University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Items where Author is "Chew, J"

Up a level
Export as [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 107.

Article

Noor Mohamed, Sulfickerali, Chew, John and Hills, Nicholas (2017) Effect of bolts on flow and heat transfer in a rotor-stator disc cavity ASME Journal of Engineering for Gas Turbines and Power, 139 (5), 051901.

Pitz, Diogo B., Marxen, Olaf and Chew, John (2017) Onset of convection induced by centrifugal buoyancy in a rotating cavity Journal of Fluid Mechanics, 826. pp. 484-502.

Beard, PF, Chew, J, Gao, F and Chana, KS (2016) UNSTEADY FLOW PHENOMENA IN TURBINE RIM SEALS ASME Journal of Engineering for Gas Turbines and Power, 139 (3), 032501.

Pitz, DB, Chew, J, Marxen, O and Hills, NJ (2016) Direct Numerical Simulation of Rotating Cavity Flows Using a Spectral Element-Fourier Method Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.

Noor Mohamed, S, Chew, J and Hills, N (2016) Flow and windage due to bolts on a rotating disc Journal of Mechanical Engineering Science (Part C, Proc. IMechE).

Lewis, L, Chew, J, Woodley, I, Colbourne, J and Pond, K (2015) The application of computational fluid dynamics and small scale physical models to assess the effects of operational practices on the risk to public health within large indoor swimming pools Journal of Water and Health, 13 (4). pp. 939-952.

Sun, Zhili, Amirante, Dario, Chew, John and Hills, Nicholas (2015) Coupled Aero-Thermal Modeling of a Rotating Cavity with Radial Inflow Journal of Engineering for Gas Turbines and Power: Transactions of the ASME.

Javiya, U, Chew, J, Hills, N and Scanlon, T (2015) Coupled FE-CFD Thermal Analysis for a Cooled Turbine DisK PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE.

Lewis, L, Chew, J, Woodley, I, Colbourne, J and Pond, K (2015) Modifications for water management guidance based on an assessment of swimming pool water consumption of an operational facility in the UK Water Science & Technology: Water Supply.

Fu, D, Chew, John and Sun, Zhili (2014) Velocity pick-up and discharge coefficient for round orifices with cross flow at inlet PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 228 (15). pp. 2728-2737.

Gopal, V, Whiting, MJ, Chew, JW and Mills, S (2013) Thermal contact conductance and its dependence on load cycling INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 66. pp. 444-450.

May, D, Chew, JW and Scanlon, TJ (2013) Prediction of Deswirled Radial Inflow in Rotating Cavities With Hysteresis JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 135 (4), ARTN 0.

Javiya, U, Chew, J, Hills, N, Dullenkopf, K and Scanlon, T (2013) Evaluation of Computational Fluid Dynamics and Coupled Fluid-Solid Modeling for a Direct Transfer Preswirl System JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 135 (5), ARTN 0.

Ganine, V, Javiya, U, Hills, N and Chew, J (2012) Coupled Fluid-Structure Transient Thermal Analysis of a Gas Turbine Internal Air System With Multiple Cavities JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 134 (10), ARTN 1.

Sun, ZX, Chew, JW, Hills, NJ, Lewis, L and Mabilat, C (2012) Coupled Aerothermomechanical Simulation for a Turbine Disk Through a Full Transient Cycle J TURBOMACH, 134 (1), 011014.

Sun, Z, Chew, JW, Hills, NJ, Barnes, CJ and Valencia, AG (2012) 3D coupled fluid-solid thermal simulation of a turbine disc through a transient cycle Proceedings of the ASME Turbo Expo, 4 (PARTS). pp. 1959-1969.

Javiya, U, Chew, J, Hills, N, Dullenkopf, K and Scanlon, T (2012) Evaluation of CFD and coupled fluid-solid modelling for a direct transfer pre-swirl system Proceedings of the ASME Turbo Expo, 4 (PARTS). pp. 2179-2190.

May, D, Chew, JW and Scanlon, TJ (2012) Prediction of de-swirled radial inflow in rotating cavities with hysteresis Proceedings of the ASME Turbo Expo, 4 (PARTS). pp. 2037-2046.

