University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Author is "Hamerton, I"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 164.

Article

Swiech, Weronika, Hamerton, Ian, Zeng, Huang, Watson, David J., Mason, Eleonore and Taylor, Spencer (2017) Water-based fractionation of a commercial humic acid. Solid-state and colloidal characterization of the solubility fractions Journal of Colloid and Interface Science, 508. pp. 28-38.

Sairi, Maryam, Howlin, Brendan, Watson, D.J. and Hamerton, I. (2017) Prediction of the char formation of polybenzoxazines: The effect of heterogeneities in the crosslinked network to the prediction accuracy in quantitative structure-properties relationship (QSPR) model Reactive and Functional Polymers.

Pozegic, TR, Anguita, JV, Hamerton, I, Jayawardena, KDGI, Chen, J-S, Stolojan, V, Ballocchi, P, Walsh, R and Silva, SRP (2016) Multi-Functional Carbon Fibre Composites using Carbon Nanotubes as an Alternative to Polymer Sizing Scientific Reports, 6, 37334.

Hamerton, I, Tang, W, Anguita, JV, Silva, SRP and Stute, T (2016) Using Molecular Simulation to Explore Unusually Low Moisture Uptake in Amine-Cured Epoxy Carbon Fiber Reinforced Nanocomposites MACROMOLECULAR CHEMISTRY AND PHYSICS, 217 (11). pp. 1282-1292.

Douse, E, Kopsidas, S, Jesson, DA and Hamerton, I (2016) Modification of stress-strain behaviour in aromatic polybenzoxazines using core shell rubbers Reactive and Functional Polymers, 103. pp. 117-130.

Howlin, BJ, Crawford, AO, Cavalli, G and Hamerton, I (2016) Investigation of structure property relationships in liquid processible, solvent free, thermally stable bismaleimide-triazine (BT) resins Reactive and Functional Polymers.

Sairi, Maryam, Howlin, Brendan and Hamerton, Ian (2016) Developing (Quantitative Structure Property Relationships) QSPR Techniques to Predict the Char Formation of Polybenzoxazines Polymers, 8 (5).

Hassan, WAW, Liu, J, Howlin, BJ, Ishida, H and Hamerton, I (2016) Examining the influence of bisphenol A on the polymerisation and network properties of an aromatic benzoxazine Polymer, 88. pp. 52-62.

Watts, JF, White, CM, Hamerton, I and Banks, R (2015) Characterisation of commercially CVD grown multi-walled carbon nanotubes for paint applications Progress in Organic Coatings.

Hamerton, I, Tang, W, Anguita, JV and Silva, SRP (2015) Dramatic reductions in water uptake observed in novel POSS nanocomposites based on anhydride-cured epoxy matrix resins Materials Today Communications, 4. pp. 186-198.

Cavalli, G, Hamerton, I and Lygo-Baker, S (2015) What are we going to do about a problem like polymer chemistry? Develop new methods of delivery to improve understanding of a demanding interdisciplinary topic CHEMISTRY EDUCATION RESEARCH AND PRACTICE, 16 (2). pp. 293-301.

Hamerton, I, Howlin, BJ, Mooring, L, Stone, C, Swan, M and Thompson, S (2014) Studying the effect of the chloral group on the thermal and physical properties of aromatic cyanate esters POLYMER DEGRADATION AND STABILITY, 110. pp. 435-446.

Hamerton, I, McNamara, LT, Howlin, BJ, Smith, PA, Cross, P and Ward, S (2014) Developing Toughened Aromatic Polybenzoxazines Using Thermoplastic Oligomers and Telechelics, Part 1: Preparation and Characterization of the Functionalized Oligomers JOURNAL OF APPLIED POLYMER SCIENCE, 131 (19), ARTN 4.

Hamerton, I, Howlin, BJ and Yeung, S-YC (2014) Studying structure-property relationships in oligomeric engineering thermoplastics by controlled preparation of low molecular weight polymers Reactive and Functional Polymers, 81 (1). pp. 22-32.

Hamerton, I, McNamara, LT, McNamara, LT, Howlin, BJ, Smith, PA, Cross, P and Ward, S (2014) Examining the kinetics of the thermal polymerization of commercial aromatic bis-benzoxazines Journal of Polymer Science, Part A: Polymer Chemistry, 52 (14). pp. 2068-2081.

Baggott, A, Bass, JR, Hall, SA, Hamerton, I, Howlin, BJ, Mooring, L and Sparks, D (2014) At the limits of simulation: A new method to predict thermal degradation behavior in cyanate esters and nanocomposites using molecular dynamics simulation Macromolecular Theory and Simulations, 23 (6). pp. 369-372.

Hamerton, I, McNamara, LT, Howlin, BJ, Smith, PA, Cross, P and Ward, S (2014) Kinetics and Cure Mechanism in Aromatic Polybenzoxazines Modified Using Thermoplastic Oligomers and Telechelics MACROMOLECULES, 47 (6). pp. 1935-1945.

Hamerton, I, McNamara, LT, Howlin, BJ, Smith, PA, Cross, P and Ward, S (2014) Toughening Mechanisms in Aromatic Polybenzoxazines Using Thermoplastic Oligomers and Telechelics MACROMOLECULES, 47 (6). pp. 1946-1958.

