University of Surrey

Test tubes in the lab Research in the ATI Dance Research

Analytical experimental modelling of timber concrete composite beams.

Inniss, Clifton F. (1994) Analytical experimental modelling of timber concrete composite beams. Doctoral thesis, University of Surrey (United Kingdom)..

Full text is not currently available. Please contact sriopenaccess@surrey.ac.uk, should you require it.

Abstract

This thesis investigates the behaviour of timber-concrete composite beams with mechanical shear connectors. The analysis of these structures is complex due to the discontinuity caused by slip at the interface between the timber and concrete and can only be achieved by the use of sophisticated analytical techniques. A literature review has been carried out highlighting the fact that only a limited amount of theoretical and experimental work exists on timber- concrete composite beams. The fundamental objectives of this study were to develop suitable analytical and experimental models so as to better understand the behaviour of these structures. Fifty seven push-out specimens and seven beams were tested in order to determine the load/slip characteristics of the coach screw connectors and how these influence the behaviour of the beams. It was found that the bond and friction at the timber-concrete interface had a significant effect on the behaviour of the joints and beams. Analyses were carried out using a fully non-linear finite element package, LUSAS. The finite element model developed consisted of standard two dimensional elements and the results from the beam tests were used in a validation exercise. In general, good agreement was obtained for the stiffness of the beams throughout their loading history. Studies were carried out using the analytical model to determine the influence of the main parameters on the stiffness of the beams. The connector stiffness and timber properties were found to have a strong influence while the concrete properties were not significant at working load level. Further analytical studies were carried out for a wide range of geometric properties. The information obtained was used in the formulation of a design procedure which allowed for slip at the interface of the beams. Recommendations are included for future research on timber-concrete composite beams.

Item Type: Thesis (Doctoral)
Divisions : Theses
Authors :
NameEmailORCID
Inniss, Clifton F.UNSPECIFIEDUNSPECIFIED
Date : 1994
Contributors :
ContributionNameEmailORCID
http://www.loc.gov/loc.terms/relators/THSUNSPECIFIEDUNSPECIFIEDUNSPECIFIED
Depositing User : EPrints Services
Date Deposited : 09 Nov 2017 12:11
Last Modified : 09 Nov 2017 14:39
URI: http://epubs.surrey.ac.uk/id/eprint/842780

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year


Information about this web site

© The University of Surrey, Guildford, Surrey, GU2 7XH, United Kingdom.
+44 (0)1483 300800