Vinod Kumar, BG, Chew, John and Hills, Nicholas (2012) Rotating flow and heat transfer in cylindrical cavities with radial inflow Proceedings of the ASME Turbo Expo, 4 (PARTS). pp. 2047-2060.

O'Mahoney, T, Hills, N and Chew, J (2012) Sensitivity of LES results from turbine rim seals to changes in grid resolution and sector size Progress in Aerospace Sciences.

Woodland, S, Crocombe, AD, Chew, JW and Mills, SJ (2011) A New Method for Measuring Thermal Contact Conductance-Experimental Technique and Results JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 133 (7), ARTN 0.

Javiya, U, Chew, JW, Hills, NJ, Zhou, L, Wilson, M and Lock, GD (2011) CFD analysis of flow and heat transfer in a direct transfer preswirl system Journal of Turbomachinery, 134 (3).

Chew, J (2011) Editorial Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225 (11). pp. 2479-2480.

O'Mahoney, TSD, Hills, Nicholas, Chew, John and Scanlon, T (2011) Large-Eddy simulation of rim seal ingestion PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 225 (C12). pp. 2881-2891.

Sun, Z, Chew, J, Hills, N, Volkov, K and Barnes, C (2010) Efficient Finite Element Analysis/Computational Fluid Dynamics Thermal Coupling for Engineering Applications Journal of Turbomachinery, 132 (3).

Chew, J and Robins, A (2010) Guest Editorial: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (3). i-ii.

Chew, J and Robins, A (2010) Guest Editorial: Special section on engineering in a changing climate PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 224 (3). I-II.

Chew, JW and Hills, NJ (2009) Computational fluid dynamics and virtual aeroengine modelling PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 223 (12). pp. 2821-2834.

Sun, Zixiang, Chew, J, Fomison, N and Edwards, D (2009) Analysis of fluid flow and heat transfer in industrial fluid couplings P I MECH ENG C-J MEC, 223 (9). pp. 2049-2062.

Chew, JW (2009) Developments in turbomachinery internal air systems Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (1). pp. 189-234.

Chew, JW and Hills, NJ (2007) Computational fluid dynamics for turbomachinery internal air systems PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 365 (1859). pp. 2587-2611.

Ciampoli, F, Chew, JW, Shahpar, S and Willocq, E (2007) Automatic optimization of preswirl nozzle design JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 129 (2). pp. 387-393.

Sun, Zixiang, Lindblad, K, Chew, John and Young, C (2007) LES and RANS investigations into buoyancy-affected convection in a rotating cavity with a central axial throughflow Journal of Engineering for Gas Turbines and Power, 129 (2). pp. 318-325.

Ciampoli, F, Chew, JW, Shahpar, S and Willocq, E (2006) Automatic optimisation of pre-swirl nozzle design Proceedings of the ASME Turbo Expo 2006, Vol 3, Pts A and B. pp. 1345-1353.

Lelli, D, Chew, JW and Cooper, P (2006) Combined three-dimensional fluid dynamics and mechanical modeling of brush seals JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 128 (1). pp. 188-195.

Boudet, J, Hills, NJ and Chew, JW (2006) Numerical simulation of the flow interaction between turbine main annulus and disc cavities Proceedings of the ASME Turbo Expo, 6 PART. pp. 553-562.

Chew, JW and Guardino, C (2004) Simulation of flow and heat transfer in the tip region of a brush seal INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 25 (4). pp. 649-658.

Guardino, C and Chew, JW (2004) Numerical simulation of 3D bristle bending in brush seals Proceedings of the ASME Turbo Expo 2004, 4. pp. 277-288.

Sun, Zixiang, Chew, John, Kifoil, A and Hills, Nicholas (2004) Numerical simulation of natural convection in stationary and rotating cavities Proceedings of the ASME Turbo Expo 2004, 4. pp. 381-389.

Cao, C, Chew, John, Millington, PR and Hogg, SI (2003) Interaction of rim seal and annulus flows in an axial flow turbine American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 1011-1019.