Hamerton, Ian, Howlin, Brendan and Tilbrook, DA (2014) Examining the preparation and characterization of coatings based on linear aromatic terpoly(methoxy-cyanurate-thiocyanurate)s Polymer International, 63 (1). pp. 60-71.

Pozegic, TR, Anguita, JV, Tang, W, Silva, SRP, Hamerton, I, Ballocchi, P and Jenkins, P (2014) Low temperature growth of carbon nanotubes on carbon fibre to create a highly networked fuzzy fibre reinforced composite with superior electrical conductivity Carbon.

Hamerton, Ian, Tang, Winnie, Anguita, Jose and Silva, S (2013) Towards the rational design of polymers using molecular simulation: Predicting the effect of cure schedule on thermo-mechanical properties for a cycloaliphatic amine-cured epoxy resin REACTIVE & FUNCTIONAL POLYMERS, 74. pp. 1-15.

Hamerton, I, Heap, K, Howlin, BJ and McNamara, LT (2013) Effects of thermal history on the polymerisation mechanism and network development in aromatic polybenzoxazines Reactive and Functional Polymers.

Hamerton, I, Howlin, BJ and Smith, ER (2013) Using POSS reagents to reduce hydrophobic character in polypropylene nanocomposites Journal of Materials Chemistry A, 1 (41). pp. 12971-12980.

Devaraju, S, Vengatesan, MR, Selvi, M, Alagar, M, Kumar, AA, Hamerton, I and Go, JS (2013) Low surface free energy cyanate ester-silica hybrid (CE-SiO) nanomaterials for low k dielectric applications RSC Advances, 3 (31). pp. 12915-12921.

Hamerton, I, Howlin, BJ and Tilbrook, DA (2013) Examining structure property relationships in coatings based on substituted linear aromatic polycyanurates REACTIVE & FUNCTIONAL POLYMERS, 73 (8). pp. 1046-1057.

Hamerton, Ian, Howlin, Brendan and Tilbrook, DA (2013) Examining thermal stability and structure property relationships in coatings based on linear aromatic poly(methoxy-thiocyanurate)s Polymer Degradation and Stability, 98 (11). pp. 2201-2207.

Hamerton, I, McNamara, LT, Howlin, BJ, Smith, PA, Cross, P and Ward, S (2013) Examining the Initiation of the Polymerization Mechanism and Network Development in Aromatic Polybenzoxazines. Macromolecules, 46 (13). pp. 5117-5132.

Hamerton, I, Tang, W, Anguita, JV and Silva, SRP (2013) Towards the rational design of polymers using molecular simulation: predicting the effects of cure schedule on thermomechanical properties for a cycloaliphatic amine-cured epoxy resin

Hamerton, I, Howlin, BJ and Yeung, S-YC (2013) Designing thermoplastic oligomers with programmed degradation mechanisms using a combined empirical and simulation approach Polymer Degradation and Stability, 98 (4). pp. 829-838.

Hamerton, I, Howlin, BJ, Mhlanga, P and Wan Hassan, WA (2013) Using QSPR techniques to predict char yield arising from the thermal degradation of polybenzoxazines Polymer Degradation and Stability, 98 (1). pp. 446-452.

Wan Hassan, WA, Hamerton, I and Howlin, BJ (2013) Prediction of selected physical and mechanical properties of a telechelic polybenzoxazine by molecular simulation. PLoS One, 8 (4).

Mhlanga, P, Wan Hassan, WA, Hamerton, I and Howlin, BJ (2013) Using combined computational techniques to predict the glass transition temperatures of aromatic polybenzoxazines. PLoS One, 8 (1).

Hamerton, I, Howlin, BJ, Mitchell, AL, McNamara, LT and Takeda, S (2012) Systematic examination of thermal, mechanical and dielectrical properties of aromatic polybenzoxazines Reactive and Functional Polymers, 72 (10). pp. 736-744.

Crawford, AO, Howlin, BJ, Cavalli, G and Hamerton, I (2012) Examining the thermo-mechanical properties of novel cyanate ester blends through empirical measurement and simulation Reactive and Functional Polymers, 72 (9). pp. 596-605.

Hamerton, I, Howlin, BJ, Jewell, SL and Patel, P (2012) Studying the co-reaction of propenyl-substituted cyanate ester-bismaleimide blends using model compounds REACTIVE & FUNCTIONAL POLYMERS, 72 (4). pp. 279-286.

Hamerton, I, Glynn, S, Hay, JN, Pullinger, MA and Shaw, SJ (2012) Studies of polycyanurates based on phenoxy-substituted cyclic phosphazenes: Synthesis of the monomer and a preliminary study of its thermal properties in binary blends Polymer Degradation and Stability, 97 (4). pp. 679-689.

Zhang, W, Shiozawa, H, Wu, CW, Hamerton, I, Cox, DC and Silva, SR (2012) The effect of pH on the functionalization of nylon fabric with carbon nanotubes. J Nanosci Nanotechnol, 12 (1). pp. 84-90.

Crawford, AO, Hamerton, I, Cavalli, G and Howlin, BJ (2012) Quantifying the Effect of Polymer Blending through Molecular Modelling of Cyanurate Polymers. PLoS One, 7 (9).

Hall, SA, Howlin, BJ, Hamerton, I, Baidak, A, Billaud, C and Ward, S (2012) Solving the problem of building models of crosslinked polymers: an example focussing on validation of the properties of crosslinked epoxy resins. PLoS One, 7 (8).

