University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Nanostructured Zinc Oxide Sensors.

Alenezi, Mohammad Rabia. (2014) Nanostructured Zinc Oxide Sensors. Doctoral thesis, University of Surrey (United Kingdom)..

Available under License Creative Commons Attribution Non-commercial Share Alike.

Download (15MB) | Preview


This thesis focuses on the hydrothermal synthesis of different ZnO nanostructures where rational control over their morphology allows for the optimization of the different morphologies for a range of sensing applications. ZnO nanostructures with different dimensionalities have been synthesized through low temperature hydrothermal techniques. One dimensional ZnO NWs have been synthesized with and without the assistance of a seed layer, with a higher degree of control over their structure, morphology, density and dimensions. The large scale production of two dimensional ZnO nanodisks with a high fraction of exposed polar facets have also been produced through using zinc counter ions with preferential capping capabilities on defined facets. Furthermore, using a multistage hydrothermal synthesis, a range of three dimensional hierarchical ZnO nanostructures grown from initial mono-morphological ZnO nanostructures/seeds has been reported. The growth parameters, such as the nutrient concentration, quantity of polyethylenimine, growth time, and zinc counter ions have had a substantial impact on the morphological properties of the grown structures. Nanostructured ZnO sensors have been fabricated and tested for the applications of ultraviolet detection and gas sensing. The performance of ZnO nanostructured ultraviolet detectors based on different device configurations including; thin film, nanowire array, single nanowires, bridging nanowires, and bridging nanosyringes have been investigated and compared. The device structures which evolve from thin films to bridging nanosyringe detectors show inproved photosensitivity by five orders of magnitude and with response time decreasing from 890 s to 90 ms. Gas sensors based on ZnO nanostructures with different dimensionalities have been fabricated and analysed. The effect of the exposed polar facets on sensing properties of ZnO nanostructures has been investigated and found to play a crucial role in the overall performance of the gas sensors. Ultraviolet activation mechanisms for ZnO gas sensors has been presented and discussed as a substitute to conventional thermal activation. Finally, an effective approach to enhance the performance of ZnO nanostructured gas sensors by using hierarchical structures instead of their mono-morphological counterparts has been demonstrated. Hierarchically ZnO structures display an enhancement of gas sensing performance and exhibit significantly inproved sensitivity and fast response to gases in comparison to other mono-morphological ZnO, such as nanoparticles, nanowires, or nanodisks. In addition to the high surface-to-volume ratio due to its small size, the nanowire building blocks show the enhanced gas sensing properties mainly ascribed to the increased proportion of exposed active (0001) planes, and the formation of many nanojunctions at the interface between initial ZnO nanostructure and secondary nanowires. Based on the research contained in this thesis, we propose using the developed hydrothermal synthesis techniques to fabricate nanostructured devices such as piezoelectric generators, self-powered piezoelectric gas sensors and ultraviolet detectors, self-activated gas sensors, and photocatalyst.

Item Type: Thesis (Doctoral)
Divisions : Theses
Authors : Alenezi, Mohammad Rabia.
Date : 2014
Additional Information : Thesis (Ph.D.)--University of Surrey (United Kingdom), 2014.
Depositing User : EPrints Services
Date Deposited : 24 Apr 2020 15:26
Last Modified : 24 Apr 2020 15:26

Actions (login required)

View Item View Item


Downloads per month over past year

Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800