Chew, JW, Hills, NJ, Turner, AB, Khalatov, S and Scanlon, T (2003) Measurement and analysis of flow in a pre-swirled cooling air delivery system American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 5 B. pp. 913-920.

Guardino, C, Chew, JW and Hills, NJ (2002) Calculation of surface roughness effects on air-riding seals American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B. pp. 795-803.

Smout, PD, Chew, JW and Childs, PRN (2002) ICAS-GT: A European collaborative research programme on internal cooling air systems for gas turbines American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B. pp. 907-914.

Gentilhomme, O, Hills, Nicholas, Turner, AB and Chew, John (2002) Measurement and analysis of ingestion through a turbine rim seal American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 3 B. pp. 925-934.

Hills, NJ, Chew, JW and Turner, AB (2001) Computational and mathematical modelling of turbine rim seal ingestion Proceedings of the ASME Turbo Expo, 3.

Verdicchio, JA, Chew, JW and Hills, NJ (2001) Coupled fluid/solid heat transfer computation for turbine discs Proceedings of the ASME Turbo Expo, 3.

Kassimatis, PG, Bergeles, GC, Jones, TV and Chew, JW (2000) Numerical investigation of the aerodynamics of the near-slot film cooling INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 32 (1). pp. 97-117.

Chew, JW, Vahdati, M and Imregun, M (1998) Predicted influence of intake acoustics upon part-speed fan flutter American Society of Mechanical Engineers (Paper) (GT).

Chew, JW and Hogg, SI (1997) Porosity modeling of brush seals JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 119 (4). pp. 769-775.

Hanby, RF, Silvester, DJ and Chew, JW (1996) A comparison of coupled and segregated iterative solution techniques for incompressible swirling flow INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 22 (5). pp. 353-373.

Chew, JW, Lapworth, BL and Millener, PJ (1995) Mathematical modeling of brush seals INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 16 (6). pp. 493-500.

Chew, JW, Green, T and Turner, AB (1994) Rim sealing of rotor-stator wheelspaces in the presence of external flow American Society of Mechanical Engineers (Paper). pp. 1-12.

Virr, GP, Chew, JW and Coupland, J (1993) Application of computational fluid dynamics to turbine disc cavities American Society of Mechanical Engineers (Paper).

Dadkhah, S, Turner, AB and Chew, JW (1991) Performance of radial clearance rim seals in upstream and downstream rotor-stator wheelspaces American Society of Mechanical Engineers (Paper).

Chew, JW, Dadkhah, S and Turner, AB (1991) Rim sealing of rotor-stator wheelspaces in the absence of external flow American Society of Mechanical Engineers (Paper).

Lapworth, BL and Chew, JW (1990) Numerical study of the influence of disc geometry on the flow and heat transfer in a rotating cavity American Society of Mechanical Engineers (Paper).

Farthing, PR, Chew, JW and Owen, JM (1989) Use of De-swirl nozzles to reduce the pressure drop in a rotating cavity with a radial inflow American Society of Mechanical Engineers (Paper).

Chew, JW, Farthing, PR, Owen, JM and Stratford, B (1989) Use of fins to reduce the pressure drop in a rotating cavity with a radial inflow Journal of Turbomachinery, 111 (3). pp. 349-356.

Chew, JW (1987) COMPUTATION OF FLOW AND HEAT TRANSFER IN ROTATING DISC SYSTEMS. 2nd ASME-JSME Thermal Engineering Conference, 3. pp. 361-367.

Conference or Workshop Item

Sun, Zixiang and Chew, John (2017) Study of a conceptual design for cooled cooling air in a Preswirl Cavity In: ISABE 2017, 3 -8 September 2017, Manchester, UK.

Kumar, Ramesh, Chew, John, Amirante, Dario, Murua, J and Hills, Nicholas (2017) CFD Simulation of Blade Flows With High Amplitude Pitching In: ASME 2017 Turbomachinery Technical Conference & Exposition (Turbo Expo), 2017-06-26 - 2017-06-30, Charlotte, North Carolina, USA.