Hamerton, I, Howlin, BJ and Pratt, CR (2010) Simulation of the free energy of mixing for blend components in a new family of flexible polycyanurates Polymer, 51 (24). pp. 5857-5868.

Nagendiran, S, Alagar, M and Hamerton, I (2010) Octasilsesquioxane-reinforced DGEBA and TGDDM epoxy nanocomposites: Characterization of thermal, dielectric and morphological properties ACTA MATERIALIA, 58 (9). pp. 3345-3356.

Selvaraj, V, Grace, AN, Alagar, M and Hamerton, I (2010) Antimicrobial and Anticancer Efficacy of Antineoplastic Agent Capped Gold Nanoparticles JOURNAL OF BIOMEDICAL NANOTECHNOLOGY, 6 (2). pp. 129-137.

Hamerton, I, Howlin, BJ, Klewpatinond, P and Takeda, S (2009) Examination of the Thermal and Thermomechanical Behavior of Novel Cyanate Ester Homopolymers and Blends with Low Coefficients of Thermal Expansion MACROMOLECULES, 42 (20). pp. 7718-7735.

Nagendiran, S, Chozhan, CK, Alagar, M and Hamerton, I (2008) Inorganic/organic hybrid nanocomposites involving OMMT clay and cyanate ester-siloxane-modified epoxy resin: Thermal, dielectric and morphological properties HIGH PERFORMANCE POLYMERS, 20 (3). pp. 323-347.

Hall, SA, Hamerton, I, Howlin, BJ and Mitchell, AL (2008) Validating software and force fields for predicting the mechanical and physical properties of poly(bisbenzoxazine)s MOLECULAR SIMULATION, 34 (10-15), PII 90. pp. 1259-1266.

Jothibasu, S, Premkumar, S, Alagar, M and Hamerton, I (2008) Synthesis and characterization of a POSS-maleimide precursor for hybrid nanocomposites High Performance Polymers, 20 (1). pp. 67-85.

Selvaraj, V, Alagar, M and Hamerton, I (2007) Nanocatalysts impregnated polythiophene electrodes for the electrooxidation of formic acid APPLIED CATALYSIS B-ENVIRONMENTAL, 73 (1-2). pp. 172-179.

Selvaraj, V, Alagar, M and Hamerton, I (2006) Analytical detection and biological assay of antileukemic drug using gold nanoparticles ELECTROCHIM ACTA, 52 (3). pp. 1152-1160.

Selvaraj, V, Alagar, M and Hamerton, I (2006) Electrocatalytic properties of monometallic and bimetallic nanoparticles-incorporated polypyrrole films for electro-oxidation of methanol JOURNAL OF POWER SOURCES, 160 (2). pp. 940-948.

Hamerton, I, Emsley, AM, Hay, JN, Herman, H, Howlin, BJ and Jepson, P (2006) The development of controllable complex curing agents for epoxy resins - Part 3. An investigation of the shelf life and thermal dissociation behaviour of bis(acetanilido)tris(acetato)dicuprate(II) JOURNAL OF MATERIALS CHEMISTRY, 16 (3). pp. 255-265.

Hamerton, I, Howlin, BJ, Klewpatinond, P, Shortley, HJ and Takeda, S (2006) Developing predictive models for polycyanurates through a comparative study of molecular simulation and empirical thermo-mechanical data POLYMER, 47 (2). pp. 690-698.

Hamerton, I, Howlin, BJ and Mitchell, AL (2006) Developing poly(bis-benzoxazines) with improved fracture toughness. 1: Using molecular simulation to determine and predict structure-property relationships REACTIVE & FUNCTIONAL POLYMERS, 66 (1). pp. 21-39.

Allington, RD, Hamerton, I, Hay, JN, Howlin, BJ and Attwood, D (2005) Inverse gas chromatography characterization of carbon fiber surfaces - Effects of applied surface treatment HIGH PERFORMANCE POLYMERS, 17 (4). pp. 561-574.

Georgiades, A, Hamerton, I, Hay, JN, Herman, H and Shaw, SJ (2004) N-(2-biphenylenyl)-4-[2'-phenylethynyl] phthalimide: 2. Detailed study of the monomer cure and properties of the resulting polymer POLYMER INTERNATIONAL, 53 (7). pp. 877-884.

Hamerton, I, Emsley, AM, Howlin, BJ, Klewpatinond, P and Takeda, S (2004) Studies on a dicyanate containing four phenylene rings and polycyanurate copolymers. 3. Application of mathematical models to determine the kinetics of the thermal degradation processes POLYMER, 45 (7). pp. 2193-2199.

Allington, RD, Attwood, D, Hamerton, I, Hay, JN and Howlin, BJ (2004) Developing improved models of oxidatively treated carbon fibre surfaces, using molecular simulation COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 35 (10). pp. 1161-1173.

Hamerton, I, Emsley, AM, Howlin, BJ, Klewpatinond, P and Takeda, S (2003) Studies on a dicyanate containing four phenylene rings and polycyanurate blends. 2. Application of mathematical models to the catalysed polymerization process POLYMER, 44 (17). pp. 4839-4852.

Elliott, J, Hamerton, I, Hay, JN and Shaw, SJ (2003) Synthesis and characterisation of novel methyl methacrylate-2-(dimethylamino)ethyl methacrylate copolymer salts containing polymerisable anions POLYMER, 44 (14). pp. 3775-3784.

