pp. 2881-2891.

Sun, Z, Chew, J, Hills, N, Volkov, K and Barnes, C (2010) Efficient Finite Element Analysis/Computational Fluid Dynamics Thermal Coupling for Engineering Applications Journal of Turbomachinery, 132 (3).

Chew, JW and Hills, NJ (2009) Computational fluid dynamics and virtual aeroengine modelling PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 223 (12). pp. 2821-2834.

Chew, JW and Hills, NJ (2007) Computational fluid dynamics for turbomachinery internal air systems PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 365 (1859). pp. 2587-2611.

Hills, N (2007) Achieving high parallel performance for an unstructured unsteady turbomachinery CFD code AERONAUTICAL JOURNAL, 111 (1117). pp. 185-193.

Boudet, J, Hills, NJ and Chew, JW (2006) Numerical simulation of the flow interaction between turbine main annulus and disc cavities Proceedings of the ASME Turbo Expo, 6 PART. pp. 553-562.

Illingworth, JB, Hills, NJ and Barnes, CJ (2005) 3D fluid-solid heat transfer coupling of an aero engine pre-swirl system Proceedings of the ASME Turbo Expo 2005, Vol 3 Pts A and B. pp. 801-811.

Sun, Zixiang, Chew, John, Kifoil, A and Hills, Nicholas (2004) Numerical simulation of natural convection in stationary and rotating cavities Proceedings of the ASME Turbo Expo 2004, 4. pp. 381-389.

Chew, JW, Hills, NJ, Turner, AB, Khalatov, S and Scanlon, T (2003) Measurement and analysis of flow in a pre-swirled cooling air delivery system American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 913-920.

Guardino, C, Chew, JW and Hills, NJ (2002) Calculation of surface roughness effects on air-riding seals American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B. pp. 795-803.

Gentilhomme, O, Hills, Nicholas, Turner, AB and Chew, John (2002) Measurement and analysis of ingestion through a turbine rim seal American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B. pp. 925-934.

Hills, NJ, Chew, JW and Turner, AB (2001) Computational and mathematical modelling of turbine rim seal ingestion Proceedings of the ASME Turbo Expo, 3.

Verdicchio, JA, Chew, JW and Hills, NJ (2001) Coupled fluid/solid heat transfer computation for turbine discs Proceedings of the ASME Turbo Expo, 3.

Alexiou, A, Hills, NJ, Long, CA, Turner, AB, Wong, LS and Millward, JA (2000) Discharge coefficients for flow through holes normal to a rotating shaft INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 21 (6). pp. 701-709.

Alexiou, A, Hills, NJ, Long, C, Turner, AB and Millward, JA (2000) Heat transfer in high-pressure compressor gas turbine internal air systems: A arotating disc-cone cavity with axial throughflow Experimental Heat Transfer, 13 (1-4). pp. 299-328.

Alexiou, A, Hills, NJ, Long, CA and Turner, AB (2000) Heat transfer in high-pressure compressor gas turbine internal air systems: A rotating disc-cone cavity with axial throughflow EXPERIMENTAL HEAT TRANSFER, 13 (4). pp. 299-328.

Turner, AB, Long, CA, Childs, PRN, Hills, NJ and Millward, JA (1997) Review of some current problems in gas turbine secondary systems American Society of Mechanical Engineers (Paper).

Conference or Workshop Item

Kumar, Ramesh, Chew, John, Amirante, Dario, Murua, J and Hills, Nicholas (2017) CFD Simulation of Blade Flows With High Amplitude Pitching In: ASME 2017 Turbomachinery Technical Conference & Exposition (Turbo Expo), 2017-06-26 - 2017-06-30, Charlotte, North Carolina, USA.

Gao, Feng, Chew, John, Beard, PF, Amirante, Dario and Hills, Nicholas (2017) Numerical Studies of Turbine Rim Sealing Flows on a Chute Seal Configuration In: 12th European Turbomachinery Conference, 2017-04-03 - 2017-04-07, Stockholm, Sweden.

Ganine, V, Amirante, D and Hills, N (2016) Aero-Thermo-Mechanical Modelling and Validation of Transient Effects in a High Pressure Turbine Internal Air System In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, 2016-06-13 - 2016-06-17, Seoul, South Korea.

Chew, J, Pitz, DB, Marxen, O and Hills, N (2016) DIRECT NUMERICAL SIMULATION OF ROTATING CAVITY FLOWS USING A SPECTRAL ELEMENT-FOURIER METHOD In: ASME Turbo Expo 2016:, 2016-06-13 - 2016-06-17, Seoul, Korea.

Noor Mohamed, S, Chew, J and Hills, NJ (2016) EFFECT OF BOLTS ON FLOW AND HEAT TRANSFER IN A ROTOR-STATOR DISC In: ASME Turbo Expo 2016, 2016-06-13 - 2016-06-17, Seoul, South Korea.

Chew, J, Onori, M, Amirante, D and Hills, NJ (2016) LES VALIDATION FOR A ROTATING CYLINDRICAL CAVITY WITH RADIAL INFLOW In: ASME Turbo Expo 2016, 2016-06-13 - 2016-06-16, Seoul, South Korea.