Gao, Feng, Chew, John, Beard, PF, Amirante, Dario and Hills, Nicholas (2017) Numerical Studies of Turbine Rim Sealing Flows on a Chute Seal Configuration In: 12th European Turbomachinery Conference, 2017-04-03 - 2017-04-07, Stockholm, Sweden.

Chew, J, Pitz, DB, Marxen, O and Hills, N (2016) DIRECT NUMERICAL SIMULATION OF ROTATING CAVITY FLOWS USING A SPECTRAL ELEMENT-FOURIER METHOD In: ASME Turbo Expo 2016:, 2016-06-13 - 2016-06-17, Seoul, Korea.

Noor Mohamed, S, Chew, J and Hills, NJ (2016) EFFECT OF BOLTS ON FLOW AND HEAT TRANSFER IN A ROTOR-STATOR DISC In: ASME Turbo Expo 2016, 2016-06-13 - 2016-06-17, Seoul, South Korea.

Chew, J, Onori, M, Amirante, D and Hills, NJ (2016) LES VALIDATION FOR A ROTATING CYLINDRICAL CAVITY WITH RADIAL INFLOW In: ASME Turbo Expo 2016, 2016-06-13 - 2016-06-16, Seoul, South Korea.

Amirante, D, Sun, Z, Chew, JW, Hills, NJ and Atkins, NR (2016) MODELING OF COMPRESSOR DRUM CAVITIES WITH RADIAL INFLOW In: ASME Turbo Expo 2016 Power for Land, Sea and Air, 2016-06-13 - 2016-06-17, Seoul, South Korea.

Beard, PF, Chew, J, Gao, F and Chana, KS (2016) UNSTEADY FLOW PHENOMENA IN TURBINE RIM SEALS In: ASME Turbo Expo 2016., 2016-06-14 - 2016-06-17, Seoul, South Korea.

Pitz, DB and Chew, JW (2015) Numerical simulation of natural convection in a differentially heated tall enclosure using a spectral element method In: 23rd ABCM International Congress of Mechanical Engineering - COBEM2015, 2015-12-06 - 2015-12-11, Rio de Janeiro. (Unpublished)

Koli, B, Chew, JW, Hills, NJ and Scanlon, T (2014) CFD INVESTIGATION OF A FLUIDIC DEVICE FOR MODULATION OF AERO-ENGINE COOLING AIR In: ASME Turbo Expo: Turbine Technical Conference and Exposition, 2014-06-16 - 2014-06-20, Dusseldorf, GERMANY.

May, D and Chew, JW (2014) A MODEL FOR THE TRANSIENT BEHAVIOR OF VORTEX AMPLIFIERS In: ASME Turbo Expo: Turbine Technical Conference and Exposition, 2014-06-16 - 2014-06-20, Dusseldorf, GERMANY.

Gopal, V, Whiting, MJ, Chew, JW and Mills, S (2012) FINITE ELEMENT ANALYSIS AS A TOOL FOR CALCULATING THE THERMAL CONTACT CONDUCTANCE FOR A MACHINED SURFACE In: ASME Summer Heat Transfer Conference (SHTC), 2012-07-08 - 2012-07-12, Rio Grande, PR.

Javiya, U, Chew, J, Hills, N and Scanlon, T (2011) A comparative study of cascade vanes and drilled nozzle designs for pre-swirl In: ASME Turbo Expo 2011, 2011-06-06 - 2011-06-10.

Javiya, U, Chew, J, Hills, N, Zhou, L, Wilson, M and Lock, G (2010) CFD ANALYSIS OF FLOW AND HEAT TRANSFER IN A DIRECT TRANSFER PRE-SWIRL SYSTEM In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

Sun, Z, Chew, JW, Hills, NJ, Lewis, L and Mabilat, C (2010) COUPLED AERO-THERMO-MECHANICAL SIMULATION FOR A TURBINE DISC THROUGH A FULL TRANSIENT CYCLE In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

O'Mahoney, TSD, Hills, Nicholas, Chew, John and Scanlon, T (2010) LARGE-EDDY SIMULATION OF RIM SEAL INGESTION In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

May, D and Chew, JW (2010) RESPONSE OF A DISK CAVITY FLOW TO GAS TURBINE ENGINE TRANSIENTS In: ASME Turbo Expo 2010, 2010-06-14 - 2010-06-18, Glasgow, SCOTLAND.