Hamerton, I, Hay, JN, Howgate, G, Howlin, BJ and O'Gara, P (2003) A novel phenylethynyl-terminated siloxane: Synthesis and electron beam cure HIGH PERFORMANCE POLYMERS, 15 (1). pp. 143-154.

Allington, RD, Attwood, D, Hamerton, I, Hay, JN and Howlin, BJ (2003) New force-field parameters for molecular simulations of s-triazine and cyanurate-containing systems. 2 - Application and comparison with different simulation methods POLYMER, 44 (3), PII S0032-. pp. 793-799.

Lu, SY and Hamerton, I (2002) Recent developments in the chemistry of halogen-free flame retardant polymers PROGRESS IN POLYMER SCIENCE, 27 (8), PII S0079-. pp. 1661-1712.

Hamerton, I, Howlin, BJ, Klewpatinond, P and Takeda, S (2002) Studies on a dicyanate containing four phenylene rings and polycyanurate blends. 1. Synthesis and polymerization of the monomers and characterization of the polymer blends using thermal and mechanical methods POLYMER, 43 (21), PII S0032-. pp. 5737-5748.

Hamerton, I, Howlin, BJ, Klewpatinond, P and Takeda, S (2002) Conformational studies of polycyanurates: a study of internal stress versus molecular structure POLYMER, 43 (17), PII S0032-. pp. 4599-4604.

Cunningham, ID, Danks, TN, Hay, JN, Hamerton, I, Gunathilagan, S and Janczak, C (2002) Stability of various metalloporphyrin catalysts during hydrogen peroxide epoxidation of alkene JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL, 185 (1-2), PII S1381-. pp. 25-31.

Hill, S, Hamerton, I, Hay, JN and Howlin, BJ (2002) Modelling the structural and physicomechanical properties of substituted poly(p-phenylene)s using molecular mechanical and molecular orbital methods POLYMER, 43 (15), PII S0032-. pp. 4103-4110.

Hamerton, I, Hay, JN, Herman, H, Howlin, BJ, Jepson, P and Gillies, DG (2002) The development of controllable complex curing agents for epoxy resins. II. Examining the dissociation and thermal behavior of transition metal-diamine complex-epoxy blends JOURNAL OF APPLIED POLYMER SCIENCE, 84 (13). pp. 2411-2424.

Hamerton, I, Herman, H, Mudhar, AK, Chaplin, A and Shaw, SJ (2002) Multivariate analysis of spectra of cyanate ester/bismaleimide blends and correlations with properties POLYMER, 43 (11), PII S0032-. pp. 3381-3386.

Georgiades, A, Hamerton, I, Hay, JN and Shaw, SJ (2002) N-(2-biphenylenyl)-4-[2 '-phenylethynyl] phthalimide - New monomer synthesis, cure and thermal properties of resulting high temperature polymer POLYMER, 43 (6). pp. 1717-1725.

Hamerton, I, Howlin, BJ and Jepson, P (2002) Metals and coordination compounds as modifiers for epoxy resins COORDINATION CHEMISTRY REVIEWS, 224 (1-2). pp. 67-85.

Hamerton, I and Klewpatinond, P (2001) Synthesis and characterization of functionalized thermoplastics as reactive modifiers for bismaleimide resins POLYMER INTERNATIONAL, 50 (12). pp. 1309-1317.

Cunningham, ID, Danks, TN, Hay, JN, Hamerton, I and Gunathilagan, S (2001) Evidence for parallel destructive, and competitive epoxidation and dismutation pathways in metalloporphyrin-catalysed alkene oxidation by hydrogen peroxide TETRAHEDRON, 57 (31). pp. 6847-6853.

Hamerton, I (2001) An electrifying future for plastics CHEMISTRY & INDUSTRY (12). pp. 369-370.

Hamerton, I, Hay, JN, Howlin, BJ, Jepson, P and Mortimer, S (2001) The development of controllable complex curing agents for epoxy resins. I. Preparation, characterization, and storage behavior of transition metal-diamine complexes JOURNAL OF APPLIED POLYMER SCIENCE, 80 (9). pp. 1489-1503.

Hamerton, I, Herman, H, Rees, KT, Chaplin, A and Shaw, SJ (2001) Water uptake effects in resins based on alkenyl-modified cyanate ester-bismaleimide blends POLYMER INTERNATIONAL, 50 (4). pp. 475-483.

Hamerton, I, Barton, JM, Chaplin, A, Howlin, BJ and Shaw, SJ (2001) The development of novel functionalised aryl cyanate esters. Part 2. Mechanical properties of the polymers and composites POLYMER, 42 (6). pp. 2307-2319.

Tilbrook, DA, Howlin, BJ and Hamerton, I (2001) Assessment of two methods for application in the prediction of the infrared spectra of polymers COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE, 11 (4). pp. 287-302.

Allington, RD, Attwood, D, Hamerton, I, Hay, JN and Howlin, BJ (2001) New force-field parameters for use in molecular simulations of s-triazine and cyanurate-containing systems. 1 - derivation and molecular structure synopsis COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE, 11 (6). pp. 467-473.

Chaplin, A, Hamerton, I, Herman, H, Mudhar, AK and Shaw, SJ (2000) Studying water uptake effects in resins based on cyanate ester/bismaleimide blends POLYMER, 41 (11). pp. 3945-3956.