Amirante, D, Sun, Z, Chew, JW, Hills, NJ and Atkins, NR (2016) MODELING OF COMPRESSOR DRUM CAVITIES WITH RADIAL INFLOW In: ASME Turbo Expo 2016 Power for Land, Sea and Air, 2016-06-13 - 2016-06-17, Seoul, South Korea.

Koli, B, Chew, JW, Hills, NJ and Scanlon, T (2014) CFD INVESTIGATION OF A FLUIDIC DEVICE FOR MODULATION OF AERO-ENGINE COOLING AIR In: ASME Turbo Expo: Turbine Technical Conference and Exposition, 2014-06-16 - 2014-06-20, Dusseldorf, GERMANY.

Amirante, D and Hills, NJ (2014) LES OF WALL BOUNDED TURBULENT FLOWS USING UNSTRUCTURED LINEAR RECONSTRUCTION TECHNIQUES In: ASME Turbo Expo: Turbine Technical Conference and Exposition, 2014-06-16 - 2014-06-20, Dusseldorf, GERMANY.

Montomoli, F, Amirante, D, Hills, N, Shahpar, S and Massini, M (2014) UNCERTAINTY QUANTIFICATION, RARE EVENTS AND MISSION OPTIMIZATION: STOCHASTIC VARIATIONS OF METAL TEMPERATURE DURING A TRANSIENT In: ASME Turbo Expo: Turbine Technical Conference and Exposition, 2014-06-16 - 2014-06-20, Dusseldorf, GERMANY.

Javiya, U, Chew, J, Hills, N and Scanlon, T (2011) A comparative study of cascade vanes and drilled nozzle designs for pre-swirl In: ASME Turbo Expo 2011, 2011-06-06 - 2011-06-10.

Javiya, U, Chew, J, Hills, N, Zhou, L, Wilson, M and Lock, G (2010) CFD ANALYSIS OF FLOW AND HEAT TRANSFER IN A DIRECT TRANSFER PRE-SWIRL SYSTEM In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

Sun, Z, Chew, JW, Hills, NJ, Lewis, L and Mabilat, C (2010) COUPLED AERO-THERMO-MECHANICAL SIMULATION FOR A TURBINE DISC THROUGH A FULL TRANSIENT CYCLE In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

O'Mahoney, TSD, Hills, Nicholas, Chew, John and Scanlon, T (2010) LARGE-EDDY SIMULATION OF RIM SEAL INGESTION In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

Amirante, D, Hills, NJ and Barnes, CJ (2010) THERMO-MECHANICAL FEA/CFD COUPLING OF AN INTERSTAGE SEAL CAVITY USING TORSIONAL SPRING ANALOGY In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

Lott, PT, Hills, NJ, Chew, JW, Scanlon, T and Shahpar, S (2009) HIGH PRESSURE TURBINE STAGE ENDWALL PROFILE OPTIMISATION FOR PERFORMANCE AND RIM SEAL EFFECTIVENESS In: 54th ASME Turbo Expo 2009, 2009-06-08 - 2009-06-12, Orlando, FL.

Sun, Z, Chew, JW, Hills, NJ, Volkov, KN and Barnes, CJ (2008) EFFICIENT FEA/CFD THERMAL COUPLING FOR ENGINEERING APPLICATIONS In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Volkov, KN, Hills, NJ and Chew, JW (2008) SIMULATION OF TURBULENT FLOWS IN TURBINE BLADE PASSAGES AND DISC CAVITIES In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Ciampoli, F, Hills, NJ, Chew, JW and Scanlon, T (2008) UNSTEADY NUMERICAL SIMULATION OF THE FLOW IN A DIRECT TRANSFER PRE-SWIRL SYSTEM In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Chew, J, Autef, V, Hills, N and Brunton, I (2007) Turbine Stator-well flow modelling In: 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, 2007-07-02 - 2007-07-05, Lyon, Francis.

Hills, NJ (2007) Whole turbine CFD modelling In: 52nd ASME Turbo Expo 2007, 2007-05-14 - 2007-05-17, Montreal, CANADA.

Boudet, J, Autef, VND, Chew, JW, Hills, NJ and Gentilhomme, O (2005) Numerical simulation of rim seal flows in axial turbines In: RAeS Aerospace Aerodynamics Research Conference, 2004-09 - ?, London, ENGLAND.

Chew, JW, Ciampoli, F, Hills, NJ and Scanlon, T (2005) Pre-swirled cooling air delivery system performance In: 50th ASME Turbo-Expo, 2005-06-06 - 2005-06-09, Reno, NV.

Guardino, C, Chew, JW and Hills, NJ (2004) Calculation of surface roughness effects on air-riding seals In: 47th International Gas Turbine and Aeroengine Congress and Exhibition, 2002-06-03 - 2002-06-06, AMSTERDAM, NETHERLANDS.

Gentilhomme, O, Hills, Nicholas, Turner, AB and Chew, John (2003) Measurement and analysis of ingestion through a turbine rim seal In: International Gas Turbine and Aeroengine Congress and Exhibition, 2002-06-03 - 2002-06-06, AMSTERDAM, NETHERLANDS.

Hills, NJ, Chew, JW and Turner, AB (2002) Computational and mathematical modeling of turbine rim seal ingestion In: 46th International Congress and Exhibition on Gas Turbines and Aeroengines, 2001-06-04 - 2001-06-07, NEW ORLEANS, LOUISIANA.

This list was generated on Mon Nov 20 17:34:57 2017 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800