Kilfoil, ASR and Chew, JW (2009) Modelling of buoyancy-affected flow in co-rotating disc cavities In: ASME Turbo Expo 2009: Power for Land, Sea, and Air (GT2009), 2009-06-08 - 2009-06-12, Orlando, USA.

Lott, PT, Hills, NJ, Chew, JW, Scanlon, T and Shahpar, S (2009) HIGH PRESSURE TURBINE STAGE ENDWALL PROFILE OPTIMISATION FOR PERFORMANCE AND RIM SEAL EFFECTIVENESS In: 54th ASME Turbo Expo 2009, 2009-06-08 - 2009-06-12, Orlando, FL.

Hutcheson, PS, Chew, JW, Thorpe, RB, Young, C and Regan, NJ (2009) MODELLING OF LIQUID LEAKAGE SPRAYS IN CROSSFLOW In: 54th ASME Turbo Expo 2009, 2009-06-08 - 2009-06-12, Orlando, FL.

Sun, Z, Chew, JW and Fomison, N (2009) Numerical simulation of complex air flow in an aeroengine gear box In: ASME Turbo Expo 2009: Power for Land, Sea, and Air (GT2009), 2009-06-08 - 2009-06-12, Orlando, USA.

Chew, J (2009) USE OF CFD FOR THERMAL COUPLING IN AEROENGINE INTERNAL AIR SYSTEMS APPLICATIONS In: The 4th International Symposium on Fluid Machinery and Fluid Engineering, 2008-11-24 - 2008-11-27, Beijing, China.

Hutcheson, PS, Chew, JW, Thorpe, RB and Young, C (2008) ASSESSMENT OF MODELS FOR LIQUID JET BREAKUP In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Sun, Z, Chew, JW, Hills, NJ, Volkov, KN and Barnes, CJ (2008) EFFICIENT FEA/CFD THERMAL COUPLING FOR ENGINEERING APPLICATIONS In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Woodland, S, Crocombe, AD, Chew, JW and Mills, SJ (2008) A NEW METHOD FOR MEASURING THERMAL CONTACT CONDUCTANCE EXPERIMENTAL TECHNIQUE AND RESULTS In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Volkov, KN, Hills, NJ and Chew, JW (2008) SIMULATION OF TURBULENT FLOWS IN TURBINE BLADE PASSAGES AND DISC CAVITIES In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Ciampoli, F, Hills, NJ, Chew, JW and Scanlon, T (2008) UNSTEADY NUMERICAL SIMULATION OF THE FLOW IN A DIRECT TRANSFER PRE-SWIRL SYSTEM In: 53rd ASME Turbo Expo 2008, 2008-06-09 - 2008-06-13, Berlin, GERMANY.

Chew, J, Autef, V, Hills, N and Brunton, I (2007) Turbine Stator-well flow modelling In: 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, 2007-07-02 - 2007-07-05, Lyon, Francis.

Sun, Zixiang, Lindblad, K, Chew, John and Young, C (2006) LES and RANS investigations into buoyancy-affected convection in a rotating cavity with a central axial throughflow In: 51st ASME Turbo Expo, 2006-05-06 - 2006-05-11, Barcelona, SPAIN.

Boudet, J, Autef, VND, Chew, JW, Hills, NJ and Gentilhomme, O (2005) Numerical simulation of rim seal flows in axial turbines In: RAeS Aerospace Aerodynamics Research Conference, 2004-09 - ?, London, ENGLAND.

Guardino, C and Chew, JW (2005) Numerical simulation of three-dimensional bristle bending in brush seals In: International Gas Turbine and Aeroengine Congress and Exhibition, 2004-06-13 - 2004-06-17, Vienna, AUSTRIA.