Hamerton, I and Takeda, S (2000) A study of the polymerization of novel cyanate ester/acrylate blends POLYMER, 41 (5). pp. 1647-1656.

Hamerton, I, Hay, JN, Jones, JR and Lu, SY (2000) Covalent incorporation of 2,5-diphenyloxazole in sol-gel matrices and their application in radioanalytical chemistry CHEMISTRY OF MATERIALS, 12 (2). pp. 568-572.

Brown, J, Hamerton, I and Howlin, BJ (2000) Preparation, characterization, and thermal properties of controllable metal-imidazole complex curing agents for epoxy resins JOURNAL OF APPLIED POLYMER SCIENCE, 75 (2). pp. 201-217.

Pielichowski, K and Hamerton, I (2000) Compatible poly(vinyl chloride)/chlorinated polyurethane blends: thermal characteristics EUROPEAN POLYMER JOURNAL, 36 (1). pp. 171-181.

Bader, MG, Hamerton, I, Hay, JN, Kemp, M and Winchester, S (2000) Double cantilever beam testing of repaired carbon fibre composites COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 31 (6). pp. 603-608.

Hamerton, I, Hay, JN, Jones, JR and Lu, SY (2000) Radiochemical studies of the leaching of primary scintillator molecules from within sol-gel glasses JOURNAL OF MATERIALS CHEMISTRY, 10 (8). pp. 1761-1764.

Barton, JM, Chaplin, A, Hamerton, I and Howlin, BJ (1999) A new synthetic route for the preparation of alkenyl functionalized aryl cyanate ester monomers POLYMER, 40 (19). pp. 5421-5427.

Howlin, BJ, Allington, RD, Attwood, DA, Hamerton, I and Hay, JN (1999) Combined molecular simulation and experimental determination of the interfacial forces in carbon fiber resin composites. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 218. U681-U681.

Hamerton, I and Howlin, BJ (1999) Computer modelling and chemical kinetics of the cure of aerospace resin systems AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 71 (5). pp. 470-478.

Hamerton, I and Hay, JN (1998) Recent developments in the chemistry of cyanate esters POLYMER INTERNATIONAL, 47 (4). pp. 465-473.

Hamerton, I, Hay, JN, Jones, JR and Lu, SY (1998) Preparation of 2,5-diphenyloxazole doped sol-gel glasses and their application to radio-analytical chemistry JOURNAL OF MATERIALS CHEMISTRY, 8 (11). pp. 2429-2432.

Hamerton, I, Hay, JN, Howlin, BJ, Jones, JR and Lu, SY (1998) Molecular modelling of interactions at the composite interface between surface-treated carbon fibre and polymer matrices: the influence of surface functional groups JOURNAL OF MATERIALS CHEMISTRY, 8 (6). pp. 1333-1337.

Hamerton, I and Hay, JN (1998) Recent technological developments in cyanate ester resins HIGH PERFORMANCE POLYMERS, 10 (2). pp. 163-174.

Barton, JM, Hamerton, I, Howlin, BJ, Jones, JR and Liu, SY (1998) Studies of cure schedule and final property relationships of a commercial epoxy resin using modified imidazole curing agents POLYMER, 39 (10). pp. 1929-1937.

Pielichowski, K, Hamerton, I, Pielichowski, J and Stanczyk, P (1998) A study of the thermal properties of blends of poly(vinyl chloride) with novel epoxypropanecarbazole-based dyes by TGA/FTIR EUROPEAN POLYMER JOURNAL, 34 (5-6). pp. 653-657.

Allington, RD, Attwood, D, Hamerton, I, Hay, JN and Howlin, BJ (1998) Atomistic modelling of interfacial chemistry in carbon fibre-reinforced composites ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 215. U338-U338.

Aspin, IP, Hamerton, I, Howlin, BJ, Jones, JR and Parker, MJ (1998) The computer modelling and the chemical kinetics of the rate of cure of epoxy resins JOCCA-SURFACE COATINGS INTERNATIONAL, 81 (2). 68-+.

Pielichowski, K and Hamerton, I (1998) TGA/FTi.r. studies on the thermal stability of poly(vinyl chloride) blends with a novel colourant and stabilizer: 3-(2,4-dichlorophenylazo)-9-(2,3-epoxypropane)carbazole POLYMER, 39 (1). pp. 241-244.

Rabias, I, Hamerton, I, Howlin, BJ and Foot, PJS (1998) Theoretical studies of conducting polymers based on substituted polypyrroles COMPUTATIONAL AND THEORETICAL POLYMER SCIENCE, 8 (3-4). pp. 265-271.

Cunningham, ID, Brownhill, A, Hamerton, I and Howlin, BJ (1997) The ene reaction between maleimides and allyl-substituted aromatics TETRAHEDRON, 53 (39). pp. 13473-13494.

Hamerton, I, Hay, JN, Howlin, BJ, Jones, JR, Lu, SY, Webb, GA, Bader, MG, Brown, AM and Watts, JF (1997) ToF SIMS and XPS studies of carbon fiber surface during electrolytic oxidation in O-17/O-18 enriched aqueous electrolytes CHEMISTRY OF MATERIALS, 9 (9). pp. 1972-1977.

Hamerton, I, Hay, JN, Howlin, BJ, Jones, JR, Lu, SY, Webb, GA and Bader, MG (1997) A tritium-hydrogen exchange procedure for determining the concentration of exchangeable sites on PAN based carbon fibres HIGH PERFORMANCE POLYMERS, 9 (3). pp. 281-290.