Lelli, D, Chew, JW and Cooper, P (2005) Combined 3D fluid dynamics and mechanical modelling of brush seals In: 50th ASME Turbo-Expo, 2005-06-06 - 2005-06-09, Reno, NV.

Young, C and Chew, JW (2005) Evaluation of the volume of fluid modelling approach for simulation of oil/air system flows In: 50th ASME Turbo-Expo, 2005-06-06 - 2005-06-09, Reno, NV.

Chew, JW, Ciampoli, F, Hills, NJ and Scanlon, T (2005) Pre-swirled cooling air delivery system performance In: 50th ASME Turbo-Expo, 2005-06-06 - 2005-06-09, Reno, NV.

Cao, C, Chew, John, Millington, PR and Hogg, SI (2004) Interaction of rim seal and annulus flows in an axial flow turbine In: International Gas Turbine and Aeroengine Congress and Exhibition, 2003-06-16 - 2003-06-19, ATLANTA, GA.

Guardino, C, Chew, JW and Hills, NJ (2004) Calculation of surface roughness effects on air-riding seals In: 47th International Gas Turbine and Aeroengine Congress and Exhibition, 2002-06-03 - 2002-06-06, AMSTERDAM, NETHERLANDS.

Gentilhomme, O, Hills, Nicholas, Turner, AB and Chew, John (2003) Measurement and analysis of ingestion through a turbine rim seal In: International Gas Turbine and Aeroengine Congress and Exhibition, 2002-06-03 - 2002-06-06, AMSTERDAM, NETHERLANDS.

Hills, NJ, Chew, JW and Turner, AB (2002) Computational and mathematical modeling of turbine rim seal ingestion In: 46th International Congress and Exhibition on Gas Turbines and Aeroengines, 2001-06-04 - 2001-06-07, NEW ORLEANS, LOUISIANA.

Chen, LH, Wood, PE, Jones, TV and Chew, JW (2000) Detailed experimental studies of flow in large scale brush seal model and a comparison with CFD predictions In: International Gas Turbine and Aeroengine Congress and Exhibition, 1999-06-07 - 1999-06-10, INDIANAPOLIS, INDIANA.

Chen, LH, Wood, PE, Jones, TV and Chew, JW (1999) An iterative CFD and mechanical brush seal model and comparison with experimental results In: International Gas Turbine and Aeroengine Congress and Exhibition, 1998-06-02 - 1998-06-05, STOCKHOLM, SWEDEN.

Turner, MT, Chew, JW and Long, CA (1998) Experimental investigation and mathematical modeling of clearance brush seals In: 42nd International Gas Turbine and Aeroengine Congress and Exhibition, 1997-06-02 - 1997-06-05, ORLANDO, FLORIDA.

Wang, Z, Ireland, PT, Kohler, ST and Chew, JW (1998) Heat transfer measurements to a gas turbine cooling passage with inclined ribs In: 41st International Gas Turbine and Aeroengine Congress and Exhibition, 1996-06-10 - 1996-06-13, BIRMINGHAM, ENGLAND.

Chew, JW, Taylor, IJ and Bonsell, JJ (1996) CFD developments for turbine blade heat transfer In: 3rd International Conference on Computers in Reciprocating Engines and Gas Turbines, 1996-01-09 - 1996-01-10, INST MECH ENGINEERS, LONDON, ENGLAND.

Chew, JW, Green, T and Turner, AB (1994) Rim sealing of rotor-stator wheelspaces in the presence of external flow

Chew, JW (1989) A theoretical study of ingress for shrouded rotating disc systems with radial outflow

Farthing, PR, Chew, JW and Owen, JM (1989) The use of de-swirl nozzles to reduce the pressure drop in a rotating cavity with a radial inflow

Chew, JW and Vaughan, CM (1988) Numerical predictions for the flow induced by an enclosed rotating disc

Chew, JW and Snell, RJ (1988) Prediction of the pressure distribution for radial inflow between co-rotating discs

This list was generated on Wed Nov 22 23:04:21 2017 UTC.

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800