Barton, JM, Deazle, AS, Hamerton, I, Howlin, BJ and Jones, JR (1997) The application of molecular simulation to the rational design of new materials .2. Prediction of the physico-mechanical in properties of linear epoxy systems POLYMER, 38 (17). pp. 4305-4310.

Hamerton, I and Alsop, S (1997) Teaching models CHEMISTRY IN BRITAIN, 33 (7). p. 20.

Hamerton, I, Hay, JN, Howlin, BJ, Jones, JR, Lu, SY, Webb, GA and Bader, MG (1997) Probing the cure of C-13 labelled bisphenol A dicyanate ester in carbon fibre reinforced composites using solid state C-13 NMR, SEM and FTIR POLYMER BULLETIN, 38 (4). pp. 433-438.

Hamerton, I, Hay, JN, Howlin, BJ, Jones, JR, Lu, SY, Webb, GA and Bader, MG (1997) Molecular modelling of interactions at the composite interfaces between electrolytically surface-treated carbon fibre and epoxy resin JOURNAL OF MATERIALS CHEMISTRY, 7 (1). pp. 169-174.

Hamerton, I (1996) High performance polymers POLYMER INTERNATIONAL, 41 (2). pp. 101-102.

Deazle, AS, Hamerton, I, Heald, CR and Howlin, BJ (1996) Molecular modelling of high performance polymers POLYMER INTERNATIONAL, 41 (2). pp. 151-157.

Barton, JM, Hamerton, I, Howlin, BJ, Jones, JR and Liu, SY (1996) Studies of temperature and time-dependent network formation in commercial epoxy resins using modified imidazole curing agents POLYMER INTERNATIONAL, 41 (2). pp. 159-168.

Barton, JM, Hamerton, I, Jones, JR and Stedman, JC (1996) Mechanical properties of tough, high temperature carbon fibre composites from novel functionalized aryl cyanate ester polymers POLYMER, 37 (20). pp. 4519-4528.

Aspin, IP, Hamerton, I, Howlin, BJ, Jones, JR, Parker, MJ, Russell, JC and Vick, TA (1996) Development and application of radio-size-exclusion chromatography JOURNAL OF CHROMATOGRAPHY A, 727 (1). pp. 61-70.

Hamerton, I (1996) High-performance thermoset-thermoset polymer blends: A review of the chemistry of cyanate ester-bismaleimide blends HIGH PERFORMANCE POLYMERS, 8 (1). pp. 83-95.

Hamerton, I, Heald, CR and Howlin, BJ (1996) Molecular modelling of a polyarylethersulfone under bulk conditions MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 4 (2). pp. 151-159.

Hamerton, I, Heald, CR and Howlin, BJ (1996) Molecular simulation of the comparative flexibility of bridging linkages in poly(aryl ether sulfone)s and poly(aryl ether ketone)s from a study of isolated oligomers MACROMOLECULAR THEORY AND SIMULATIONS, 5 (2). pp. 305-320.

Hamerton, I, Howlin, BJ, Jones, JR, Liu, SY and Barton, JM (1996) Preparation of metal aromatic diamine complexes and their influence on the cure of a commercial epoxy resin POLYMER BULLETIN, 36 (3). pp. 295-302.

Barton, JM, Hamerton, I, Rose, JB and Warner, D (1994) Synthesis, characterization and polymerization kinetic study of a series of related addition polyimides High Performance Polymers, 6 (1). pp. 21-34.

Book Section

Hamerton, I and Howlin, BJ (2017) Modern Developments Using Molecular Simulation to Predict the Physical and Mechanical Properties of Polybenzoxazines In: Advanced and Emerging Polybenzoxazine Science and Technology. Elsevier, pp. 111-129. ISBN 9780128041703

Hamerton, I and Howlin, BJ (2017) Predictive Methodology and Properties of Polybenzoxazines In: Advanced and Emerging Polybenzoxazine Science and Technology. Elsevier, pp. 131-145. ISBN 9780128041703

Hamerton, I and Mooring, L (2012) The Use of Thermosets in Aerospace Applications In: Thermosets: Structure, Properties and Applications. Woodhead Publishing, Cambridge, pp. 189-227. ISBN 0857090860

Howlin, BJ, Hamerton, I, Hall, S, Mitchell, A and McNamara, L (2011) Using Molecular Simulation to Predict the Physical and Mechanical Properties of Polybenzoxazines In: Handbook of Benzoxazine Resins. N/a, n/a (5). Elsevier. ISBN 0444537902

Hall, S, Hamerton, I, Howlin, B, Mitchell, A and McNamara, L (2011) Using Molecular Simulation to Predict the Physical and Mechanical Properties of Polybenzoxazines In: Handbook of Benzoxazine Resins. Elsevier. ISBN 0444537910

Hamerton, I (2005) Epoxy Resins In: The Encyclopaedia of Chemical Processing. Taylor & Francis, New York, pp. 911-928. ISBN 0-8247-5563-4

Hamerton, I and Hay, JN (1998) Structural Polymers In: Specialty Polymers. Blackie Academic and Professional, London, pp. 200-250.

Hamerton, I (1994) Introduction to Cyanate Ester Resins In: Chemistry and Technology of Cyanate Ester Resins. Blackie Academic and Professional, Glasgow, pp. 1-6.

Hamerton, I (1994) Properties of Unreinforced Cyanate Ester Resins In: Chemistry and Technology of Cyanate Ester Resins. Blackie Academic and Professional, Glasgow, pp. 193-229.

Report

Hamerton, I (1997) Recent Developments in Epoxy Resins [Report]

Conference or Workshop Item

Suliga, Agnieszka, Hamerton, Ian and Viquerat, Andrew (2017) Improved Thermal Stability of Cycloaliphatic Epoxy Resins by Incorporation of Octa-Functional POSS In: SAMPE 2017, 22 - 25 May 2017, Seattle, USA.

Suliga, A, Viquerat, AD and Hamerton, I (2016) Ultra-thin hybrid organic-inorganic deployable CFRP structures with improved resistance to UV in the space environment In: SAMPE Europe Conference, 2016-09-13 - 2016-09-15, Liège, Belgium.

Hamerton, I (2013) Thermosetting and thermoplastic polymer matrices for composites In: Life Cycle Assessment of Composites, 2013-09-25 - 2013-09-25, Dartington Hall, Totnes.

Hamerton, I, Thompson, S, Howlin, BJ and Stone, CA (2013) Examining the thermal stability and degradation mechanisms of polybenzoxazines and the physical properties of the resulting chars In: Thermosets 2013 From Monomers to Components, 2013-09-18 - 2013-09-20, Berlin.

Hamerton, I, Crawford, AO, Howlin, BJ and Cavalli, G (2013) Examining the thermo-mechanical properties of novel cyanate ester blends through empirical measurement and simulation In: Thermosets 2013 From Monomers to Components, 2013-09-18 - 2013-09-20, Berlin.

Hamerton, I, Howlin, BJ and Wan Hassan, WA (2013) Towards the rational design of polybenzoxazines using molecular simulation In: Thermosets 2013 From Monomers to Components, 2013-09-18 - 2013-09-20, Berlin.

Hamerton, Ian, Anguita, Jose and Silva, S (2013) Towards the rational design of polymers using molecular simulation: predicting the effect of cure schedule on thermo-mechanical properties for a cycloaliphatic amine-cured epoxy resin In: Thermosets 2013 From Monomers to Components, 2013-09-18 - 2013-09-20, Berlin.

Hamerton, I, McNamara, LT and Howlin, BJ (2013) Examining the effects of selected additives on the polymerisation mechanism and network development in aromatic polybenzoxazines In: 246th American Chemical Society National Meeting and Exposition, 2013-09-08 - 2013-09-12, Indianapolis.

Hamerton, I, Thompson, S, Howlin, BJ and Stone, CA (2013) Examining the thermal stability and degradation mechanisms of polybenzoxazines In: 246th American Chemical Society National Meeting and Exposition, 2013-09-08 - 2013-09-12, Indianapolis.

Hamerton, I, Howlin, BJ, Crawford, AO and Cavalli, G (2013) Studying the thermal and mechanical properties of high performance cyanate ester blends In: 4th International Symposium on Thermosets Baekeland 2013, 2013-06-23 - 2013-06-27, Niagara Falls.

Hamerton, I (2011) The development of advanced nanocomposites based on high performance polymers In: Composites Engineering Show, 2011-11-09 - 2011-11-09, National Exhibition Centre Birmingham.

Hamerton, I, Hall, SA, Howlin, BJ, Billaud, C and Ward, S (2011) Development of thermoset modelling and simulation analysis techniques, with a focus towards epoxies In: Thermosets 2011 From Monomers to Components, 2011-09-21 - 2011-09-23, Berlin.

Hamerton, I, McNamara, LT, Howlin, BJ, Smith, PA, Ward, S and Cross, P (2011) Empirical study of the cure of commercially available benzoxazines and initiators using thermo-mechanical and spectroscopic techniques In: Thermosets 2011 From Monomers to Components, 2011-09-21 - 2011-09-23, Berlin.

Hamerton, I, Mitchell, AL and Howlin, BJ (2011) Examining bulk properties of polybenzoxazines In: 2nd International Conference on Thermosets: From Monomers to Components, 2011-09-21 - 2011-09-23, Berlin.

Hamerton, I, Hall, SA, Mitchell, AL and Howlin, BJ (2010) Using structure property relationships in the understanding and molecular design of inherently tough polybenzoxazines In: 239th American Chemical Society National Meeting and Exposition, 2010-03-21 - 2010-03-25, San Francisco.

Hamerton, I and Howlin, BJ (2009) Modern developments in molecular simulation: Studying network development and final properties in high performance polymers In: Thermosets 2009: From Monomers to Components, 2009-09-30 - 2009-10-02, Berlin.

Hamerton, I, Hay, JN, Howlin, BJ and Howgate, GJ (2001) Studies of electron and proton beam curing of epoxy resins In: Polymers in the Third Millennium, 2001-09-02 - 2001-09-06, Montpellier.

Hamerton, I, Hay J N, , Jones J R, and Lu S Y, (2001) Developments and application of new sol-gel based scintillators In: International Liquid Scintillation Spectrometry Conference, 2001-05-07 - 2001-05-11, Karlsruhe.

Hamerton, I, Hay J N, , Howlin, BJ, Howgate, GJ and O'Gara, PM (2001) Electron beam cure of phenylethynyl-terminated oligomers In: Polymer '01, 2001-04-09 - 2001-04-11, Bath.

Hamerton, I, Hay, JN, Jones, JR and Lu, SY (2001) Sol-gel matrices doped with 2,5-diphenyloxazole - development towards a solid tritium sensor In: 7th International Symposium Synthesis and Applications of Isotopically Labelled Compounds, 2000-06-18 - 2000-06-22, Dresden.

Hay, JN, Hamerton, I, Howlin, BJ, Howgate, GJ and O'Gara, PM (2001) Electron-beam cure of phenylethynyl-terminated oligomers. In: 46th International SAMPE Symposium and Exhibition, 2001-05-06 - 2001-05-10, LONG BEACH, CA.

Allington, RD, Attwood, D, Hamerton, I, Hay, JN and Howlin, BJ (1998) A model of the surface of oxidatively treated carbon fibre based on calculations of adsorption interactions with small molecules In: 5th International Conference on Interfacial Phenomena in Composite Materials, 1997-09-01 - 1997-09-03, EGER, HUNGARY.

Hamerton, I, Hay J N, and Shaw S J, (1997) Developments in Thermoset Composites - Technology Transfer from Aerospace? In: 30th ISATA, 1997-06-16 - 1997-06-19, Florence.

Hamerton, I, Aspin I P, , Howlin B J, , Jones J R, and Parker M J, (1997) Kinetic and computer modelling of epoxy resin cure In: Epoxy Technologies for Ambient Cure Protective Coatings, 1997-05-12 - 1997-05-14, Brussels.

Hamerton, I, Kamyszek G, , Howlin B J, and Garbarczyk J, (1997) Prediction of Tg of polyarylethersulphones In: Europhysics Conference on Macromolecular Physics and 4th International Symposium on Thermoplastic Elastomers, 1997-05-05 - 1997-05-08, Kolobrzeg Poland.

Hamerton, I, Hay, JN, Howlin, BJ, Jones J R, , Lu S Y, , Webb G A, and Bader M G, (1996) Surface analysis of carbon fibres using a tritium-hydrogen exchange procedure In: 7th European Conference on Composite Materials 'Realising their Commercial Potential', 1996-05-14 - 1996-05-16, London.

Hamerton, I, Howlin, BJ, Jones, JR, Liu, SY and Barton, JM (1996) Effect of complexation with copper(II) on cured neat resin properties of a commercial epoxy resin using modified imidazole curing agents In: 2nd International Conference on Materials Chemistry (MC2), 1995-07 - ?, KENT, ENGLAND.

Hamerton, I, Heald, CR and Howlin, BJ (1996) Molecular modelling of the physical and mechanical properties of two polycyanurate network polymers In: 2nd International Conference on Materials Chemistry (MC2), 1995-07 - ?, KENT, ENGLAND.

Hamerton, I, Deazle A S, , Heald C R, , Howlin B J, and Barton J M, (1995) Calculations of the physical and mechanical properties of polymers from computer simulation In: SPSJ 44th Annual Meeting, 1995-05-29 - 1995-05-31, Yokohama.

Hamerton, I (1994) Properties of Unreinforced Cyanate Ester Matrix Resins In: American Chemical Society National Fall Meeting, 1994-08-21 - 1994-08-25, Washington DC.

Hamerton, I, Chaplin, A and Howlin, BJ (1994) Thermal properties of functionalised aryl cyanate ester oligomers In: American Chemical Society 208th National Fall Meeting, 1994-08-21 - 1994-08-25, Washington DC.

Hamerton, I, Jones, JR and Barton, JM (1994) The co-reaction of functionalised aryl cyanate esters with bis-maleimides In: American Chemical Society 208th National Fall Meeting, 1994-08-21 - 1994-08-25, Washington DC.

Hamerton, I, Brownhill, A, Cunningham, ID and Howlin, BJ (1994) An investigation into the cyclotrimerisation mechanism of aryl cyanate esters In: American Chemical Society 208th National Fall Meeting, 1994-08-21 - 1994-08-25, Washington DC.

Hamerton, I, Barton, JM, Rose J B, and Warner D, (1991) A comparative study of the thermal behaviour of some bis-maleimides and bis-citraconimides In: 2nd European Symposium on Polyimides and High Temperature Polymers (STEPI 2), 1991-06-04 - 1991-06-07, Montpellier.

Hamerton, I, Crawford, AO, Howlin, BJ and Cavalli, G Novel cayanate ester blends: simulation and experimental thermo-mechanical performance In: 4th International Symposium on Thermosets Baekeland 2013, 2013-06-23 - 2013-06-27, Niagara Falls.

Book

Hamerton, I (2005) W.A.S. Benson: Arts and Crafts Luminary and Pioneer of Modern Design Antiques Collectors' Club, Woodbridge. ISBN 1851494766

Hamerton, I, Azapagic, A and Emsley, AM (2003) Polymers, the Environment and Sustainable Development John Wiley, Chichester. ISBN 0-471-87740-9

Hamerton, I (1994) Chemistry and Technology of Cyanate Ester Resins Blackie Academic and Professional, Glasgow.

Patent

UNSPECIFIED (1998) Unsymmetrical alkenyl cyanate oligomers 2318787 (A).

UNSPECIFIED Novel propenyl-functionalized aromatic compounds 1992/021651.

This list was generated on Mon Sep 25 19:09:48 2017 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800